1. Уводзіны
This manual provides essential information for the proper setup, operation, and maintenance of your Focal Aria K2 936 floorstanding loudspeaker. Please read these instructions carefully before using your speaker to ensure optimal performance and longevity.
The Focal Aria K2 936 is a high-fidelity 3-way bass-reflex floorstanding loudspeaker, featuring Focal's renowned K2 Power cone technology and an Ash Grey premium finish. It is designed for critical music listening in a dedicated home environment.
Image: Focal Aria K2 936 floorstanding speaker with its protective grille installed, viewрэд з кута.
2. Інструкцыі па тэхніцы бяспекі
Каб пазбегнуць пашкоджанняў і забяспечыць бяспечную працу, выконвайце наступныя меры засцярогі:
- Размяшчэнне: Position speakers on a stable, level surface. Avoid placing them near heat sources, direct sunlight, or in areas with high humidity. Ensure adequate ventilation around the speaker.
- Магутнасць: Connect speakers only to amplifiers within the recommended power range (50 - 300W). Overpowering can cause damage.
- Кабелі: Use high-quality speaker cables and ensure correct polarity (+ to + and - to -) for all connections.
- Уборка: Disconnect from power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or abrasive materials.
- Вентыляцыя: Do not block the bass-reflex ports or any ventilation openings.
- Абслугоўванне: Не спрабуйце абслугоўваць дынамік самастойна. Звяртайцеся па любыя паслугі па абслугоўванні да кваліфікаванага персаналу.
3. Змесціва ўпакоўкі
Carefully unpack your Focal Aria K2 936 speaker and verify that all components are present:
- Focal Aria K2 936 Floorstanding Loudspeaker (1 unit)
- Ахоўная рашотка
- Апорная пліта
- Adjustable Spikes (with spanner)
- Кіраўніцтва карыстальніка (гэты дакумент)
If any items are missing or damaged, contact your dealer immediately.
4. Настройка
4.1 Unpacking and Base Installation
- Асцярожна дастаньце дынамік з упакоўкі.
- Attach the provided base plate to the bottom of the speaker using the supplied screws. Ensure it is securely fastened.
- Screw the adjustable spikes into the base plate. These spikes help decouple the speaker from the floor, improving sound clarity. Use the spanner to adjust their height for stability and level positioning.
4.2 Размяшчэнне дынамікаў
Optimal speaker placement is crucial for sound quality. Consider the following:
- Стэрэавізуалізацыя: For a stereo setup, place the speakers equidistant from your primary listening position, forming an equilateral triangle.
- Адлегласць ад сцен: Avoid placing speakers too close to walls, as this can exaggerate bass frequencies. Experiment with distances to find the best balance.
- Сыходжанне: Злёгку нахіліце дынамікі ўнутр да месца праслухоўвання (нахілам ног унутр), каб аптымізаваць гукtage.
Image: Diagram illustrating the height (45.25"), depth (14.62"), and width (11.56") of the Focal Aria K2 936 speaker.
4.3 Падключэнне да Ampзадымнік
The Aria K2 936 features high-quality binding posts for ampпадлучэнне пад'ёмніка.
- Пераканайцеся ў сваім ampперад падключэннем пераканайцеся, што ліфцёр выключаны.
- Connect the positive (+) terminal (red) of the speaker to the positive (+) terminal of the corresponding ampканал Lifier.
- Connect the negative (-) terminal (black) of the speaker to the negative (-) terminal of the corresponding ampканал Lifier.
- Пераканайцеся, што ўсе злучэнні шчыльныя і надзейныя, каб пазбегнуць страты сігналу або кароткага замыкання.
Выява: Задняя частка view of the Focal Aria K2 936 speaker, highlighting the input terminals for ampпадлучэнне пад'ёмніка.
5. Інструкцыя па эксплуатацыі
5.1 Першапачатковае ўключэнне
Once all connections are made, you can power on your amplifier. Start with the volume at its lowest setting and gradually increase it to a comfortable listening level.
5.2 Перыяд абкаткі
Your Focal Aria K2 936 speakers require a break-in period to reach their full sonic potential. This typically involves 20-30 hours of playback at moderate volume. During this time, the drivers will loosen up, and the sound quality will improve, particularly in the bass and midrange.
5.3 AmpСупадзенне lifier
The Aria K2 936 has an impedance of 8 ohms and a recommended input power range of 50 - 300W. Ensure your amplifier's output power falls within this range to prevent damage to either the amplifier or the speakers and to achieve optimal sound reproduction.
6. Тэхнічнае абслугоўванне
Regular maintenance will keep your speakers looking and sounding their best:
- Уборка шафы: Use a soft, dry, lint-free cloth to wipe down the cabinet. For stubborn marks on the Ash Grey finish or leather-effect front panel, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid harsh chemicals.
- Сыход за кіроўцамі: The K2 cones are durable but should not be touched directly. If dust accumulates, use a soft brush or compressed air from a distance.
- Ачыстка рашоткі: The magnetic cloth frame grille can be gently vacuumed or brushed to remove dust.
7. Выпраўленне непаладак
If you encounter issues with your speakers, consult this section before contacting support:
- Няма гуку:
- Праверце ўсе кабельныя злучэнні паміж amplifier and speakers. Ensure they are secure and correctly polarized.
- Праверце ampЖывільнік уключаны і выбрана правільная крыніца ўваходнага сігналу.
- Test with another audio source or ampвыратавальнік, калі гэта магчыма.
- Скажоны гук:
- Reduce the volume. Overdriving the speakers or amplifier can cause distortion.
- Check speaker cable integrity for any fraying or damage.
- Забяспечце amplifier's output power matches the speaker's recommended range.
- Imbalanced Sound (one speaker louder/quieter):
- Check individual speaker connections for looseness or incorrect polarity.
- Праверыць amplifier balance settings.
- Swap speaker cables at the amplifier to determine if the issue follows the speaker or the ampканал Lifier.
- Humming or Buzzing:
- Ensure all components are properly grounded.
- Move speaker cables away from power cables or other electrical interference sources.
- Test different power outlets.
8. Тэхнічныя характарыстыкі
Detailed technical specifications for the Focal Aria K2 936 floorstanding loudspeaker:
| Асаблівасць | Спецыфікацыя |
|---|---|
| Тып мацавання | падлогавы |
| Тып дынаміка | 3-палосны бас-рэфлекторны падлогавы гучнагаварыцель |
| Драйверы дынамікаў | 3 x 6.5" (16.5cm) K2 woofer, 6.5" (16.5cm) K2 midrange, 1" (25mm) Al/Mg TNF inverted dome tweeter |
| АЧХ | 39 Гц - 28 кГц |
| Дыяпазон уваходнай магутнасці | 50 - 300 Вт |
| Імпеданс | 8 Ом |
| Адчувальнасць (2.83 В/1 м) | 92 дБ |
| Частата кроссовера | 260Hz / 3,100Hz |
| Матэрыял | MDF, Aramid Fibers, Aluminium/Magnesium, K2 |
| Колер | Попельна-шэры |
| Памеры прадукту (В x Ш x Г) | 48.82 цалі х 18.7 цалі х 12.2 цалі (124 х 47.5 х 31 см) |
| Вага прадмета | 64 фунтаў (29 кг) |
| Асаблівасці | K2 Power cone, Ash Grey Premium Finish, Leather Effect Front Panel |
Image: Detailed product data sheet for the Focal Aria K2 936, outlining key features and technical specifications.
9. Гарантыя і падтрымка
Focal products are designed and manufactured to the highest standards. Your Focal Aria K2 936 speaker comes with a limited warranty against defects in materials and workmanship.
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Focal website. For technical support, troubleshooting assistance, or service inquiries, please contact your authorized Focal dealer or Focal customer service directly.
Кантактная інфармацыя:
- Refer to your purchase documentation for dealer contact.
- Visit the official Focal website for global support contacts.
