BELL plus HOWELL 6051FEK LED Multi Power Station
INTRODUCTION
B+H Multi Power Station is a plug-in charging station, featuring 3 AC outlets with 1875W, 15 amps, 125V, 2 USB —C ports and I USB port with total 5V/3.IA. This compact electronic charging station keeps everything in one place. it works smoothly with any USB-powered device such as Apple iPhone, iPad and Android smartphones, tablets, cameras, e-Readers, Bluetooth headsets, speakers and more. Great for kitchens, offices, bedrooms, garages, workshops, dorm rooms or any organization purposes.
IMPORTANT SAFEGUARDS
TO REDUCE THE RISK OF ELECTRIC SHOCK – Use only indoors.
Use only in dry locations.
- RISK OF ELECTRIC SHOCK. DO NOT plug into another relocatable power tap or an extension cord. Connect the unit’s power cord directly to a standard wall outlet.
- Keep the unit AWAY from babies and children.
- DO NOT use with wet hands or in any area with wet condition such as in bathrooms.
- DO NOT use outdoors or in other wet, damp areas, or any hazardous environments requiring failsafe performance.
- DO NOT use for medical or life support equipment.
- DO NOT use if properly grounded outlets are not available.
- DO NOT cover the unit with anything for the prevention of overheating.
- DO NOT expose the unit to direct sunlight or place it near wall heaters, space heaters, radiators, or enclosed space prone to temperature increase.
- DO NOT put the unit on a bed or couch.
- DO NOT put the unit near inflammable or explosive articles.
- DO NOT use in high ambient temperature or high heat environment. power to avoid overloading, such as refrigerators, washer & dryers, dish washers, water heaters, vacuum cleaners, air conditioners, electric heaters, hair dryers, microwaves, cookers, etc. These should be connected directly to wall outlets instead.
- DO NOT disassemble or repair the unit.
IMPORTANT
- Be sure to check the current rating of AC outlets and USB ports to avoid overloading.
- USB charging ports may not work if the total amp exceeds 3. IA; long-time over-loading beyond 3. IA above may lead to USB ports damage. If you need higher USB charging power, please use the original device adapter.
GROUNDED PLUG
This unit has a grounded 3-prong electrical plug. It must be plugged only into a properly grounded 3-prong outlet. If the plug does not fit into the outlet, contact a qualified electrician. Do not attempt to modify the plug in any way.
FOR HOUSEHOLD USE ONLY FOR INDOOR USE ONLY
PARTS AND FEATURES
- Reset Button
- 2 USB-C Charging Ports
- USB Charging Port
- RGB Light Button
- RGB Light
- 3 AC Outlets
- Cord
INSTALLATION
B+H Multi Power Station fits easily into tight spaces, it can be securely installed in various areas such as wall, workbench, under counters and desks, floor & more.
Using 3M tape:
Safe to use adhesive tape on these surfaces: glass, ceramic tile, mirror, metal, plastic. Not recommended to use on these surfaces: leather, rough wall, stone.
- Peel off backing and place it with the adhesive side down on the back of the unit. The 3M tape must fit exactly over the recessed area, see Diagram on right.
- Next, peel off the other side of the tape. Press the unit firmly onto the surface for a few seconds.
Using screws with anchors:
- Drill holes matching the pattern on the back of the unit and install plastic anchors (not included).
- Attach the B+H Multi Power Station using 2 screws (not included).
USAGE
- Plug the power cord into a properly grounded wall outlet.
FOR USB POWERED DEVICES:
Plug desired USB powered devices into the USB charging ports. It is important to ensure that the rating of all devices added does not exceed 3. IA. Depending on each smartphone, B+H Multi Power Station might be able to charge up to 2 or 3 phones, or iPad, MP3, digital camera, tablet.
Note: USB charging may not work if the total current exceeds 3. IA. If the charging process is inconsistent when charging multiple devices, please use charging adapters instead, or remove some charging devices if necessary.
FOR AC POWERED DEVICES:
Plug the electronic devices into an AC outlet. Make sure the devices total power usage does not exceed 125V/60Hz/15Amp/1875 Watts. - Press the LED Light button to turn on the White Light. Keep pressing to go through other lighting modes: Warm White Light, RGB Light and OFF.
TROUBLESHOOTING
SPECIFICATIONS
- Model Number: 6051 FEK
- AC Outlets: 3 Standard Outlets
- Electrical Rating: 125V/60Hz/15Amp/1875 W
- USB Charging Rating: 1 USB-A 5V2.4A Max.
- 1 USB-C 5V3.1A Max.
- 1 USB-A +2 USB-C 3.1A Max.
- Dimensions: 4 inches x 4 inches x 1.1 inches (10.16cm x 10.16cm x 2.79cm)
- Weight: 0.691bs (315g)
FCC STATEMENT
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
BELL+HOWELL@ MULTI POWER STATION ITEM NO. 6051 FEK DISTRIBUTED BY EMSON@ NY, NY, 10001 02025 EMSON@ ALL RIGHTS RESERVED. MADE IN VIETNAM.
Documents / Resources
 |
BELL plus HOWELL 6051FEK LED Multi Power Station [pdf] Instruction Manual 6051FEK LED Multi Power Station, 6051FEK, LED Multi Power Station, Multi Power Station, Power Station, Station |