BENLEMI PLOTTY Side Shield With Front Side Panel Installation Guide

PLOTTY

Intended to be used indoors.
Maximum bearing capacity: 120 kg
For the bed, use mattress with maximum height of 16 cm.
Material: spruce wood
MADE IN THE CZECH REPUBLIC

Assembly and Installation Instructions

IMPORTANT; KEEP THE INSTRUCTIONS FOR LATER USE: READ CAREFULLY

• ATTENTION: „The product must be assembled by an adult. When opening the package, be careful – it contains small parts that might be harmful for children under three years old while being dismantled.”
• ATTENTION: In case of a broken or missing construction part, do not use the bed. Use only spare parts approved by the manufacturer
• ATTENTION: Keep it away from open fire and other sources of strong heat, such as electric heating, gas fire etc.
• Always follow manufacturers’ instructions included with products.
• The room must be well air circulated so that the bed was protected from moisture and mildew – either in the bed, or around it.
• For the bed, use mattress with maximum height of 16 cm
• Carefully read assembly and installation instructions and keep them for later use.
• All modifications made by the user need to comply with producer’s instructions.
• Plastic bags and other packaging material keep out of reach of children.

Maximum bearing capacity: 120 kg

Mamtenance

• Before first use, check edge sharpness and proper tightening of bolts.
• Conduct regular checks as the bolts might become loose. In case of avoiding these checks, the is a risk of injury.
• Modifications of any component have to comply with producer’s instructions.
• To clean, wipe with a small damp cloth and blot dry.

Sadová 121/4, Opava, 746 01
+420 739 787 164
family@benlemi.eu
www.benlemi.eu