Breadman Breadmaker Model TR-600 User Manual

Важни инструкции за безопасност

Please read all instructions carefully before using your Breadman Breadmaker. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Винаги изключвайте уреда от контакта, когато не го използвате и преди почистване.
• Не потапяйте уреда, кабела или щепсела във вода или други течности.
• Необходим е строг надзор, когато който и да е уред се използва от или в близост до деца.
• Не работете с уред с повреден кабел или щепсел, или след като уредът не функционира или е бил повреден по някакъв начин.
• Уредът е само за домашна употреба. Да не се използва на открито.
• ВНИМАНИЕ: Steam vent is very hot during baking. Do not touch this top lid. Do not place anything on this top lid.

Продуктът е свършилview

Familiarize yourself with the components of your Breadman Breadmaker Model TR-600.

Figure 1: Breadman Breadmaker Model TR-600. Това изображение показва предната част view of the white Breadman Breadmaker. The top lid features a viewing window and a caution sticker regarding hot steam. On the right side of the appliance, the control panel is visible, featuring "COURSE SELECT" buttons, "SELECT" buttons, and large "START" and "STOP" buttons. Below the control panel, the "Breadman Plus" logo is prominently displayed on the front casing.

Главни компоненти:

• Основен модул: Houses the heating element and motor.
• Тава за хляб: Removable pan for baking bread.
• Месеща лопатка: Прикрепя се към вала в тавата за хляб за смесване и месене на тесто.
• Контролен панел: For selecting programs and controlling operation.
• Капак с Viewing прозорец: Позволява наблюдение на процеса на печене.

Настройка

1. Разопаковане: Внимателно извадете хлябопекаря и всички аксесоари от опаковката. Запазете опаковката за бъдещо съхранение или транспортиране.
2. Първоначално почистване: Before first use, wipe the exterior of the breadmaker with a damp cloth. Wash the bread pan and kneading paddle with warm, soapy water, rinse thoroughly, and dry completely. Do not use abrasive cleaners.
3. Разположение: Place the breadmaker on a stable, flat, heat-resistant surface, away from direct sunlight and heat sources. Ensure adequate ventilation around the appliance.
4. Захранване: Включете захранващия кабел в заземен електрически контакт.

Инструкция за работа

Добавяне на съставки:

Always add ingredients in the order specified by your recipe, typically liquids first, followed by dry ingredients, with yeast added last on top of the flour to prevent premature activation.

1. Attach the kneading paddle to the shaft inside the bread pan.
2. Add all liquid ingredients to the bread pan.
3. Add dry ingredients, ensuring the yeast does not come into direct contact with liquids or salt initially.
4. Place the bread pan securely into the breadmaker unit. Close the lid.

Control Panel and Program Selection:

The control panel allows you to choose from various bread programs. Use the "COURSE SELECT" buttons to navigate and the "SELECT" button to confirm your choice.

Стартиране и спиране:

• Да започна: След като изберете желаната програма, натиснете СТАРТ button. The machine will begin its cycle.
• To Stop/Cancel: To stop the current program or cancel a selection, press the СПРИ бутон.

Поддръжка

Правилната поддръжка гарантира дълготрайността и оптималната работа на вашата хлебопекарна.

• Почистване на тавата за хляб и лопатката за месене: After each use, remove the bread pan and kneading paddle. Fill the pan with warm water and let it soak for 10-15 minutes to loosen any stuck-on dough. Wash with a soft sponge and mild dish soap. Rinse thoroughly and dry completely. Do not use metal utensils or abrasive cleaners that could damage the non-stick coating.
• Почистване на екстериора: As per manufacturer instructions, wipe the exterior of the breadmaker with a dry cloth. For stubborn stains, a slightly damp cloth can be used, followed by drying. Ensure no water enters the ventilation openings.
• Съхранение: When not in use, ensure the breadmaker is clean and dry. Store it in a cool, dry place, away from direct sunlight and extreme temperatures.

Отстраняване на неизправности

This section addresses common issues you might encounter with your breadmaker. If the problem persists, please contact customer support.

• Хлябът не се надига:
  • Check yeast expiration date.
  • Ensure water temperature is correct (not too hot or cold).
  • Verify ingredient measurements are accurate.
• Машината не стартира:
  • Уверете се, че захранващият кабел е здраво включен в работещ контакт.
  • Check if the lid is properly closed and the bread pan is correctly seated.
• Силен шум по време на работа:
  • Ensure the breadmaker is on a stable, flat surface.
  • Check if the bread pan is securely locked into place.

Спецификации

Гаранция и поддръжка

For specific warranty information regarding your Breadman Breadmaker Model TR-600, please refer to the warranty card included with your purchase or contact the retailer where the product was purchased. Warranty terms and conditions may vary.

For technical support, replacement parts, or further assistance, please contact the manufacturer, A, directly through their official website or customer service channels. Keep your purchase receipt and model number handy when contacting support.

You can often find additional support resources, FAQs, and contact information by visiting the manufacturer's website or the product page on the retailer's webсайт (напр. Страница на продукта в Amazon).