BEOK TR9B-WiFi Ultra-Large Colorful Screen Capacitive Touch LCD Smart Thermostat

Product Overview

This series of thermostats has Floor Heating, Fan Coil, and Integrated version, meeting the requirements under different scenarios.

Version	System mode	Model	Application
Floor heating	Heating	EP	Built-in & floor sensor, floor limit sensor + Weekly programming
		WP	A NC/NO dual-output + Weekly programming
		WPB	A NC/NO dual-output + Weekly programming+ Potential-free output
Fan Coil	Heating /Cooling / Ventilation	AC2	Timer task + 2-pipe system
		AC2-485	Timer task + 2-pipe system + 485Modbus (optional)
		AC4	Timer task + 4-pipe system + 485Modbus (optional)
Integrated	Heating / Cooling / Ventilation/Floor heating / Floor heating + Heating	AWY	Floor heating & fan coil, weekly programming + Potential-free output + Timer task + 485Modbus (optional) + Door card (optional)

Display Symbols

Temperature Control Mode(Floor Heating/Integrated)

Auto Mode
In the weekly-circled program, up to 6 heating events can be set per day. Heating events, workdays, and temperature can be separately customized based on personal routines.

Manual Mode
The thermostat works based on manually-set temperature, disconnecting from auto mode.

Temporary Mode
The thermostat works based on manually-set temperature temporarily and then shifts back to auto mode till the next event.

• Customized exclusive temperature plan – up to 6 events allowed to set per day
• Sail-shape curved design – fashion, elegant and enduring
• UItra-large screen -better user interaction experience
•  485 Modbus and room card linkage – customized equipment (optional)

Parameter:

• Supply voltage: AC100-240V;50-60Hz
• Power consumption: 1W Max (Wi-Fi 3W Max)
• Temp. setting range: S-95’C (41-99’F)
• Floor limited range: 20-so·c csa-ss·F)
• Temp. Dif. 0.5-1D’C (1-10″F) , Factory setting ±1″C
• Ambient temperature: ~-so·c (23-122’F)
• Protection level: IP20
• Shell material: Anti-Flammable PC

User Operation

• Power on/off:
  Press “shortly to turn on/off the thermostat.
• Auto-mode:
  Press for 3 seconds to edit auto-mode settings. (Floor Heating/Integrated)
• Timer task:
  Press for 3 seconds to edit the timer task. (Fan Coil/Integrated)
• Time setting:
  Press for 3 seconds to set time. (Floor Heating)
  Press twice for 3 seconds to set time. (Automatic time synch for Wi-Fi version)
• Temp setting:
  Press or “ shortly to change setting temperature by 0.5°C.
• Child-lock:
  Press ” + for 3 seconds to activate child-lock.
• System mode:
  Press M shortly to switch cooling/heating/ventilation. (Fan Coil)
  Press “M ” shortly to switch cooling/heating/ventilation/floor heating/floor heating + heating. (Integrated)
• Temp control mode:  Press “M ” shortly to switch manual/auto mode. (Floor heating)
  Press shortly to switch manual/auto mode. (Integrated, floor heating
• Fan speed setting:  Press “ ” shortly to adjust fan speed.(Fan Cail/Integrated)
• ECO mode: Press ”shortly to set to ECO mode 18°C(64°F). (Floor heating)
• Advanced Setting (Usually for Professional Technicians)
  Under power-off, press “ ” for 3 seconds to enter advanced setting mode, then re-press
  “ M” to switch to next mode. Press “ ” to save and exit advanced setting mode.

Code	Meaning	“      ”or“      ”	Default Value	Integrated	Fan Coil		Floor Heating
					AC2-485 AC4	AC2
00	Postal address	Adjustment range 0x00~0xFA	00	√	√	×	√
01		-9.9~9.9℃(-9~9℉)	-3℃	√	√	√	√
02	Dead zone	0.5~10℃(1~10℉)	±1℃	√	√	√	√
03		5~95℃(41~99℉)	50℃	√	√	√	√
04		5~47℃(41~99℉)	5℃	√	√	√	√
05	Frost protection	ON: frost protection on OFF: frost protection off	OFF	√	√	√	√
06		℃/℉	℃	√	√	√	√
07	Sensor selection		IN	√	×	×	√
08	Floor limited temp.	20~90℃(68~99℉)	35℃	√	×	×	√
09	Weekly programming setting	12345: 5/2 week mode 123456: 6/1 week mode 1234567: 7/0 week mode	12345	√	×	×	√
10	Status of potential -free and main power outputs	00: both outputs are normally open 01: main power output is normally closed; potential-free output is normally open 02: both outputs are normally closed 03: both outputs are normally closed; under power-off, frost protection is off either	00	√	×	×	√
11	Delay time of outputs	0~5min	0	√	×	×	√
12	Child-lock	00: Child-lock inactivate when screen off; lock all when child-lock activate 01: Child-lock activate when screen off; lock all when child-lock activate 02: Child-lock activate when screen off; lock all except Fan Speed, Up and Down when child-lock activate 03: Child-lock activate when screen off; lock all except Power on/off when child-lock activate	00	√	√	√	√
13	Power-on-reset	00: stay power-off after Power-on-reset 01: stay power-on after Power-on-reset 02: recovery after Power-on-reset	02	√	√	√	√
14	Door card status	00: turn off door card function 01: set to ECO temp. after pulling door card out 02: stay power-off after pulling door card out	00	√	√	×	×
15	Door card heating ECO temp.	10~21℃(50-69℉)	18℃	√	√	×	×
16	Door card cooling ECO temp.	22~32℃(72-89℉)	26℃	√	√	×	×
17	Fan coil mode setting	00: Cooling and heating 01: Cooling only	00	√	√	√	×
18	Weekly programming for Integrated	00: turn on 01: turn off	01	√	×	×	×
19	Reset	Press “ ”for 3 seconds to reset	/	√	√	√	√

Auto-mode Setting (Floor Heating / Integrated)
Press “M ” for 3 seconds to edit auto-mode setting.

Timer Task Setting (Fan Coil / Integrated )
Press “ ” for 3 seconds to enter timer task setting; press “ M ” to change settings;
Press “ ” or “ ” to adjust parameters; press “ ” to save and exit.

 

Dimensions (Unit: mm)

Mounting Steps
The thermostat adopts the pre-guide and limited snap-fit design. It is easy to mount. 1）Release the front cover by inserting a head screw-driver into the bottom crack.

Insert the wires and then fix these wires with screws. The suggested wire-stripping length is 7-9mm.

Mount backing plate into wall-cassette, put screws and then fix thermostat. Make sure that the thermostat is fixed without deformation. Suggested torque is 0.2~0.4N.m (2.0~4. 1kgf.cm).

Re-mount the front cover via snap-fit connection.

Sensor failure

Connecting Diagram
The thermostat operates in full capacity in areas with the altitude of less than 2500 above sea level. Power rating of external load should be less than or equal to 80% rated power of the thermostat in areas with altitude of 2500m to 4200m.

 

Documents / Resources

BEOK TR9B-WiFi Ultra-Large Colorful Screen Capacitive Touch LCD Smart Thermostat [pdf] Instruction Manual TR9B-WiFi, Ultra-Large Colorful Screen Capacitive Touch LCD Smart Thermostat, TR9B-WiFi Ultra-Large Colorful Screen Capacitive Touch LCD Smart Thermostat

References

• User Manual