1. Въведение
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.

Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. Информация за безопасност
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- Винаги носете подходящи предпазни средства, като например предпазни очила, по време на монтажа.
- Use only the tools specified in the installation guide.
- Дръжте малките части далеч от деца.
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. Съдържание на пакета
Преди да започнете монтажа, проверете дали всички компоненти са налични:
- Външна дръжка
- Interior Accent Lever Assembly
- Заключващ механизъм
- Ударна плоча
- Монтажни винтове и крепежни елементи
- Шаблон за монтаж (ако е включен)
- Ключове (ако е приложимо)
4. Настройка и инсталация
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 Подготовка на вратата
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 Монтиране на накрайника
- Подравнете насрещната планка с резето на рамката на вратата.
- Mark and chisel out the necessary area for a flush fit, if required.
- Закрепете насрещната плоча с предоставените винтове.
5. Инструкции за работа
To operate your Schlage Addison Handleset:
- Да заключа: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- За отключване: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- За отваряне: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. Поддръжка
Proper maintenance ensures the longevity and smooth operation of your handleset.
- Почистване: Почиствайте редовно дръжката с мека,amp кърпа. Избягвайте абразивни почистващи препарати, разтворители или агресивни химикали, тъй като те могат да повредят покритието.
- Смазване: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- затягане: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7. Отстраняване на проблеми
| проблем | Възможна причина | Решение |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| Key does not turn smoothly | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| Вратата не се заключва правилно | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | Mounting screws are loose | Затегнете всички видими монтажни винтове. |
8. Спецификации
- Номер на модела: 163604
- марка: ШЛАЖ
- материал: Метал
- цвят: Сатен никел
- Завършете: Сатен
- стил: Модерен
- Размери на продукта: 16.51 x 20.32 x 52.07 см (6.5 x 8 x 20.5 инча)
- Тегло на артикула: 2.04 кг (4.5 фунта)
- Тип дръжка: Лост
- Специална функция: Easy to Install, Patented adjustable bottom thru-bolt
- производител: Allegion Canada Inc
- Страна на произход: Мексико
9. Гаранция и поддръжка
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webсайта или вижте гаранционната карта, приложена към вашия продукт.
За допълнителна помощ, моля, посетете Магазин ШЛАГЕ.





