JBL StagКіраўніцтва карыстальніка для 2-палосных кааксіяльных аўтамабільных дынамікаў e 602 6-1/2"

Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance.

Асноўныя характарыстыкі

• Тып дынаміка: 6.5" Stage Series 2-Way Coaxial Car Speakers
• Матэрыял конусу: Injection-molded polypropylene cone for enhanced durability and sound quality.
• Твітар: PEI Balanced Dome Tweeter for clear high-frequency reproduction.
• Імпеданс: 4 ohms, optimized for compatibility with a wide range of car audio systems.
• АЧХ: 55 - 22000 Hz, providing a broad audio spectrum.
• Адчувальнасць: 91dB, ensuring efficient power conversion into sound.
• Харчаванне: 135W Peak / 45W RMS per speaker.
• Глыбіня верхняга мантажу: 2-5/16" for flexible installation.

Змест пакета

Ваш JBL Stage 602 speaker package typically includes the following items:

• Two (2) JBL Stage 602 6-1/2" Coaxial Speakers
• Дзве (2) рашоткі для дынамікаў
• Мантажныя элементы (шрубы, заціскі)
• Speaker Brackets (for various mounting options)
• Speaker Foam (for minimizing unwanted sounds/vibrations)
• Owner's Manual / Documentation

Настройка і ўстаноўка

Proper installation is crucial for optimal sound performance and speaker longevity. If you are unsure about any steps, it is recommended to seek professional assistance.

1. Тэхніка бяспекі

• Перад пачаткам любых электрамантажных работ адключыце акумулятар аўтамабіля.
• Карыстайцеся адпаведнымі сродкамі бяспекі, у тым ліку ахоўнымі акулярамі.
• Ensure all wiring is correctly connected to prevent damage to the speakers or vehicle's electrical system.
• Avoid overtightening screws to prevent stripping or damaging mounting surfaces.

2. Падрыхтоўка да ўстаноўкі

1. Выдаліць існуючыя дынамікі: Carefully remove the existing car audio speakers from their mounting locations (e.g., door panels, rear deck). This may involve removing trim panels, screws, and disconnecting wiring.
2. Праверце ўстаноўку: Compare the JBL Stage 602 speakers with the original speakers and the mounting location. Use the provided mounting brackets if necessary to ensure a secure fit.
3. Праводка: Identify the positive (+) and negative (-) speaker wires from your vehicle's audio system. Ensure proper polarity when connecting the new speakers.

3. Мацаванне дынамікаў

1. Бяспечныя дынамікі: Place the JBL Stage 602 speakers into the prepared mounting locations. Use the provided screws to secure them firmly. If using mounting brackets, attach the brackets first, then the speakers to the brackets.
2. Нанесці пену: Apply the included speaker foam around the speaker's edge where it meets the mounting surface. This helps to minimize vibrations and improve sound quality by creating a better seal.
3. Падключэнне правадоў: Connect the vehicle's speaker wires to the terminals on the JBL Stage 602 speakers. Ensure the positive (+) wire connects to the positive terminal and the negative (-) wire connects to the negative terminal.
4. Усталяваць краты: If desired, attach the speaker grilles over the speakers.
5. Зборка: Reassemble any removed trim panels or components.

4. General Installation Guidance

For a visual guide on upgrading car audio speakers, including insights into speaker components and mounting options, refer to the video below. This video provides general information applicable to JBL GTO series speakers, which share similar installation principles.

Кіраванне дынамікамі

Пасля ўсталёўкі ваш JBL Stage 602 speakers will operate as part of your vehicle's existing audio system. No specific operational controls are on the speakers themselves.

• Крыніца гуку: Play audio through your car's head unit (radio, CD player, media player).
• Рэгулятар гучнасці: Адрэгулюйце гучнасць з дапамогай элементаў кіравання на галаўной прыладзе.
• Рэгулятары тону: Utilize your head unit's equalizer (EQ), bass, treble, and balance/fader controls to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
• Перыяд абкаткі: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their optimal sound performance.

Тэхнічнае абслугоўванне і догляд

Каб забяспечыць даўгавечнасць і бесперапынную працу вашага JBL Stage 602 speakers, follow these maintenance guidelines:

• Уборка: Акуратна працярыце рашоткі дынамікаў і акантоўку мяккай сухой тканінай. Пазбягайце выкарыстання агрэсіўных хімікатаў або абразіўных ачышчальнікаў.
• Пазбягайце празмернай улады: Do not drive the speakers with an amplifier that exceeds their recommended RMS power handling (45W RMS per speaker) to prevent damage.
• Фактары навакольнага асяроддзя: Protect speakers from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
• Рэгулярны агляд: Periodically check the speaker cones and surrounds for any signs of damage or wear.

Ліквідацыю непаладак

If you experience issues with your speakers, consult the following common troubleshooting steps:

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

JBL Stage 602 speakers come with a 1-гадовая абмежаваная гарантыя. For warranty claims, technical support, or further assistance, please contact JBL customer service or visit the official JBL webсайт.

Каб атрымаць дадатковую інфармацыю аб прадукце і падтрымку, вы можаце наведаць Крама JBL на Amazon.