Інструкцыя па эксплуатацыі партатыўнага разумнага праектара SWITCH SPR450

1. Уводзіны

This manual provides essential instructions for the safe and efficient operation of your SWITCH SPR450 Smart Portable Projector. Please read this manual thoroughly before using the device and retain it for future reference.

The SPR450 is a portable smart projector designed for versatile viewing experiences, featuring 450 ANSI lumens brightness, autofocus, and auto keystone correction. Its integrated battery allows for use in various locations without a power outlet.

2. Змесціва ўпакоўкі

Праверце, ці ёсць ва ўпакоўцы вашага прадукту ўсе пералічаныя ніжэй элементы:

• SWITCH SPR450 Smart Portable Projector
• Штатыў
• Зарадная прылада
• Пульт дыстанцыйнага кіравання

3. Настройка

3.1 Першапачатковая зарадка

Before first use, fully charge the projector using the provided charger. Connect the charger to the projector's power input and plug it into a wall outlet. The charging indicator will show the charging status.

3.2 Mounting the Projector

Attach the projector to the included tripod for stable placement. Ensure the tripod is on a flat, stable surface. The projector can also be placed directly on a flat surface.

Малюнак 3.2.1: Спераду view of the SWITCH SPR450 Smart Portable Projector, showing the power button and speaker grille.

Малюнак 3.2.2: бок view of the projector, highlighting the projection lens and sensors.

3.3 Powering On and Initial Projection

1. Націсніце і ўтрымлівайце кнопку харчавання на праектары або пульце дыстанцыйнага кіравання, каб уключыць яго.
2. Point the projector towards a flat, light-colored surface (wall or screen).
3. Асаблівасці праектара аўтафокус і auto keystone correction, which will automatically adjust the image for clarity and rectangular shape.
4. For ceiling projection, rotate the projector up to 90 degrees. The auto keystone correction will adjust the image accordingly.

Figure 3.3.1: The projector demonstrating its rotatable design for easy ceiling projection.

Figure 3.3.2: Diagram illustrating key features such as 450 ANSI Lumens brightness, autofocus with keystone correction, and easy ceiling projection.

4. Інструкцыя па эксплуатацыі

4.1 Навігацыя па інтэрфейсе

Use the provided remote control to navigate the projector's smart interface. The remote allows you to select applications, adjust settings, and control media playback.

4.2 Падключэнне знешніх прылад

The projector supports HDMI connectivity. Connect external devices such as laptops, gaming consoles, or media players using an HDMI cable to the projector's HDMI port. Select the HDMI input source from the projector's menu.

4.3 Выкарыстанне разумных функцый

The SPR450 comes with pre-installed smart applications. Connect the projector to a Wi-Fi network to access online content, including streaming services and video platforms. Follow the on-screen prompts to set up network connectivity.

4.4 Праца ад батарэі

The built-in battery provides portable operation. Battery life varies depending on usage and settings. To conserve battery, reduce brightness or enable power-saving modes if available in the settings.

Figure 4.4.1: The projector emphasizing its integrated battery for portable use.

5. Тэхнічнае абслугоўванне

5.1 Ачыстка аб'ектыва

Акуратна працярыце аб'ектыў праектара мяккай тканінай без ворса, спецыяльна распрацаванай для аптычных паверхняў. Не выкарыстоўвайце абразіўныя ачышчальнікі або празмерныя сілы, бо гэта можа падрапаць аб'ектыў.

5.2 Cleaning the Projector Body and Vents

Use a soft, dry cloth to clean the exterior of the projector. For vents, use a soft brush or compressed air to remove dust accumulation. Ensure the projector is powered off and unplugged before cleaning.

Малюнак 5.2.1: унізе view of the projector, showing the ventilation grilles.

5.3 Сыход за акумулятарам

To prolong battery life, avoid fully discharging the battery frequently. Store the projector in a cool, dry place when not in use for extended periods. Charge the battery periodically if stored for a long time.

6. Выпраўленне непаладак

• Няма харчавання: Ensure the projector is charged or connected to a power source. Check the power adapter and cable connections.
• Няма выявы: Verify the projector is powered on. Check the input source selection (e.g., HDMI). Ensure the lens cap is removed.
• Размытая выява: The projector has autofocus. If the image remains blurry, try moving the projector slightly or restarting it to re-engage autofocus. Ensure the lens is clean.
• Image is Tilted/Distorted: The projector has auto keystone correction. If the image is still distorted, ensure the projector is placed on a relatively flat surface or try adjusting its position.
• Няма гуку: Check the projector's volume settings and ensure it's not muted. If using an external source, check its volume and audio output settings.
• App Crashing (e.g., Netflix): Ensure the projector's software is up to date. Check for app updates within the projector's smart interface. Some applications may have specific compatibility requirements or regional restrictions. Contact customer support if the issue persists after updates.
• Пульт дыстанцыйнага кіравання не працуе: Check the batteries in the remote control. Ensure there are no obstructions between the remote and the projector's IR receiver.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

The SWITCH SPR450 Smart Portable Projector comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your package or visit the official SWITCH webсайт.

For technical support, troubleshooting assistance, or service inquiries, please contact SWITCH customer support through their official channels. Keep your purchase receipt and product serial number handy when contacting support.