1. Уводзіны і большview
This manual provides essential information for the safe and effective use of your Bosch 1/2-inch Drive Ratchet Socket Set. Designed for automotive mechanics and general assembly tasks, this 25-piece set offers high torque performance and ergonomic design for comfortable operation.
The set includes a 1/2-inch ratchet, various 1/2-inch drive sockets, spark plug sockets, extension bars, and a universal joint adapter, all organized within a durable carrying case.
2. Кампаненты прадукту
The Bosch 1/2-inch Drive Ratchet Socket Set (Model 1600A02Z9F) includes the following components:
- 1x 1/2-inch Ratchet
- 19x 1/2-inch Drive Sockets (sizes 8mm-32mm)
- 2x Spark Sockets (16mm, 21mm)
- 2x Extension Bars (75mm, 250mm)
- 1x Universal Joint Adapter
- 1x футляр для пераноскі
3. Настройка
- Распакуйце набор: Carefully remove all components from the carrying case. Inspect each piece for any signs of damage.
- Выберыце правільны сокет: Identify the appropriate socket size (8mm-32mm) or spark plug socket (16mm, 21mm) required for your task.
- Attach Socket to Ratchet:
- Сумясціце квадратны выступ галоўкі з квадратным выступам на галоўцы храпоўкі.
- Push the socket firmly onto the ratchet until it clicks into place. The lock button on the ratchet ensures secure fixation.
Figure 3.1: Attaching a socket to the ratchet head. Ensure it clicks securely into place. - Using Extension Bars or Universal Joint: If additional reach or angle is needed, attach an extension bar or the universal joint adapter between the ratchet and the socket. Ensure all connections are secure.
4. Інструкцыя па эксплуатацыі
The Bosch 1/2-inch Drive Ratchet is designed for efficient and comfortable operation.
- Directional Change:
- Locate the intuitive switch on the ratchet head.
- Flick the switch to the left for loosening (counter-clockwise rotation) or to the right for tightening (clockwise rotation).
Figure 4.1: The directional switch on the ratchet head allows for quick changes between tightening and loosening. - Прыкладанне крутоўнага моманту:
- Position the socket firmly onto the fastener.
- Apply steady pressure to the handle and rotate the ratchet. The 72-tooth gear allows for a 5° working angle, enabling use in confined spaces.
- The ergonomic soft grip areas on the handle provide enhanced control and comfort during use.
Figure 4.2: Using the ratchet in a practical application, demonstrating its reach and ergonomic design. 
Figure 4.3: The ratchet being used for automotive repair, highlighting its suitability for engine work. - рэлеasing Sockets: To remove a socket, press the lock button on the ratchet head and pull the socket off.
5. Тэхнічнае абслугоўванне
Proper maintenance ensures the longevity and optimal performance of your Bosch Ratchet Socket Set.
- Уборка: After each use, wipe down all components with a clean, dry cloth to remove dirt, grease, and debris. For stubborn grime, use a mild degreaser and ensure all parts are thoroughly dried afterward.
- змазка: The ratchet mechanism benefits from periodic lubrication. Apply a small amount of high-quality grease or oil to the internal gear mechanism to ensure smooth operation and prevent wear. It is recommended to lubricate the ratchet before its first use, as it may not be pre-lubricated from the factory.
- захоўванне: Always store the set in its original carrying case in a dry environment to prevent rust and damage.
- агляд: Regularly inspect sockets, extension bars, and the ratchet for any signs of wear, cracks, or damage. Replace any damaged components immediately to ensure safety and performance.
6. Выпраўленне непаладак
This section addresses common issues you might encounter with your ratchet set.
- Socket not attaching securely:
- Ensure the socket size matches the drive size (1/2-inch).
- Verify that the lock button is not stuck or obstructed.
- Clean any debris from the ratchet drive and socket opening.
- Ratchet mechanism feels stiff or gritty:
- The ratchet may require lubrication. Refer to the "Maintenance" section for instructions on lubricating the internal gear mechanism.
- Check for any foreign objects or excessive dirt within the ratchet head.
- Ratchet slips or does not engage:
- Ensure the directional switch is fully engaged in either the tightening or loosening position.
- If the issue persists, the internal mechanism may be worn. Contact customer support for assistance.
7. Тэхнічныя характарыстыкі
| Нумар мадэлі | 1600A02Z9F |
| Памер дыска | 1/2 цалі |
| Колькасць частак | 25 |
| Material (Neck and Head) | Вугляродзістай сталі |
| Зубы шасцярні | 72 |
| Working Angle | 5° |
| Maximum Torque (Ratchet) | 768 Нм |
| Стандартны | ISO 3315 |
| Вага прадмета | 3.69 кілаграма |
| Краіна паходжання | Кітай |
8. Гарантыя і падтрымка
For warranty information, technical support, or service inquiries regarding your Bosch 1/2-inch Drive Ratchet Socket Set, please contact Bosch customer care.
вытворца: BOSCH Power Tools (China) Ltd.
Імпарцёр/Упакоўшчык (Індыя): Bosch Limited (Power Tools), Bosch Ltd., Post Box No: 3000, Hosur Road, Adugodi, Bangalore - 560030, India
Customer Care Number (India): 18004258665
Калі ласка, захавайце чэк аб куплі для прэтэнзій па гарантыі.
