Sleipner SE30 Tunnel Bow/Stern Thruster 12V User Manual

1. Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of your Sleipner SE30 Tunnel Bow/Stern Thruster 12V. The SE30 is a compact thruster designed for boats between 20-28 feet, offering 30-40 kg of thrust. It can be configured for both bow and stern applications. Please read this manual thoroughly before attempting any installation or operation to ensure safety and optimal performance.

2. Прадукт скончыўсяview

The Sleipner SE30 thruster system is engineered for reliable maneuvering in various marine conditions. Key features include:

• Compact design suitable for boats 20-28 feet.
• Flexible installation, allowing mounting at any angle within the tunnel.
• Electric motor can be rotated 90 degrees on its bracket for further installation adaptability.
• Galvanically isolated to prevent corrosion.
• Equipped with Sleipner's patented IPC (Intelligent Power Control) technology for enhanced safety and power management.

Figure 1: The Sleipner SE30 tunnel bow/stern thruster assembly. This image displays the main thruster unit, including the electric motor housing, the tunnel section, and the three-bladed propeller. The control unit, labeled SE30/125S2, is visible on the side of the motor housing, indicating the model and featuring various status indicators.

3. Настройка і ўстаноўка

Proper installation is crucial for the safe and effective operation of the thruster. It is highly recommended that installation be performed by qualified marine technicians.

3.1 Усталёўка тунэля

• The thruster is designed to be fitted into a tunnel through the boat's bow or a stern tunnel at the boat's stern.
• Sleipner offers solid and durable fiberglass stern tunnels designed to optimize thruster performance and ease of installation.
• The thruster can be mounted at any angle within the tunnel, providing significant flexibility for various hull designs.
• For boats with shallow drafts or obstructions at the stern, additional cowls (sold separately) may be required to facilitate proper installation.

3.2 Motor and Control Unit Placement

• The electric motor can be rotated 90 degrees on its mounting bracket, allowing for optimal positioning relative to available space and cable routing.
• Ensure the control unit and electrical connections are protected from direct water exposure and are easily accessible for inspection.

4. Інструкцыя па эксплуатацыі

The Sleipner SE30 thruster is designed for intermittent use to assist with docking and maneuvering. Avoid continuous operation to prevent overheating.

4.1 Асноўныя аперацыі

• Ensure the main power switch for the thruster system is engaged.
• Use the control panel or joystick to activate the thruster in the desired direction (port or starboard).
• Apply thrust in short bursts (typically 2-3 seconds) rather than continuous activation to allow the motor to cool and conserve battery power.
• The IPC (Intelligent Power Control) system monitors power usage and protects the thruster from overload.

4.2 Thruster Versions

The SE30 is available in different versions:

• версія па змаўчанні: On/off control.
• PRO-версія: Offers variable speed control for precise maneuvering.
• IP PRO Version: Includes ignition protection and variable speed control, suitable for specific engine room environments.

5. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and reliable performance of your thruster.

• Штогадовая праверка: Visually inspect the thruster unit, propeller, and tunnel for any signs of damage, corrosion, or marine growth.
• Ачыстка прапелера: Keep the propeller free from marine growth, fishing lines, or other debris that could impede its rotation or damage the seals.
• Электрычныя злучэнні: Check all electrical connections for tightness and corrosion. Ensure the galvanic isolation system is intact.
• Стан батарэі: Ensure your boat's battery system is in good condition and adequately charged to provide sufficient power to the thruster.
• Anode Replacement: Inspect and replace sacrificial anodes as necessary to protect against galvanic corrosion.

6. Выпраўленне непаладак

If you encounter issues with your thruster, perform the following basic checks before contacting service personnel.

• Thruster Not Responding:
  • Check if the main power switch for the thruster is ON.
  • Праверце аб'ём батарэіtagе і ўзровень зарада.
  • Inspect fuses or circuit breakers in the thruster's power circuit.
• Зніжаная цяга:
  • Check the propeller for marine growth, fishing lines, or other obstructions.
  • Ensure the thruster tunnel is clear.
  • Verify battery health and connections.
• Незвычайныя шумы або вібрацыі:
  • Immediately cease operation.
  • Inspect the propeller for damage or foreign objects.
  • Contact a qualified technician for further inspection.

For persistent issues or complex problems, it is recommended to consult an authorized Sleipner service center or a qualified marine electrician.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

Warranty information for the Sleipner SE30 thruster is typically provided with the product packaging or can be found on the official Sleipner webсайт. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

For technical support, spare parts, or service inquiries, please contact your authorized Sleipner dealer or visit the official Sleipner webсайт для кантактнай інфармацыі і рэсурсаў падтрымкі.