beta F-550 Sliding Gate Opener
Product Specifications
- Name: Sliding Gate Opener F-550
- Quantity: 1 set
- Motor Package Part List:
- Sliding gate opener F-550: 1pcs
- User manual Transmitter FR36 Base plate: 1pcs 2pcs 1pcs
- Release key: 2pcs
- M8x80 Expanding screw: 4pcs
- M8 X40 Screw with hexagon nut and plain washer: 4 sets
- Limit switch bracket with adjusting screws: 2pcs
- Rack Package Part List:
- Rack: 4pcs
- Bolt: 4pcs
- Screw and washer: 4 sets
Product Usage Instructions
- Motor Package Assembly:
- Weld the bolts (10 of P5) to the sliding gate and fix the rack to the bolts (P5).
- Drill 4 holes in the mounting surface and fix the base plate with M8X80 expanding screws.
- Open the housing of the opener and fix it to the base plate using M8X40 screws with hexagon nuts and plain washers.
- Rack Package Assembly:
- Assemble the rack by attaching the bolts and screws with washers as per the provided instructions.
FAQs
- Q: How do I program the transmitter for the sliding gate opener?
- A: To program the transmitter, refer to the user manual provided in the package for detailed instructions on transmitter setup.
- Q: What is the maximum length supported by the sliding gate opener?
- A: The maximum length supported by the sliding gate opener is 3270mm for UV08-2D, 3848mm for UV08-5D, and 4008mm for UV08-6D.
- Q: How many release keys are included in the package?
- A: The package includes 2 release keys for emergency manual operation of the sliding gate opener.
“`
Documents / Resources
 |
beta F-550 Sliding Gate Opener [pdf] Owner's Manual F-550 Sliding Gate Opener, F-550, Sliding Gate Opener, Gate Opener, Opener |