BCS 620 Tractor Instructions

BCS 620 Tractor

Specifications

• Engine: Honda GX240
• Electric Start Option: No
• Transmission: All Gear Drive
• Clutch Type: Double Cone, Spring Loaded
• Axle Configuration: Straight Axle
• Working Gears: 3 forward, 3 reverse
• Working Gear Speeds: 0.8 mph, 1.8 mph, & 2.7 mph
• Transport Gear: Yes, 4th gear
• Transport Gear Speed: 8.3 mph
• Standard Wheel/Tire Size: 4x10x18″
• Weight: 200 lbs.
• Parking Brake: Yes

OVERVIEW

The BCS model 620 differs from the majority of the BCS tractor fleet because it’s designed for front-mount attachments only. This means the handlebars don’t rotate 180º, and it will not operate rear-mount attachments like the Tiller or Rotary Plow.

Model 620 is for applications where only front-mount attachments are desired, and it offers versatility with the ability to attach various mowers, snow implements, and blades. With three working speeds and one transport speed, the 620 offers an appropriate speed for every application. The only limitations are that the straight axle design limits its maneuverability, and the 8hp engine limits the size of the mowers and snow throwers that can be accommodated.

FEATURES

• Designed for Front-Mount Attachments ONLY
• All Gear Drive w/ Heat-treated Steel Gears & Embedded Ball Bearings
• Double Cone Clutch
• Best Warranty in the Industry
• Limited Lifetime Transmission Warranty*
• 3-year Engine Warranty
• Convenient Shuttle-style Forward/Reverse Control
• Easily Adjusted Anti-Vibration Handlebars
• 7 Vertical Handlebar Settings
• 3 Horizontal Handlebar Settings
• Three Working Speeds
• Transport Speed (front-mount only)

Identifying Compatible Tractor Model

1. Check if the tractor engine has been replaced.
2. If the engine has been replaced, confirm the horsepower rating of the replacement engine.
3. Refer to Service Bulletin 1-8 for the original engine specs of all tractor models.

Finding Compatible Attachments

Once the comparable current model is identified:

• Visit the BUILD-YOUR-BCS Configurator on the website.
• Select the appropriate tractor model in Step 2.
• Click back to see all compatible attachments.
• Alternatively, refer to the Compatibility Chart in the printed brochure.

Use the chart below to identify the current tractor model to use as a basis for attachment compatibility. Please verify the tractor engine has not been replaced. If so, the horsepower rating of the replacement engine should be confirmed. Refer to Service Bulletin 1-8 for the original engine specs of all tractor models.

Once you’ve identified the comparable current model, use the BUILD-YOUR-BCS Configurator on our website to find compatible attachments (start by clicking on Step 2 and selecting the appropriate tractor, then click back to see all compatible attachments), or use the Compatibility Chart found in the back of our printed brochure.

FAQs