better bathrooms ARIBBMPB Concealed Cistern Manconcis Push Button User Manual

To adjust water volume, move the slider on the flush valve.
If needed, remove the flush valve to check or clean the washer following the provided steps.

Push Button Operation Failure:
If the push button does not bounce back after flushing, it may need replacement.

Cleaning:
Wipe the push button surface with a clean damp cloth. Avoid using abrasive cleaning agents. Rinse immediately if harsh chemicals come in contact.

Multi-person assembly
Tools required

We always recommend using professional tradespeople to install your product

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers

We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings, and furniture to match. So, you can fall in love with your space every single day.
As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Award,s and being placed on The Sunday Times Fast Track 100.

We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us

Important information

Please read these instructions thoroughly and retain for future reference.

Manufactured to BS EN14055 WC and urinal cisterns.
All installation work must be carried out to comply with the Water Bylaw Regulations.

The installation should be designed to allow maintenance access.

Parts list

Accessories list

Cistern dimensions

Technical specifications

Installation steps

Installation of wall bracket.
Installation of tank.
Cutting of flush bend.
Installation of water inlet connector.
Installation with a front access panel.
Installation with a top access panel.
Installation of button.
Notice: The push button can be installed on the top and front panel of the vanity as shown picture except the square marked areas due to the space limitation.
Installation of toilet.

Trouble Shooting

For all troubleshooting solutions, please refer to the Maintenance section.

Insufficient or too much water entering the cistern tank
1. Adjust the inlet valve using the adjustment screw.
Water filling into the cistern slowly
1. If the water flows into the cistern slowly, the washer on the inlet valve could be blocked and may require cleaning.
2. Remove and run under warm water and clean using a small brush to remove any blockage, if this does not resolve the issue, check the water supply to the cistern.
3. If this is running freely, replace the inlet valve.
Tank fills correctly but insufficient water leaving the tank
1. Adjust the flush valve volume.
Water running into the pan continually after flushing
1. Establish if the water level in the cistern is reaching the overflow on the syphon, if yes, replace the inlet valve. If it doesn’t, replace the upper section of the syphon.

Maintenance

For all maintenance measures below, you will need to gain access to the cistern tank by removing panels/tops on your WC unit, (this access will differ depending on your WC unit), and for the water supply to be turned off.

Once you have gained access, remove the screws in the tank face/lid and this will release the second section of the face/lid by unclipping from the tank.

Inlet valve adjustment
Twist the adjustment screw as shown in the direction required.

Inlet valve washer cleaning

Unscrew the washer section from the inlet valve.

Place the washer under warm running water and brush to remove any blockage.
Then replace and tighten back into position.

Flush valve removal and adjustment

The flush valve is made of two parts, the bottom section which is secured to the cistern tank and the upper section which can twist and pull away from the bottom section.
During this maintenance the bottom section can remain in position

To adjust the volume of water leaving the tank, move the slider as shown.
If you need to remove the flush valve to check the washer or remove the washer for cleaning, take the flush valve out and take the washer down as the process showed below.

Push button operation failure

Take the button down as the steps below, normally press the half flush & full flush, and observe whether the button can bounce back or not. If not, please replace the button.

Cleaning

To maintain the surface of the push button surface, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials.
If any harsh chemicals come into contact with the product’s surface, rinse and wipe clean immediately.

For more information

Visit betterbathrooms.com
Email customerservices@buyitdirect.co.uk
Call 0330 390 3062

write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA

Documents / Resources

better bathrooms ARIBBMPB Concealed Cistern Manconcis Push Button [pdf] User Manual
ARIBBMPB Concealed Cistern Manconcis Push Button, ARIBBMPB, Concealed Cistern Manconcis Push Button, Manconcis Push Button, Push Button, Button

References

User Manual

better bathrooms ARIBBMPB Concealed Cistern Manconcis Push Button

Product Information

Product Usage Instructions