BEITONG KunPeng 40 Interlligent Gaming Controller

Specifications:

• Model: XYZ123
• Power Supply: AC 100-240V, 50/60Hz
• Dimensions: 10 x 5 x 3 inches
• Weight: 2.5 lbs

Product Information

The XYZ123 product is a versatile device designed to enhance your daily tasks. With its compact size and powerful performance, it can be used for a variety of applications.

Product Usage Instructions

Step 1: Power On
Connect the device to a power source using the provided AC adapter. Press the power button to turn on the device.

Step 2: Setup
Follow the on-screen instructions to complete the initial setup process. This may involve selecting language, time zone, and other preferences.

Step 3: Operation
Once the setup is complete, you can start using the device for your intended tasks. Refer to the user manual for specific instructions on different functions.

FAQ:

• Q: How do I reset the device?
  A: To reset the device, locate the reset button on the back panel and press it using a small pin or paper clip.
• Q: Can I use the device without an internet connection?
  A: Yes, the device can be used for offline tasks, but some features may require an internet connection for full functionality.

Basic Control

Damping Stick Guide

Freely adjust damping by rotating the button

1. Rotate clockwise to increase damping
2. Rotate counter-clockwise to decrease damping

pc

Wireless only enables while the gamepad is NOT connected through a cable.

1. Insert the receiver into the USB port.
   A red blink indicates success.
2. Push Mode S witch on the back to
   
3. Short press HONE button to power on. If the connection is successful, the gamepad will respond with a short vibration and the light will stay red for 7 seconds.
4. After the first successful connection, the gamepad will remember the last connected device and connect automatically next time it powers on in mode by short pressing HOME button.

Wired connection

1. In any Mode, connect the PC and the gamepad with a USB cable.
2. While the gamepad is powered off, short press HOME button to power on. A short vibration indicates that the connection is successful.

Bluetooth connection

1. Push Mode Switch on the back to
2. Short press HOME button to power on.
   Then on your PC go to Settings -> Bluetooth and Devices -> Add a Bluetooth Device, then select “XBOX WIRELESS CONTROLLER” to connect.
3. If the connection is successful, the gamepad will respond with a short vibration and the light will stay yellow for 7 seconds.
4. After the first successful connection, the gamepad will remember the last connected device and connect automatically next time it powers on in mode by short pressing HOME button.

Switch

1. Start your Switch, on the HOME menu, select gamepad icon, then go to “Controllers” -> “Change Grip/Order”
2. While the gamepad is powered off, push MODE Switch on the back to NS.
3. Short press HOME button to power up the gamepad. The gamepad will connect automatically after a short time. If the connection is successful, the gamepad’s light will stay blue for 7 seconds.
4. After the first successful connection,  the gamepad will remember the last connected Switch and connect automatically next time it powers on in NS mode short pressing HOME button.

Phone/ Tablet

*This gamepad supports Xlnput and is compatible with any games that have native Xlnput support.

1. Push Mode Switch on the back to
2. Short press HOME button to power on. Open your device’s Bluetooth discovery menu and select “XBOX WIRELESS CONTROLERFROM the device list.
   
3. If the connection is successful, the gamepad will respond with a short vibration and the light will stay green for 7 seconds.
4. After the first successful connection, the gamepad will remember the last connected device and connect automatically next time it powers on in mode by short pressing HOME button.

Andriod TV/Android Mapper

1. Push Mode Switch on the back to APP
2. Short press HOME button to power on. Open your device’s Bluetooth discovery menu and select “BT P-KP40A BFM’ from the device list.
3. If the connection is successful, the gamepad will respond with a short vibration and the light will stay green for 7 seconds.
4. After the first successful connection, the gamepad will remember the last connected device and connect automatically next time it powers on in APP mode by short pressing HOME button.

WIRELESS/ BLUETOOTH MODE SWITCH

This gamepad can switch among 4 wieless modes: Receiver, XInput Bluetooth, Switch Bluetooth, and BFM Bluetooth. You may force pairing in current mode by long pressing HOME button for 5 seconds. The gamepad will attempt reconnecting to its previous connected device on each mode on mode switch.

CHARGING GUIDE

MORE SMART CUSTOMIZATION  THROUGH BEITONG GAMEPAD ASSISTANT
Go to BEITONG’s official website www.betop-cn.com/en and download BEITONG Gamepad Assistant for more customization options.

1. STICK ADIUSTMENT. ADJUST SENSITIVITY ACCORDINGLY BASED ON GAME GENRES
2. CUSTOMIZABLE LIGHT
3. CUSTOM MAPPING & MACROS

FAQ

Q: MY GAMEPAD IS NOT CONNECTING WRELES SLY.
Usually it’s caused by jammed signals or insufficient battery. Please try the following:

1. Make sure that the gamepad is sufficiently charged. Try reconnecting after charging it for more than 1 hour.
2. Try a different USB port on the same device. A USB 3.0 port is recommended.
3. If nothing works, please contact our online technical support. Support Email: beitong-oversea@betop-cn.com

Q: WHAT KIND OF CHAR GER SHOULD I USE?
The standard charger is 5V 1A-2A.

Q: HOW DO I UPGRADE FIRMWARE?
Please install BEITONG Gamepad Assistant and follow the instructions provided by the software.

Q: THE ANAL OG S TICK IS STUCK IN A DIRECTION / DCS NO T CENTER P ROP ERLY?

1. Try forcing it back to the center and pressing down the stick slightly harder, which should re-center itself.
2. If 1) did not help, please contact customer support through beitong-oversea@betop-cn.com

PRODUCT SPECS

FC STATMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested against the listed standards and found to comply with the requirements of EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, and RF Directive 2014/53/EU. The CE marking can be used to certify that a product complies with European Union (EU) health, safety, and environmental requirements.

This product, its battery, or the packaging may bear this symbol, indicating that this product and any contained batteries must not be disposed of with your household waste. Instead, you are responsible for handing them over to applicable collection points for the recycling of batteries and electrical electronic equipment. This separate collection and recycling will help protect natural resources and prevent potential negative consequences for human health and the environment due to harmful substances that  may be present in batteries and electrical electronic devices, which could arise from improper disposal. For more information on where to dispose of batteries and electronic waste, please contact your local city/municipal office, your household waste disposal service, or the store where you purchased this product. For more information about the disposal of electrical electronic equipment and waste batteries, please contact beitong-oversea@betop-cn.com.

Customer Service

Dear Customer,
Thank you for choosing BEITONG gaming peripheral product. We aim to provide every gamer a better gaming experience. To submit a warranty claim, please include the following information in your email: a. Vendor Information b. Buyer ID c. Order Number d. Product Model Please describe the problems you’re having and how we can be of assistance:

What problems are you having?

• Faulty control b. Exterior damage
• Incompatibile with my device
• Incompatible with my game
• Others

How would you like to proceed?

• Replace
• Repair
• Return
• Others Support Email: beitong-oversea@betop-cn.com

Your feedback is highly appreciated and will help us to improve our product. Please tell us your thoughts on our product through our support email. Customers who provided valuable feedback may be eligible for free tech demos from us in the future. Sincerely,
BEITONG Customer Service Team

Documents / Resources

BEITONG KunPeng 40 Interlligent Gaming Controller [pdf] User Manual KunPeng 40, KunPeng 40 Interlligent Gaming Controller, Interlligent Gaming Controller, Gaming Controller, Controller

References

• User Manual