Ръководство за потребителя на модулна линейна карта Cisco A9K-MOD200-TR ASR 9000 200G

1. Въведение

This manual provides essential information for the safe and effective use of the Cisco A9K-MOD200-TR ASR 9000 200G Modular Line Card. This line card is designed to integrate into Cisco ASR 9000 Series Aggregation Services Routers, enhancing their capacity and functionality with 200 Gigabit Ethernet connectivity. It is crucial to read and understand all instructions before installation and operation to ensure proper functionality and system stability.

2. Информация за безопасност

Спазвайте следните предпазни мерки, за да предотвратите наранявания и повреда на оборудването:

• Електрическа безопасност: Always disconnect power from the router chassis before installing or removing the line card.
• Електростатичен разряд (ESD): Wear an ESD-preventive wrist strap connected to a grounded surface when handling the line card. Store the card in an anti-static bag when not installed.
• Тегло: The line card weighs approximately 15 pounds (6.8 kg). Use proper lifting techniques and ensure secure handling during installation.
• Вентилация: Ensure adequate airflow around the router chassis to prevent overheating.
• Квалифициран персонал: Installation and maintenance should only be performed by trained and qualified personnel.

3. Съдържание на пакета

Проверете дали вашият пакет съдържа следните елементи:

• Cisco A9K-MOD200-TR ASR 9000 200G Modular Line Card
• Documentation CD (may contain software drivers or additional manuals)

Ако някои от артикулите липсват или са повредени, незабавно се свържете с вашия доставчик.

4. Физическо описание

The Cisco A9K-MOD200-TR is a modular line card designed for hot-swappable installation into compatible slots within the Cisco ASR 9000 Series router chassis. It features a robust metal casing for durability and efficient heat dissipation.

Figure 1: Cisco A9K-MOD200-TR ASR 9000 200G Modular Line Card. The image displays the line card from two perspectives. The upper view shows the top of the card, revealing internal components and the chassis structure. The lower view focuses on the rear panel, showcasing multiple high-density Ethernet ports and potentially a USB port, which are used for network connectivity and management within the router chassis.

The front panel (when installed) typically includes status indicator LEDs and potentially handles for insertion and extraction. The rear panel, visible in the lower part of Figure 1, houses the high-speed data connectors that interface with the router's backplane and external network cables.

5. Монтаж

Follow these general steps for installing the line card. Always refer to the specific Cisco ASR 9000 Series Router hardware installation guide for detailed, model-specific instructions.

1. Подготовка на шасито: Ensure the router chassis is powered off and disconnected from all power sources.
2. ESD защита: Put on an ESD-preventive wrist strap and connect it to a grounded surface.
3. Намерете слота: Identify an available, compatible slot in the ASR 9000 chassis. Remove any blank filler panels from the slot.
4. Insert Line Card: Carefully align the line card with the guides in the chassis slot. Push the card firmly and evenly into the slot until it is fully seated.
5. Сигурна карта: Use the ejector levers or captive screws on the line card's front panel to secure it into the chassis.
6. Свързване на кабели: Connect appropriate network cables to the ports on the line card's front panel.
7. Включване: Reconnect power to the router chassis and power it on. Observe the status LEDs on the line card for proper initialization.

6. Работа и конфигурация

Once installed, the Cisco A9K-MOD200-TR line card becomes an integral part of the ASR 9000 router. Its operation is managed through the router's operating system, Cisco IOS XR.

• Първоначално стартиране: The router will detect the new line card during boot-up or when inserted (if hot-swappable).
• Конфигурация: All configuration of the 200G Ethernet interfaces on the line card is performed via the router's Command-Line Interface (CLI) or a network management system. This includes setting IP addresses, routing protocols, VLANs, and other network parameters.
• Мониторинг: Use CLI commands or network monitoring tools to check the status, performance, and traffic statistics of the line card's interfaces.

Refer to the Cisco IOS XR documentation for detailed configuration guides specific to your router model and software version.

7. Поддръжка

Regular maintenance ensures the longevity and optimal performance of your line card:

• Почистване: Periodically inspect the line card and router chassis for dust accumulation. Use compressed air to gently clean vents and surfaces. Ensure the router is powered off before cleaning.
• Актуализации на фърмуера: Keep the router's IOS XR software and line card firmware updated to the latest stable versions recommended by Cisco. Refer to Cisco's official website for update procedures and files.
• Контрол на околната среда: Maintain the operating environment within specified temperature and humidity ranges to prevent hardware degradation.

8. Отстраняване на проблеми

If you encounter issues with the line card, consider the following troubleshooting steps:

• Проверете местата за сядане: Ensure the line card is fully and securely seated in its slot. Re-seat if necessary (after powering off the chassis).
• Светодиоди за състояние: Observe the status LEDs on the line card. Consult the router's documentation for the meaning of different LED states (e.g., amber for fault, green for operational).
• Console Messages: Connect to the router's console port and check for any error messages or diagnostic output related to the line card.
• Кабелни връзки: Verify that all network cables are correctly connected and not damaged.
• Конфигурация на софтуера: Review the router's configuration to ensure the interfaces on the line card are correctly configured and enabled.
• Поддръжка на Cisco: For persistent issues, consult Cisco's official documentation, knowledge base, or contact Cisco Technical Assistance Center (TAC).

9. Спецификации

Key technical specifications for the Cisco A9K-MOD200-TR ASR 9000 200G Modular Line Card:

10. Гаранция и поддръжка

This Cisco A9K-MOD200-TR line card is listed as "Renewed."

• Renewed Product Warranty: For specific warranty details, please refer to the terms and conditions provided by the seller (Refurb Rack) or the Amazon Renewed program at the time of purchase. Renewed products typically come with a limited warranty from the seller or platform.
• Поддръжка на производителя: For original product documentation, technical specifications, and software downloads, please visit the official Cisco Systems website. Note that direct manufacturer support for renewed products may vary.

It is recommended to retain your purchase receipt and any warranty information provided by the seller for future reference.