Sygonix SY-5231014 Fingerprint/RFID Access System

1. Уводзіны

This manual provides essential information for the installation, operation, and maintenance of your Sygonix SY-5231014 Fingerprint/RFID Access System. This advanced access control unit features a vandal-proof metal housing, an illuminated keypad, and supports multiple access methods including fingerprint, RFID card, and PIN codes. It is designed for recessed installation and offers robust security with an IP55 rating, making it suitable for various indoor and outdoor applications. The system can manage up to 1000 users, including 10 designated visitors.

2. Інструкцыі па тэхніцы бяспекі

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• Электрабяспека: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before any wiring work.
• крыніца харчавання: Use only a compatible 12V/DC or 18V/DC power supply. Incorrect voltagе можа пашкодзіць прыладу.
• Умовы навакольнага асяроддзя: The unit has an IP55 rating, indicating protection against dust ingress and low-pressure water jets. Avoid direct exposure to heavy rain, submersion, or extreme temperatures.
• Vandalism Protection: While designed with a vandal-proof metal casing, extreme force can still cause damage.
• Тэхнічнае абслугоўванне: Не спрабуйце рамантаваць прыладу самастойна. Звяртайцеся па любыя паслугі па абслугоўванні да кваліфікаванага персаналу.

3. Змесціва ўпакоўкі

Carefully unpack the box and ensure all items listed below are present and undamaged. If any items are missing or damaged, contact your retailer immediately.

• Sygonix SY-5231014 Access System Unit
• Plastic Mounting Box (for recessed installation)
• Мантажныя шрубы і дзюбелі
• 30 cm Connection Cable for Access Control
• Дыёд
• Hex Key (Allen wrench)
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Настройка і ўстаноўка

The Sygonix SY-5231014 is designed for recessed installation. Proper installation is crucial for optimal performance and security.

4.1 Мантаж прылады

1. Падрыхтуйце адкрыццё: Create an appropriate opening in the wall or mounting surface to accommodate the plastic mounting box. Ensure sufficient depth for the unit and wiring.
2. Install Mounting Box: Secure the plastic mounting box into the prepared opening using the provided screws and plugs. Ensure it is flush with the surface.
3. Падключэнне правадоў: Refer to the wiring diagram (not provided in this text, refer to the full product manual for detailed diagrams) for connecting the power supply (12V/DC or 18V/DC), electric lock, and Wiegand interface if applicable. The included 30 cm cable facilitates these connections. Ensure all connections are secure and insulated.
4. Insert Diode: If connecting to an inductive load (e.g., an electric strike), install the provided diode across the lock terminals to protect the access controller from back-EMF.
5. Бяспечны галоўны блок: Carefully insert the main access control unit into the mounting box. Secure it using the provided screws, typically located on the front panel.

5. Інструкцыя па эксплуатацыі

The Sygonix SY-5231014 offers various methods for granting access and managing users.

5.1 Кіраванне карыстальнікамі

The system supports up to 1000 users, comprising 990 general users and 10 visitor users. User access can be granted via PIN, RFID card, or fingerprint.

• Даданне карыстальнікаў: Access the programming mode (refer to the full manual for specific programming codes and sequences). Select the option to add a new user. Follow the prompts to register a PIN, scan an RFID card, or enroll a fingerprint.
• Выдаленне карыстальнікаў: In programming mode, select the option to delete a user. You may need to enter the user's ID or present their access credential to remove them from the system.
• Visitor Users: Visitor users typically have time-limited or single-use access. Configure these settings within the programming mode.

5.2 Доступ да сістэмы

• PIN Access: Enter your registered PIN code on the illuminated keypad, then press the '#' key.
• RFID Card Access: Present your registered RFID card to the designated reader area on the unit.
• Доступ па адбітках пальцаў: Place your registered finger firmly on the fingerprint sensor.

Upon successful authentication, the relay will activate according to its configured mode (impulse or toggle), granting access.

5.3 Keypad Illumination

The keypad features illumination for improved visibility in low-light conditions. This feature is automatically active or can be configured within the system settings.

5.4 Relay Modes

The programmable relay can operate in either impulse or toggle mode:

• Імпульсны рэжым: The relay activates for a short, configurable duration (e.g., 1-99 seconds) after successful authentication, typically used for electric strikes or momentary lock releases.
• Рэжым пераключэння: The relay changes its state (ON to OFF, or OFF to ON) with each successful authentication, suitable for applications requiring a persistent state change, such as holding a door open until another authentication.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and reliable operation of your access system.

• Уборка: Выкарыстоўвайце мяккі, damp cloth to clean the keypad and fingerprint sensor. Avoid abrasive cleaners, solvents, or excessive moisture. Ensure the fingerprint sensor is free of dirt and smudges for accurate readings.
• агляд: Periodically check the unit for any signs of physical damage, loose connections, or wear.
• Абнаўленні праграмнага забеспячэння: Праверце вытворцы webсайт для атрымання даступных абнаўленняў прашыўкі, якія могуць палепшыць прадукцыйнасць або дадаць новыя функцыі.

7. Выпраўленне непаладак

If you encounter issues with your Sygonix SY-5231014, refer to the following common problems and solutions.

• Прылада не ўключаецца:
  Магчымая прычына: Няма харчавання або няправільная праводка.
  рашэнне: Verify the power supply is connected and providing the correct voltage (12V/DC or 18V/DC). Check all wiring connections for continuity and proper polarity.
• Access Denied (PIN/Card/Fingerprint):
  Магчымая прычына: Incorrect PIN, unregistered card/fingerprint, or sensor obstruction.
  рашэнне: Ensure the correct PIN is entered. Verify the RFID card or fingerprint is registered in the system. Clean the fingerprint sensor thoroughly. Re-enroll fingerprint if issues persist.
• Клавіятура не адказвае:
  Магчымая прычына: System freeze or internal fault.
  рашэнне: Disconnect power to the unit for 30 seconds, then reconnect to perform a soft reset. If the issue persists, contact technical support.
• Дзверы не адчыняюцца:
  Магчымая прычына: Lock malfunction, incorrect relay settings, or wiring issue.
  рашэнне: Check the electric lock for proper function. Verify the relay mode (impulse/toggle) and duration settings. Inspect wiring between the access unit and the lock.
• Illumination Not Working:
  Магчымая прычына: Feature disabled or internal fault.
  рашэнне: Check system settings to ensure keypad illumination is enabled. If enabled and still not working, contact technical support.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Sygonix webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.