bernette 57 Compact Sewing Machine Installation Guide

bernette-LOGO

Bernette 57 Compact Sewing Machine

bernette-57-Compact-Sewing-Machine-PRODUCT

IMPORTANT SAFETY INSTRUCTIONS

  • Please be aware of the following basic safety instructions when using your machine. Before using this machine, read the instruction manual carefully.

DANGER

  • To protect against electric shock, the following instructions must be observed:
  • Never leave the machine unattended when it is connected to the power supply. Immediately after use and before cleaning, switch off the machine and disconnect the power cable from the outlet. In order to protect against injury, the following instructions must be adhered to:
  • Do not look directly into the LED lamp with optical instruments (e.g., a magnifying glass). If the LED lamp is damaged or defective, have the LED lamp checked or repaired at your local Bernette dealer.
  • Switch off the machine before working in the needle area.
  • Before starting the machine, close all covers.

WARNING
To reduce the risk of burns, fire, electric shock or personal injury, the following instructions must be observed.

General Facts

  • This machine may only be used for the purpose described in this instruction manual.

Working Environment

  • Do not use the machine outdoors.
  • Only use the machine in dry rooms.
  • Do not use the machine in a humid area.
  • Do not use the machine in rooms where aerosol products (sprays) are being used.
  • Do not use the machine in rooms where oxygen is dispensed.

Technical Condition

  • Never use the machine when it is damp.
  • Do not use the machine if it is not working properly.
  • Do not use the machine if a cable or the plug is damaged.
  • Do not use the machine if it has been dropped, damaged or has fallen into water.
  • If the machine is damaged or does not work properly, have the machine checked or repaired by your local bernette dealer.
  • Keep all ventilation openings of the machine and the foot control free of lint, dust and loose cloth.
  • Do not use the machine if the ventilation openings are blocked.

Accessories and Supplies

  • Only use the accessories recommended by the manufacturer.
  • Always use an original Bernette Stitch Plate. An incorrect stitch plate can result in needle breakage.
  • Always use plastic bobbins of class 15. If other bobbins are used, proper functioning of the machine cannot be guaranteed.
  • Use only straight needles of good quality. Bent or damaged needles can cause needle breakage.
  • The machine is double-insulated. Only use original spare parts. See instructions for servicing of double-insulated products.
  • To lubricate the machine, only use oil recommended by Bernette.

Appropriate Use

  • The machine can be used by children aged 8 years and over or by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised or have been given instructions on how to use the machine safely and understand the hazards involved. Children are not allowed to play with the machine. Cleaning and maintenance work may only be carried out by children under supervision.
  • Only use the machine with the supplied power cable. USA and Canada only: Do not connect power plug NEMA 1-15 to circuits exceeding 150 volt-toground. If the machine is to be used in a country other than the country of origin, obtain a power cable suitable for this country from a bernette dealer.
  • Only use this machine with the supplied foot control of type C-8001.
  • Do not insert any objects into the openings of the machine.
  • Do not place any objects on the foot control.
  • While sewing, guide the fabric gently. Pulling and pushing the fabric can cause needle breakage.
  • Keep fingers away from all moving parts. Special care is required in the needle area.
  • Only lift the machine by the handle.
  • For activities in the needle area – such as threading the needle, changing the needle, threading the looper or changing the presser foot – switch off the machine. To switch off, set the power switch to «0».
  • When protective covers are removed, when the machine is oiled or when other cleaning and maintenance operations mentioned in this instruction manual are carried out, switch off the machine and disconnect the power plug from the outlet.
  • Pull the plug out of the outlet by pulling on the plug. Do not pull on the cable.

SAVE THESE INSTRUCTIONS

General Information

Availability of the Instruction Manual
The short manual is part of the machine.
bernette-57-Compact-Sewing-Machine-FIG (1)The latest version of the detailed instruction manual for the Bernette 57 is available at  https://www.bernette.com/support. Keep the short manual of the machine in a suitable place near the machine and have it ready for reference. When passing on the machine to a third party, enclose the short manual of the machine.
Proper Use
Your Bernette machine is conceived and designed for private household use. It is intended for sewing fabrics and other materials as described in this instruction manual. Any other use is not considered proper. BERNINA assumes no liability for consequences resulting from improper use.
Equipment and Scope of Delivery
Example images are used in these instructions for the purposes of illustration. The machines and the accessories shown in the images, therefore, do not always match the actual items included with your machine. The supplied accessory can vary depending on the country of delivery. Accessories mentioned or shown, which are not included in the scope of delivery, can be purchased as optional accessories from a Bernette dealer. Further accessories can be found at bernette.com/ b57. For technical reasons and in order to improve the product, changes may be made to the equipment of the machine and the scope of delivery at any time and without prior notice.
Servicing of Double-insulated Products
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system and should only be done by qualified service personnel. Replacement parts for a double-insulated product must be identical to the original parts in the product. A double-insulated product is marked with the words: Double-Insulation or double-insulated.
bernette-57-Compact-Sewing-Machine-FIG (2)The symbol may also be marked on the product.

Environmental Protection BERNINA International AG is committed to environmental protection. We strive to minimize the environmental impact of our products by continuously improving product design and our manufacturing technology.
bernette-57-Compact-Sewing-Machine-FIG (3)The machine is labeled with the symbol of the crossed-out wastebin. This means that the machine should not be disposed of in household waste when it is no longer needed. Improper disposal can result in dangerous substances getting into the groundwater and thus into our food chain, damaging our health. The machine must be returned free of charge to a nearby collection point for electrical waste and electronic equipment or to a collection point for the reuse of the machine. Information on collection points can be obtained from your local administration. When purchasing a new machine, the dealer is obliged to take back the old machine free of charge and dispose of it properly. If the machine contains personal data, you are responsible for deleting the data yourself before returning the machine.

Introduction

1 Machine

Front

bernette-57-Compact-Sewing-Machine-FIG (4)

1 Feed Dog Up/Down 2 Needle Area 3 Lighting 4 Thread Cutter 5 Thread Take-up Lever 6 Connection for Slide-on Table 7 Connection for Sewing Table

Needle Area

bernette-57-Compact-Sewing-Machine-FIG (5)

  1. Bobbin Cover
  2. Stitch Plate
  3. Feed Dog
  4. Presser Foot
  5. Needle
  6. Buttonhole Lever
  7. Needle Holder
  8. Needle Threader
  9. Stitch Plate Release Button

Sewing table and accessory box

bernette-57-Compact-Sewing-Machine-FIG (6)

  1. Sewing Table
  2. Accessories Box
  3. Accessories Box Cover

Back

bernette-57-Compact-Sewing-Machine-FIG (7)

1 Connection for Foot Control 2 Power Cable Connection 3 Power Switch 4 USB Port 5 Holder for Touchscreen Pen 6 Handwheel 7 Carry Handle 8 Presser Foot Lifter 9 Sewing table and accessory box

Top View

bernette-57-Compact-Sewing-Machine-FIG (8)

1 Thread Guide, Winder 2 Rotary Dial for Presser Foot Pressure 3 Thread Guide, Rear 4 Thread Guide Eyelet 5 Smartphone Holder 6 Spool Pin, Horizontal 7 Carry Handle 8 Thread Cutter 9 Mount for Vertical Spool Pin 10 Bobbin Winding Unit

Controls

bernette-57-Compact-Sewing-Machine-FIG (9)

1 Function Buttons above the Needle 2 Needle Threader Lever 3 Left Controls 4 Display 5 Right Controls

Function Buttons above the Needle

bernette-57-Compact-Sewing-Machine-FIG (10)

  1. Start/Stop
  2. Thread Cutter
  3. Quick Reverse

Left Controls
bernette-57-Compact-Sewing-Machine-FIG (11)

  1. Needle Position Up/ Down
  2. Securing/Pattern End
  3. Speed Control

Right Controls
bernette-57-Compact-Sewing-Machine-FIG (12)

  1. Settings
  2. Stitch Width
  3. Lock
  4. Stitch Length
  5. Reset
  6. Needle Position Left/Right

2 Screen

Sewing Screen

bernette-57-Compact-Sewing-Machine-FIG (13)

  1. Stitch Plate and Sewing Needle
  2. Presser Foot
  3. Upper Thread Tension
  4. Needle Stop
  5. Stitch Length
  6. Stitch Width
  7. Needle Position
  8. Stitch Preview
  9. Quick Access Bar

Quick Access Bar

bernette-57-Compact-Sewing-Machine-FIG (14)

  1. Selection Area
  2. Edit
  3. Personal Folder
  4. Combi Mode

Setting Up the Machine

3 Preparing the Machine

Connecting the Machine and Foot Control

bernette-57-Compact-Sewing-Machine-FIG (15)

Changing the Presser Foot

bernette-57-Compact-Sewing-Machine-FIG (16)

Changing the Needle

bernette-57-Compact-Sewing-Machine-FIG (17)

Winding the Bobbin Thread and Threading

bernette-57-Compact-Sewing-Machine-FIG (18)

bernette-57-Compact-Sewing-Machine-FIG (19)

bernette-57-Compact-Sewing-Machine-FIG (20)

Threading the Upper Thread
bernette-57-Compact-Sewing-Machine-FIG (21)

bernette-57-Compact-Sewing-Machine-FIG (22)

Attaching/Removing Slide-On Table

bernette-57-Compact-Sewing-Machine-FIG (23)

Maintenance

4 Maintenance

Oiling the Needle Bar

bernette-57-Compact-Sewing-Machine-FIG (24)

Cleaning the Feed Dog and the Hook
bernette-57-Compact-Sewing-Machine-FIG (25)

Troubleshooting

bernette-57-Compact-Sewing-Machine-FIG (26) bernette-57-Compact-Sewing-Machine-FIG (27) bernette-57-Compact-Sewing-Machine-FIG (28) bernette-57-Compact-Sewing-Machine-FIG (29) bernette-57-Compact-Sewing-Machine-FIG (30) bernette-57-Compact-Sewing-Machine-FIG (31) bernette-57-Compact-Sewing-Machine-FIG (32)

bernette-57-Compact-Sewing-Machine-FIG (33)

www.bernette.com/b57

bernette-57-Compact-Sewing-Machine-FIG (34)

Scan QR code to download the free sewing tutorial

bernette-57-Compact-Sewing-Machine-FIG (35)

5200057.0.04 | 2026-06 EN O BERNINA International AG Steckborn CH, www.bernina.com

Documents / Resources

PDF thumbnail57 Compact Sewing Machine
Installation Guide · 5200057_00A_04, 57 Compact Sewing Machine, 57, Compact Sewing Machine, Sewing Machine, Machine

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.