REF24FCIPIXR23 Built In Freezer Column
“
Product Information
Specifications
- Product: Super Premium Built-in Refrigerator/Freezer
Columns - Type: Built-in Refrigerator/Freezer
- Model: [Insert Model Number]
- Capacity: [Insert Capacity]
- Dimensions: [Insert Dimensions]
- Features: [Insert Key Features]
Product Usage Instructions
Step 1: Unpacking and Inspection
Unpack the refrigerator/freezer columns and inspect for any
visible damages. Contact customer support if any issues are
found.
Step 2: Placement
Place the refrigerator/freezer columns in the desired location
with proper ventilation and clearance as per the manufacturer’s
recommendations.
Step 3: Leveling
Use a level to ensure the refrigerator is properly leveled to
prevent operational issues and ensure proper door alignment.
Step 4: Installation Depth
Install the product at the correct depth within the cabinet
niche to ensure the door makes an effective seal and opens
properly.
Step 5: Handle Installation
If applicable, follow the provided instructions to install the
handles securely.
Step 6: Power Connection
Connect the refrigerator/freezer columns to a power source
following the electrical requirements mentioned in the user
manual.
Step 7: Initial Setup
Set the desired temperatures for the refrigerator and freezer
compartments according to your preferences.
Step 8: Ice Production
If your model includes an ice maker, follow the instructions to
enable ice production.
FAQ
Q: How do I clean the refrigerator/freezer columns?
A: To clean the interior, use a mild detergent and warm water.
For the exterior, wipe with a soft cloth and mild detergent. Avoid
using abrasive cleaners.
Q: Can I adjust the temperature settings?
A: Yes, you can typically adjust the temperature settings for
both the refrigerator and freezer compartments. Refer to the user
manual for specific instructions.
“`
QUICK INSTALLATION GUIDE
Super Premium Built-in Refrigerator/Freezer Columns
STEP 1
Allow Refrigerator to Rest Before Use · Wait 24 hours before turning on the refrigerator. · This ensures the compressor oil settles
properly, especially if the unit was transported lying down or at an angle. · Important: Skipping this step may damage the compressor and affect cooling performance.
STEP 2
Install the Anti-Tilt Bracket (see installation manual: pages 6, 7 and 23) · Mount the anti-tilt bracket securely to prevent
the refrigerator from tipping.
STEP 3
Leveling and Door Alignment (see installation manual: page 9) · Ensure all leveling feet are properly adjusted to
stabilize the refrigerator. · Accurate leveling is critical for preventing
operational issues and ensuring proper door alignment.
STEP 4
Align the Custom Panel (see installation manual: pages 11 to 17) · Custom panel weight can affect door sealing. · Use the adjustment points provided to align the
panel and ensure a proper seal. If the product is installed to the incorrect depth within the cabinet niche, the door will not make an effective seal or may not open properly.
Franc¸ais
Español
STEP 5
Handle Installation (If Applicable)
· Install the handle kit, making sure to apply the provided Loctite thread locker during installation to prevent loosening over time.
· Refer to the handle installation instructions included in the kit: For Stainless Steel Panels: Follow the specific guidelines. For Wood Panels: Use threaded inserts for wood. For multiple installations, ensure correct handle alignment.
STEP 6
Inspect Water Line Connections (see installation manual: pages 8, 9 and 25) · After connecting the water line, inspect all
connectors and hoses for leaks. · Perform this step before sliding the
refrigerator into its niche or securing it to adjacent cabinetry. · Important: Fix leaks immediately to avoid damage to floors or cabinets.
STEP 7
Activate the Ice Maker (If Applicable) (see installation manual: page 25) · After installation, turn on the ice maker to
enable ice production.
STEP 8
Install the Water Filter (If Applicable) (see installation manual: page 25; see user manual: pages 27, 28) · Before turning on the automatic ice maker,
ensure that the water filter cartridge is installed. Replace the filter regularly as indicated in the user manual. · If the water supply is already filtered through a centralized system, the cooling unit can be set in water filter bypass mode by removing the filter cartridge.
Documents / Resources
 |
BERTAZZONI REF24FCIPIXR23 Built In Freezer Column [pdf] Installation Guide REF24FCIPIXR23, REF18FCIPIXL23, REF24FCIPIXR23 Built In Freezer Column, REF24FCIPIXR23, Built In Freezer Column, In Freezer Column, Freezer Column |