TOL47 Series Thermostat
“
Product Information
Specifications:
- Model: TOL47 Series Thermostat
- Usage: Water heating, electric heating, or gas
boiler - Electrical Specifications:
- WP: Water heating 3A
- EP: Electric heating 16A
- WPB: Linkage; M: Gas boiler 3A
Product Packaging:
- Thermostat host Manual: 1PC
- External Sensor Cable (only EP model): 1PC
- Screw: 2PCS
- Qualification certificate: 1PC
Product Usage Instructions
Installation:
- Read the manual carefully for detailed installation
instructions. - For proper installation, it is recommended to seek help from a
professional. - Ensure the product is installed within the legal scope.
Usage:
- Follow the manual instructions for setting up the thermostat
for your specific heating system (water, electric, or gas). - Connect the external sensor cable if required for your
model. - Use the screws provided to secure the thermostat in place.
- Ensure the qualification certificate is kept for
reference.
FAQ
Q: Can this thermostat be used for both water and electric
heating systems?
A: Yes, this thermostat is suitable for water heating, electric
heating, and gas boiler systems based on the model
specifications.
Q: Is professional installation necessary for this
product?
A: It is recommended to seek help from a professional for the
installation of this thermostat to ensure correct setup and
safety.
“`
TOL47 Series Thermostat User Guide
This thermostat is used for water heating,electric heating,or gas boiler.
Welcome
Thank you for your trust and support!
We have adopted advanced technology and perfect craftsmanship so that your new thermostat will provide you with a sutable temperature environment every day in the future.
For detailed instructions on installing and using this thermostat, please read this manual carefully. Please get in touch with a professional to install the thermostat for you.
Besides, please install and use this product within the scope of the law.
Product Packaging
Thermostat host Manual
1PC 1PC
External Sensor Cable (only EP model) 1PC
Screw
2PCS
Qualification certificate 1PC
Product Parameters
WP :Water heating 3A
EP: Electric heating 16A
WPB:Linkage; M:Gas boiler 3A
Electrical Specifications
1.Temperature Sensor :NTC 2.Temperature hysteresis:±1 (default) (Adjustable ±0.5~±9.9°C) 3.Display screen: LCD 4.Working environment:-5-50°C (default) 5.Display range: 0-51°C (default) 6.Temperatures Setting:5-60°C (default) 7 . Vo l t a g e : A C 1 0 0 – 2 4 0 V, 5 0 / 6 0 H z 8.Load current:water heater 3A; electric heater 16A;gas boiler 3A; 9.Self-consumption power:<1W
Wiring Diagram
WP:water heating (External sensors cannot be connected)
NTC
EP:for electric heating;
WPB for gas boiler (for boilers connected via dry contact)
Installation Procedure
1.Connect the power box according to the wiring diagram.
2.Separate the power supply from the control board cable.
3.Screw the power supply into the box of 86.
4.Connect the power board to the control board line, and align the
buckle at 30 degrees to complete
the installation.
Adaptable mounting box: 86x86mm square mounting box
60mm European round box
Description of display & Icon
Operating Instruction
1.Power on/off: press to turn on/off the thermostat . 2.Press the M key to switch between Manual and Auto mode
3.In the Auto mode,press and key to adjust the setting temperature.It will enter temporary auto mode and will resume auto mode at the next programming session.
4.Press the key to enter the clock setting, press the mode key M to switch the setting options, and press the and key to adjust each parameter value.Note: The time of the WIFI model will automatically obtain the Internet time.
5.Simultaneously press and hold the and keys for 5 seconds to add or cancel the childlock.
6.WIFl link:When the thermostat is turned on, press and hold the button for 5 to 8 seconds,the WIFI icon flashes on the thermostat display,and the thermost enters the code matching state.
Weekly Programming Guide
Long press the M key to enter the programming setting,short press the M key to switch options, press the or key to adjust the parameters of each option,and press the key to exit and save setting.
Advanced Option Setting
When Power Off, press the M key and the key for 5 seconds to enter the advanced setting.Press the M key to enter the next option,then press the and key to adjust
Then press the key to exit the advanced option setting.
01
temperature
The default value of the calibration room temperature is-1.5 Press the or key
calibration to adjust it within the range from 9.9to-9.9
The temperature sensor selection
defaults to IN. Press the key or the key to
adjust it
Sensor
IN:Use the internal sensor
02
selection
OUT:Use the external sensor
ALL: Use both internal and external sensors.
Please note: If no external sensor is conne-
cted,do not set it to ALL or OUT,otherwise
Er will appear on the screen.
03
Measured temperature
The limit temperature value is 60 by default Press the or key to adjust it within the
extreme value Modification
range from 35 to 60
04
Temperature hysteresis
The default setting temperature hysteresis is 1; press the or key to adjust it withinthe range from0.5 to 10.
05
Antifreeze function
Set the antifreeze function as OFF by default press the key to turn on the antifreeze function
Holiday option 5: Saturday,Sunday as rest day
and turn off 6:Sunday as rest day
06
weekly
7:No rest day
programming OFF:Turn off the programming
Set the main and auxiliary reverse to 00 by
Main and auxili defaul.Press the key or key to adjust
07 reverse selection
00 main reversal 01 to indicate the auxiliary reverse. Note:Adjustments are not recommended for
non-professionals
08
Backlight brightness
00:turn off the backlight 01:low brightness 02:medium brightness 03:high brightness (only WiFi model)
09
Set temperature upper limit
Set the upper limit of the temperature to 60 press the key or key to adjust it within the range from 15 to 95
Set to restore factory setting.The default
10
Reset
display is-,press the key to display “—”
and press the key to restore the factory
setting
WIFI Connection
Preparation before Wi-Fi connection
APP download and account registration:
1. Download APP Search for “Tuya Smart” in App market or scan below QR Code to download.
2.Register Account
If you don’t have an APP account yet, you can choose to register or log in via SMS verification code. Click “Create a new account”,you will enter the Privacy page of Tuya Smart Platform.
After you click Agree, you will formally join the registration page of your mobile phone number.
The system automatically determines the current country/ region.You can also select the country/region manually. After entering your mobile phone number or email address click “get verification code” Enter the received verification code then enter the password and click”finish” to register successfully
WIFI connection 1.Turn on your mobile phone`s Bluetooth and wifi (please make sure your mobile phone connec t to 2.4Ghz Wi-Fi). 2.Activate the thermostat WiFi module:When the thermostat is turned on,press and hold the button for 5 seconds,the WIFI icon flashes on the thermostat display,and the thermostat enters the code matching state 3.Add Device There are 3 ways to add a device Method 1. Enter the Tuya APP. The main page automatically pops up
“Device to be added” (as picture 1) and click “Add”.
picture 1
Method 2: Enter the Tuya APP,Click “Add Device” or “+” (as picture 2) on the upper right corner of the APP homepage,and enter the “Add Device” interface.It will prompt: find the deviceto be added (as picture 3) and follow the prompts.
picture 2
picture 3
Method 3:Enter the Tuya APP,Click”+”on the upper right corner of the APP homepage,Find the temperature control product (Bluetooth + WIFI model)in the (small household appliance).(as picture 4) As picture 5 ignore the content of the page and tap Next. As picture 6 Ignore the content of the page and click Next As picture 7 tickconfirm the indicator is blimking click Next
picture 4
picture 5
picture 6
picture 7
4.Enter Wi-Fi information Enter the name and password of the 2.4Ghz Wi-Fi (please make sure that the Wi-Fi name and password contain only numbers and letters and not special symbols) Follow the prompts to the next step,you can see the device is being added,and after a few seconds,you will see that the device is added successfully (the length of time will depend on the strength of the wifi signal).
5.Display of temperature controller APP interface
If you encounter any problems during the use of the product, please feel free to contact us through the purchase platform, we will try our best to help you.
Documents / Resources
 |
BEOK BOT TOL47 Series Thermostat [pdf] User Guide TOL47 Series Thermostat, TOL47 Series, Thermostat |
