Уводзіны
This manual provides detailed instructions for the safe and effective use of your Bissell Little Green Original ProHeat Machine. This portable carpet and upholstery steam cleaner is designed to tackle embedded dirt and stains, utilizing Heatwave Technology to maintain consistent water temperature for optimal cleaning performance.
Асноўныя функцыі ўключаюць у сябе:
- Тэхналогія цеплавой хвалі: Maintains consistent water temperature while cleaning.
- Stair Tool: Specifically designed to remove embedded dirt and stains from stairs and hard-to-reach corners.
- Trial Size Formulas: Includes trial sizes of Spot and Stain Formula and Oxygen Boost formula for immediate use.
Настройка
Before first use, ensure all components are present and undamaged. Refer to the included quick start guide for visual assembly instructions.
1. Запаўненне рэзервуара для чыстай вады
Locate the clean water tank (typically on the right side of the machine). Remove the tank by lifting its handle. Unscrew the cap and fill with warm tap water up to the designated 'WATER' fill line. For optimal cleaning, add the recommended amount of Bissell cleaning formula up to the 'FORMULA' line. Replace the cap securely and reinsert the tank into the machine, ensuring it clicks into place.
2. Прымацаванне інструментаў для ўборкі
Connect the desired cleaning tool (e.g., the stair tool or specialized tool) to the end of the flexible hose. Ensure a secure connection.
3. Падключэнне сілкавання
Unwind the power cord from its storage wraps and plug it into a grounded electrical outlet.
Image: The Bissell Little Green Original ProHeat Machine fully assembled, ready for use.
Інструкцыя па эксплуатацыі
1. Уключэнне
Press the red power button located on the top of the machine to turn it on.
2. Applying Cleaning Solution
Hold the cleaning tool directly over the stained area. Press the spray trigger on the tool handle to dispense the cleaning solution onto the surface. Allow the solution to penetrate the stain for a few minutes before scrubbing.
Image: The cleaning tool effectively removing a tough spill from carpet.
3. Scrubbing and Suction
Gently scrub the stained area with the brush on the cleaning tool. Apply downward pressure and pull the tool slowly over the wet area to suction up the dirty solution. Repeat this process until the stain is removed and the suctioned water appears clean.
Image: A user demonstrating portable carpet cleaning with the Bissell Little Green machine.
4. Heatwave Technology
The integrated Heatwave Technology helps maintain the water temperature throughout the cleaning process, enhancing the effectiveness of the cleaning solution.
Image: Visual representation of the Heatwave Technology within the cleaner's tank.
5. Specialized Tools
Utilize the specialized tools for different cleaning needs. The stair tool is ideal for stairs and tight corners, while other attachments can be used for pet hair or crevices.
Image: Various specialized tools included with the cleaner for versatile cleaning tasks.
Тэхнічнае абслугоўванне
1. Апаражніць рэзервуар для бруднай вады
After each use, or when the dirty water reaches the 'FULL' line, remove the dirty water tank. Unlatch the lid and carefully pour out the dirty water. The tank is designed for easy disassembly and cleaning.
2. Cleaning the Clean Water Tank
Rinse the clean water tank thoroughly with warm water after each use to prevent residue buildup. Allow it to air dry completely before storing.
3. Tool Cleaning
Rinse all cleaning tools under running water to remove any dirt or debris. Ensure they are dry before storing.
4. Захоўванне
Wrap the power cord neatly around the designated cord wraps. Store the hose and tools securely on the machine. Store the unit in a dry, protected area.
Image: The compact design allows for easy storage in small spaces.
Ліквідацыю непаладак
If your machine is not operating as expected, please check the following common issues:
- Няма харчавання: Ensure the power cord is securely plugged into a working electrical outlet and the power button is pressed.
- Без распылення: Check if the clean water tank is filled and properly seated. Ensure the spray trigger on the tool is being pressed.
- Слабае ўсмоктванне: Verify that both the clean and dirty water tanks are correctly installed. Check the hose and tools for any blockages.
For more detailed troubleshooting, please refer to the complete user manual or contact Bissell customer support.
Тэхнічныя характарыстыкі
- Марка: Бісэл
- мадэль: 2513E (Original ProHeat)
- Вага прадмета: 8.58 фунта
- Памеры прадукту: 6.5" Г x 12" Ш x 14.5" У
- Крыніца харчавання: Hand-Operated
- Ёмістасць: 4155.82 кубічных цаляў
- Тэхналогія: Heatwave Technology
Гарантыя і падтрымка
Каб атрымаць інфармацыю аб гарантыі, рэгістрацыі прадукту або падтрымцы кліентаў, наведайце афіцыйны сайт Bissell. webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.
