Уводзіны
This manual provides detailed instructions for the assembly, operation, and maintenance of your VEVOR Stainless Steel Prep Table. Please read this manual thoroughly before use to ensure proper setup and safe operation. This prep table is designed for various applications including kitchens, laundry rooms, garages, and commercial settings, offering a durable and versatile workspace.
Інфармацыя па бяспецы
ПАПЯРЭДЖАННЕ: Do not exceed the weight limit of 440 lbs. Always assemble and secure the table properly to prevent tipping or collapse. Ensure all components are tightly fastened before placing items on the table. Keep hands clear of moving parts during assembly and adjustment. Use caution when moving the table, especially on uneven surfaces.
Ўстаноўка і зборка
The VEVOR Stainless Steel Prep Table is designed for quick and straightforward assembly. Follow these steps to set up your table:
- Insert Table Legs: Insert the four table legs into the pre-drilled holes on the top shelf.
- Install Undershelf: Assemble the undershelf into the columns. Ensure it is positioned at your desired height.
- Зацягніце кампаненты: Tighten all parts with the provided screws to ensure stability.
- Прымацаваць колы: Install the four casters into the bottom of the legs. Two of the casters include brakes for securing the table in place.
Assembly can typically be completed within minutes by following the instructions.
Image: Step-by-step assembly guide for the prep table.
Інструкцыя па эксплуатацыі
Your VEVOR Stainless Steel Prep Table is designed for versatile use. Here are key operational features:
- Грузападымальнасць: The top shelf can support up to 330 lbs (150 kg), and the undershelf can support up to 110 lbs (50 kg). Distribute weight evenly to maintain stability.
- Adjustable Undershelf: The undershelf offers 3 adjustable height levels, with distances between shelves of 16.9, 20.1, and 23.2 inches (43, 51, and 59 cm). This allows you to customize storage space for various items. To adjust, loosen the screws, reposition the shelf, and re-tighten securely.
- Мабільнасць: The table is equipped with four flexible casters, two of which have brakes. Engage the brakes when the table needs to remain stationary to prevent unwanted movement.
- Задняя панэль: The 2-inch (5 cm) high backsplash helps prevent items from falling off the back of the table, enhancing safety and convenience.
Image: Illustration of the adjustable undershelf.
Image: Details on load capacity and structural support.
Тэхнічнае абслугоўванне
To ensure the longevity and hygiene of your stainless steel prep table, follow these maintenance guidelines:
- Уборка: Сцерці з рэкламайamp cloth. For stubborn stains, use a mild detergent and rinse thoroughly. Avoid abrasive cleaners or scouring pads that can scratch the stainless steel surface.
- Рэгулярны агляд: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary.
- Сыход за кастэрамі: Каб забяспечыць плаўны рух, сачыце за тым, каб колы не мелі смецця. Пры неабходнасці змажце іх.
Image: Features of the advanced stainless steel construction.
Ліквідацыю непаладак
This section addresses common issues you might encounter with your prep table.
- Хістанне стала: Ensure all leg and shelf fasteners are securely tightened. Verify that the casters are fully inserted and locked if intended to be stationary. Check for uneven flooring and adjust leg levelers if applicable (this model has casters, so ensure brakes are engaged).
- Difficulty Moving Table: Check casters for debris or damage. Ensure caster brakes are disengaged. Clean casters if necessary.
- Паліца не роўная: Re-adjust the undershelf by loosening its screws, ensuring it is properly aligned, and then re-tightening.
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| мадэль | VV-SSWT-BJL-2436 |
| Матэрыял | Нержавеючая сталь |
| Грузападымальнасць верхняй паліцы | 330 фунтаў (150 кг) |
| Undershelf Load Capacity | 110 фунтаў (50 кг) |
| Памеры прадмета (Д х Ш х У) | 36 х 24 х 35 цалі (91.4 х 61 х 89 см) |
| Undershelf Size | 33.3 x 21.3 inch (84.5 x 54 cm) |
| Distance Between Shelves | 16.9 - 20.1 - 23.2 inch (43 - 51 - 59 cm) adjustable |
| Backsplash Вышыня | 2 цаляў (5 см) |
| Table Legs Diameter | 1.9 цалі (48 мм) |
| Вага прадмета | 37.5 фунтаў (17 кг) |
| Ролікі | 4 (2 with brakes) |
| Уключаныя кампаненты | 1 x Stainless Steel Prep Table, 1 x Pack of Accessories |
| Сыход за вырабам | Выцерці Damp Тканіна |
Выява: Падрабязныя памеры і характарыстыкі прадукту.
Медыягалерэя
Image: VEVOR Stainless Steel Prep Table in a kitchen environment.
Image: Prep table used as a commercial food preparation station.
Выява: Пад вуглом view of the prep table with casters.
Гарантыя і падтрымка
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VEVOR webсайт. Захоўвайце чэк аб пакупцы на выпадак прэтэнзій па гарантыі.
