basalte Eve Plus Table Base Installation Guide

Eve Plus Table Base

Product Information

Specifications:

• Made in: Belgium
• Manufacturer: Basalte bv
• Product Name: Eve Plus table base
• Model Number: 0151-xx
• Components: A table base, B plus connector, C adjustable angle,
  D cable route, E USB-C connector, F lock for the table mount, G
  USB-C charging cable (0093-19, included but also separately
  available), H table mount

Product Usage Instructions:

1. Identification of the Parts:

Identify the different parts of the Eve Plus table base
according to the following list:

• A – Table Base
• B – Plus Connector
• C – Adjustable Angle
• D – Cable Route
• E – USB-C Connector
• F – Lock for Table Mount
• G – USB-C Charging Cable
• H – Table Mount

2. Mounting the Table Base:

1. Mark the location of the table mount using the provided
   template.
2. Screw the table mount onto the table surface.
3. Place the table base over the table mount.
4. a. Start by placing one corner in position.
5. b. Push the other corner into a locked position.

Frequently Asked Questions (FAQ):

Q: Is the Eve Plus table base compatible with all types of
tables?

A: The Eve Plus table base is designed to be compatible with
most tables. Ensure that the table surface is suitable for mounting
before installation.

Q: Can I purchase additional USB-C charging cables for the Eve
Plus table base?

A: Yes, USB-C charging cables are included with the product but
can also be separately purchased as needed.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Made in Belgium
Basalte is a registered trademark of Basalte bv. Eve Plus is a registered trademark of Basalte bv. Eve Plus is a registered design of Basalte bv.
basalte bv fraterstraat 37b I 9820 merelbeke I belgium tel +32 9 385 78 38 I info@basalte.be I www.basalte.be

© 2025 basalte v2.0

Eve Plus table base
installation manual

1. identification of the parts
Eve Plus table base 0151-xx A table base B plus connector C adjustable angle D cable route E USB-C connector F lock for the table mount G USB-C charging cable (0093-19, included but also separately available) H table mount

B C
A

D

E

G

F H

2.mounting the table base 1. Mark the location of the table mount using the provided template. 2. Screw the table mount on the table 3. Place the table base over the table mount. 4. a. Start with placing one corner in position
b. Push the other corner into a locked position.
important remarks · USB-C power supply not included. For optimal charging,
use in combination with the Puck – 24V DC – USB-C (0610-04). · To upgrade to a PoE connection for your Eve Plus table base, add our
Eve Gigabit PoE adapter (0610-21). · The output power of the table base is 15 W.

1.

template

2.

3.

4.

a

b

front