SHARP AN-SX8

SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8 User Manual

1. Уводзіны

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Прадукт скончыўсяview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

SHARP AQUOS Sound Partner AN-SX8 Neck Speaker

Малюнак 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Настройка

3.1 Зарадка прылады

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Уключэнне/выключэнне

3.3 Пачатковае спалучэнне Bluetooth

  1. Ensure the AN-SX8 is powered off.
  2. Націсніце і ўтрымлівайце кнопку харчавання прыблізна 5-7 секунд, пакуль індыкатар не пачне хутка міргаць, паказваючы рэжым спалучэння.
  3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
  4. Select "AN-SX8" from the list of found devices.
  5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Інструкцыя па эксплуатацыі

4.1 Злучэнне Bluetooth

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 Злучэнне AUX

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Рэгулятар гучнасці

4.4 Playback Control (Bluetooth Mode)

4.5 Call Handling (Bluetooth Mode)

5. Тэхнічнае абслугоўванне

5.1 Ачыстка

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Захоўванне

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Сыход за акумулятарам

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Выпраўленне непаладак

7. Тэхнічныя характарыстыкі

Фірмовае найменнеВОСТРЫ
Нумар мадэліAN-SX8
ВытворцаВОСТРЫ
Тэхналогія падлучэнняBluetooth, AUX
АсаблівасціБесправадная сувязь
Убудаваная акумулятарная батарэяYes (Inferred from product type and 'Wireless' feature, as 'Battery use: No' likely refers to disposable batteries)
Памеры ўпакоўкі28.2 х 27.9 х 7.5 см
Вага прадмета670 г
ASINB0CJNSM3VB
Першая даступная дата29 жніўня 2023 г

8. Інфармацыя па бяспецы

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

Каб атрымаць дадатковую дапамогу, наведайце SHARP Support Webсайт (напрampспасылка, фактычная спасылка можа адрознівацца).