BAUHN ASBBT-0725 2.0 Channel Bluetooth Soundbar User Manual

This manual tells you all you need to know about using your new BAUHN® product.
Please take special note of any important safety and usage information presented with the symbol.

All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.
Domestic use only: This product is intended for indoor domestic use only. It is not suitable for commercial, industrial or outdoor use. Do not use this product for anything other that its intended purpose, and only use it as described in this manual.

We hope you will enjoy using your purchase for many years to come.

Unpack and Prepare

What’s in the box
Before setting up your new Soundbar, check you have everything:

A. 2.0 Channel Soundbar
B. Remote Control

C. AAA Activ Energy Batteries
D. 3.5mm Audio Cable

E. Wall Mount Installation Kit (See next page for more information.)
F. Quick Start Guide

G. User Manual
H. Warranty Certificate

I. General Safety Warnings

You will need:
Phillips-head screwdriver and a drill (for wall mount installation.)
HDMI ARC cable if you want to set up and use HDMI ARC. (Alternatively you can use either an optical audio cable or coaxial audio cable if not using HDMI ARC.)

Wall Mount Installation Kit

The illustration below shows the contents of the wall mount installation kit. These are the parts you will need when wall mounting the soundbar. Some parts are not shown at the same scale.
Note: If you choose to wall mount the soundbar, it is recommended to use an HDMI adapter in order to fit properly.

Plastic anchor (2)
Long screw (2)

Important Tips

Place the Soundbar on a level surface.

Place the Soundbar away from any source that may generate heat or vibrations.
Make sure there is enough space around the Soundbar for airflow.

The remote control works up to 6 metres away from the Soundbar.
Unplug the Soundbar before cleaning it.

Clean using a dry cloth only – do not use water or chemicals.
Use only the power supply provided.

Keep liquid, children and pets away from the Soundbar at all times.

Installation – Free Standing

This soundbar can sit free-standing on a surface, or it can be mounted to a wall.Place on a secure, flat surface. Make sure the soundbar is standing on its rubber pads (on the left and right sides of the soundbar) and no other area of the bottom of the soundbar is touching the surface.

Installation – Wall Mounted

Wall mounting instructions are on the following pages.

Wall mounted installation must be carried out
by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage! If you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing, which may be hidden inside or behind the wall.
It is the installer’s responsibility to verify and confirm that the wall will safely support the total load of the soundbar and wall brackets.
Additional tools (not included) are required for the installation.
Do not overtighten screws.
If mounting on a wood stud wall, use an electronic stud finder to locate the centre of the framing studs before drilling and mounting.

Wall Mounting Instructions

Note: The sound bar has two keyhole slots on the back to enable wall mounting, using the fixings provided. The distance between the two keyholes is 700mm.
Use a pencil to make 2 drill hole marks on the wall for the adaptors. Make sure the marks are level before drilling. Use a 6mm bit and power drill (not supplied) to drill holes on the marks.
Note: For a wood stud wall, use an electronic stud detector to locate the centre of the framing studs before marking and drilling the holes.
Use the supplied screws and plastic anchors to fix the wall mount adaptors onto the drilled hole marks. Once fixed to the wall, hang the soundbar onto the wall mount adaptors.

Connect to Power

Controls and Connections

Get to know your Soundbar

(POWER/SOURCE):
Press and hold the power button about 1.5s to turn on/off the soundbar.
Once switched on, press the power button momentarily to switch between input sources.
Once switched on, press the power button twice to enable/ disable sound playback.
VOL +/- Increase/decrease the volume level.
Skip to the previous next track
Press and hold the / buttons on the soundbar simultaneously to disconnect the paired Bluetooth device.

Rear Ports on the Soundbar

Rear Ports on the Soundbar HDMI (ARC)
To use the ARC function, make sure the soundbar’s HDMI (ARC) socket is connected via a HDMI cable (not included) to the HDMI (ARC) socket of your ARC compliant TV. Then just use your TV’s remote control to adjust the volume output (VOL +/– and MUTE) of the connected audio device. In the TV settings menu, turn on the ARC and CEC function (when CEC is turned on, the sound bar will turn on/off automatically when the TV is turned on/off).

Remote Control

Setup
Insert two AAA size batteries according to the polarity markings (+ / -) inside the compartment. Make sure the batteries are correctly aligned and properly pushed into place.

Precautions When Using Batteries

Do not use old and new batteries together.
Do not use different types of batteries (e.g. Manganese and Alkaline batteries) together.

Remove the batteries from the remote if you do not intend to use it for a long time.
When discarding used batteries, follow any guidelines for recycling and disposal of batteries that apply in your local area.
Keep batteries away from children and pets.

Never throw batteries into a fire or expose them to extreme heat.

Using the Remote Control
To use the remote control, point it towards the remote control sensor at the front of the soundbar. The remote control will not operate if its path is blocked.
The remote control has a range of up to about 6 metres from the soundbar at an angle of up to 30 degrees to either side of the sensor, as illustrated below.

Remote Control Use

Do not drop, step on or otherwise impact the remote control. This may damage the parts or lead to a malfunction.
Do not place objects between the remote control and the remote control sensor.
Do not use this remote control while simultaneously operating a remote control for other devices.

Remote Control Overview

Operation

General Operation

Input Modes Note: Press the LED button of the remote control to switch on/off the display.

Function Display

Bluetooth®
You can listen to tracks from a media device if connected to the soundbar via Bluetooth® wireless technology.

Pairing Bluetooth® Devices
The first time you use your Bluetooth® device with the soundbar, you will need to pair them with one another.
Activate Bluetooth® on your compatible device, and set it to search for compatible devices.
Select ‘BAUHN ASBBT-0725’ from the list of found devices.

Note: Only one playback unit can be connected to the soundbar. If the soundbar is already connected to another playback unit, the soundbar will not appear in the Bluetooth® selection list. To disconnect the existing paired device. Press and hold the buttons on the soundbar simultaneously to disconnect the paired Bluetooth device.
If your device asks for a passkey (depending on the device manufacturers, model and software version), then enter the digits “0000” and press OK.

The operational range between this soundbar and a Bluetooth® device is approximately 10 metres (without any object between the Bluetooth® enabled device and the soundbar). Any obstacles between the devices can reduce the operational range.

Before you connect a Bluetooth® enabled device to this soundbar, ensure you know the device’s capabilities. Compatibility with all Bluetooth® devices is not guaranteed.
If the signal strength is weak, your Bluetooth® receiver may disconnect, but it will re-enter pairing mode automatically.
If a mobile phone on which you are playing music receives a call, the music will be interrupted. The phone call audio however is not played via the soundbar. Once you end the call, the devices are connected to each other again and playback resumes.

Your device will also be disconnected when your device is moved beyond the operational range. If you want to reconnect your device, place it within the operational range.
If the connection is lost, follow the instructions (left) to pair your device to the soundbar again.

Troubleshooting

If you have problems with the soundbar, check below for advice. If you don’t find a solution here, contact After Sales Support on 1300 002 534.

Specifications

Power supply AC 100-240V, 50/60 Hz
Power consumption 65W Max.
Speaker output 4 x 15W

Bluetooth® pairing operation range – distance Up to 10 metres
Bluetooth® pairing name BAUHN ASBBT-0725
USB output DC 5V, 100mA (for playback only, not for charging devices)

Dimensions (W x H x D) 855mm x 72mm x 104mm
Weight 2.4kg

For Technical Support: 1300 002 534 tempo.org/support
Distributed by Tempo (Aust) Pty Ltd, PO Box 6097, North Sydney, NSW 2059

Compliance and Responsible Disposal

Packaging
The packaging of your product has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please recycle these materials rather than throwing them away.
Product
At the end of its working life, do not throw this product out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could potentially be hazardous to the environment and human health.
Compliance
This product complies with the Australian Safety Standard AS/NZS 62368.1 to ensure the safety of the product.

Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.

Warranty Information

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Repair and Refurbished Goods or Parts Notice
Unfortunately, sometimes faulty products are manufactured, which need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 002 534 or write to us at:

Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6097, North Sydney NSW 2059
Telephone: 1300 002 534 (Aust) – Fax: (02) 8977 3765

Tempo Help Desk: 1300 002 534 (Aust) (Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm AEST)
Email: tempo.org/support

Online support
Visit bauhn.com.au for software updates to keep your soundbar up-to-date, as well as the latest User Manual for information on the updated features.

Warranty returns
Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.

Product does not work?
If you encounter problems with this product, or if it fails to perform to your expectations, please contact our After Sales Support Centre on 1300 002 534.
ALDI guarantees that our products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.

AFTER SALES SUPPORT

MODEL: ASBBT-0725 PRODUCT CODE: 719778 07/2025
AUS 1300 002 534 tempo.org/support

Documents / Resources

BAUHN ASBBT-0725 2.0 Channel Bluetooth Soundbar [pdf] User Manual
ASBBT-0725 2.0 Channel Bluetooth Soundbar, ASBBT-0725, 2.0 Channel Bluetooth Soundbar, Channel Bluetooth Soundbar, Bluetooth Soundbar, Soundbar

References

User Manual

BAUHN ASBBT-0725 2.0 Channel Bluetooth Soundbar