B10-SLC
Gravity Feed Slicer
Model B10-SLC
B10-SLC – Gravity Feed Slicers
SPECIFIER STATEMENT
Berkel Model B10-SLC manual gravity feed slicer features Berkel’s hollow ground chromium-plated, carbon steel knife and built-in sharpener. The permanent, tapered guard covers the non-slicing portion of the knife, even when the center plate is removed. The 30° table makes product feed easier, creating more consistent and uniform slices with less waste. The 1 ⁄4 HP motor, 10″ knife and large product table are ideal for handling oversize meats, cheeses and a variety of other products. The B10-SLC is easy to clean and disassemble quickly without tools. The compact space-saving design is ideal for limited kitchen counter space. Complies with NSF/ANSI Standard #8.
Project _________________________________________________________________________
AIA # __________________________________ SIS # __________________________________
Item # _________________________________ Quantity ___________ C.S.I. Section 114000
PERFORMANCE FEATURES
- 1-speed, 1 ⁄4 HP, totally enclosed and permanently lubricated knife motor
- Precise slice adjustment to a thickness of 9 ⁄16″ (14 mm)
- Carriage handles food up to 8 1 ⁄4″ (210 mm) wide, by 6 7 ⁄8″ (175 mm) high or 6 7 ⁄8″ (175 mm) diameter
- Furnished in 115/60/1, 2.5 amps, AC, ETL listed
EASY TO OPERATE FEATURES
- 30° product table with a removable meat pusher
- Top-mounted, two-stone knife sharpener produces a consistently sharp knife edge
- Attached 6-foot, flexible, 3-wire cord, and plug for the grounded receptacle (5-15P)
EASY-TO-CLEAN FEATURES
- Removable carriage arm
- A permanent, tapered knife ring guard covers a non-slicing portion of the knife even when the center plate is removed; ring guard design provides more room behind the knife for easy cleaning
- The finish is stainless steel and sanitary anodized aluminum; unit disassembles quickly without tools for easy cleaning
- Nominal 10″ (250 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife
- Positive, moisture protected, on/off switch with power light indicator
SPECIFICATIONS
Motor: 1-speed, 1 ⁄4 HP, totally enclosed, permanently lubricated ball bearings, thermally protected.
Electrical: Furnished in 115/60/1, 2.5 amps, AC, ETL listed.
Finish/Construction: All food contact areas are stainless steel or anodized aluminum including the pusher, gauge plate, product table, center plate, knife ring guard and a one-piece base. The slicer disassembles quickly without tools for easy cleaning.
Knife: Nominal 10″ (250 mm) diameter, hollow ground, hardened and polished forged chromium-plated carbon steel, rotates at 290 rpm. Cutting Capacity: Carriage handles food up to 8 1 ⁄4″ (210 mm) wide by 6 7 ⁄8″ (175 mm) high or 6 7 ⁄8″ (175 mm) diameter.
Slice Thickness: The precision system provides infinite slice adjustment and consistent cuts of hard or soft foods from tissue thin to 9 ⁄16″ (14 mm).
Full Gravity Feed: Full 30° angle feed requires less mechanical pressure. Equipped with a removable anodized aluminum pusher to hold product and minimize waste.
Knife Sharpener: Top mounted, two-stone system for a lasting, razor-sharp edge.
Knife Ring Guard: Permanent, tapered guard covers a non-slicing portion of the knife edge even when the center plate is removed.
The ring guard is designed to provide added room behind the knife for easy cleaning. On/Off Switch: Highly reliable, moisture resistant, on/off switch with power light indicator. Cord and Plug: Attached 6-foot, flexible, 3-wire cord, and plug for the grounded receptacle (5-15P).
Warranty: All parts, service, and travel coverage for one year, excluding wear items.
| MODEL NUMBER |
CUTTING CAPACITY | SLICE THICKNESS |
KNIFE DIAMETER |
PRODUCT DIMENSIONS | ||
| B10-SLC | 8 1 ⁄4″ (210 mm) wide 6 7 ⁄8″ (175 mm) high 6 7 ⁄8″ (175 mm) diameter |
to 9 ⁄16″ (14 mm) |
10″ (250 mm) |
WIDTH |
DEPTH |
HEIGHT |
| 16″ (407 mm) | 20″ (510 mm) | 13″ (330 mm) | ||||
| MODEL NUMBER |
MOTOR |
ELECTRICAL | WEIGHT | BOX DIMENSIONS | ||
| B10-SLC | 1-speed 1 ⁄4 HP | 115/60/1 2.5 amps | Net 33 lbs. (15 kg) Ship 40 lbs. (18 kg) |
WIDTH |
DEPTH |
HEIGHT |
| 22″ (560 mm) |
24″ (610 mm) |
18″ (458 mm) |
||||
Approved by………………. Date…………….. Approved by………… Date ……….
As continued product improvement is a policy of Berkel, specifications are subject to change without notice.
BK45783 (06-21) Berkel
• 2006 Northwestern Pkwy, Louisville, KY 40203
• Phone: 800-814-2028
• Fax: 800-444-0602
• www.berkelequipment.com Printed in the U.S.A.
Documents / Resources
 |
Berkel B10-SLC Gravity Feed Slicer [pdf] User Guide B10-SLC Gravity Feed Slicer, B10-SLC, Gravity Feed Slicer, Feed Slicer, Gravity Slicer, Slicer |
