PX-1-R-CONNECT Digital Audio Processor
“
Specifications
- Type: Expert Electronics PX.1 / PX.1 CONNECT
- Max. Input level: 6 Vrms
- Input impedance: Not specified
- Max. Output level: Not specified
- Output impedance: Not specified
- Resolution: Not specified
- Sampling frequency: Not specified
- Processing latency: Not specified
- Frequency response: Not specified
- THD + D max: Not specified
- Signal-to-noise ratio: Not specified
Product Usage Instructions
Description of Elements
(1) LCD display for configuration and monitoring
(2) Rotary encoder responsible for parameter selection and
changes
(3) Use these keys to select the channel to be configured; may
be used inside any menu. If used on the home screen, it changes the
channel
(4) Use ESC to go back to the previous parameter or menu
(5) Processor output channels, connect to the amplifiers
(6) Input sensitivity adjustment from 2 to 6 Vrms
(7) Signal inputs, must be connected to the output of the player
or mixer
(8) Power connector must be supplied with 12Vdc, the REM IN must
be connected to the player’s remote and the REM OUT is sent to the
amplifiers
(9) Bluetooth antenna (available only for Connect Line
model)
Bluetooth Connection
BLUETOOTH INTERFACE
Using a didactic and intuitive interface, the user can configure
Expert Electronics processors via smartphone or tablet, thus
allowing easy system alignment, which can be done in front of the
system and in real-time.
Functions:
- Channel routing
- Overall gain
- Output gain
- Delay Input equalizer (EQ IN)
- Output equalizer
- Polarity inversion
- 100% configurable memories
- Protection password
- Signal generator RMS Limiter
- Peak limiter
Pairing Instructions:
- Download the application from Google Play Store or Apple
Store - Activate the device location
- Activate the Bluetooth connection on your device
- Open the application and allow it to search for devices
- Select the processor from the list of available devices
- Enter the password (Factory password: 0000)
- To change the password, follow the on-screen instructions
within the app
Frequently Asked Questions (FAQ)
Q: Can I download the configuration app on any device?
A: The app is available for download on Google Play Store or
Apple Store for CONNECT line models only.
Q: What is the factory password for the processor?
A: The factory password is 0000. You can change it within the
app settings.
“`
USER MANUAL
PX.1 / PX.1 CONNECT
Read before using
TABLE OF CONTENTS
Introduction
3
Description
4
Functional Diagram
5
Description of Elements
6
Bluetooth Connection
6
Technical Specifications
8
/Expert-Electronics visit www.bandaaudioparts.com
INTRODUCTION
Congratulations! You have just purchased a product with the Expert Electronics quality. Developed by Qualified Engineers and a high-tech laboratory. To ensure optimal operation, please read this manual carefully before using the product. Keep the manual in a safe and accessible place for future referece.
3
DESCRIPTION
2 signal inputs 4 independent outputs 2 links outputs Channel routing Input equalizer with 10 bands spaced in ¼ octave Parametric equalizer with 1 independent band per channel Crossover with Butterworth, Linkwitz-Riley and Expert type filters with attenuations from 6 to 48dB/8º Independent delay per channel Limiter with configurable Threshold, Attack and Release Peak limiter with Threshold adjustment
Polarity inversion Input gain Independent mute function per channel Frequency and sweep generator User password (available only for Connect Line model) 3 100% configurable memories Independent gain per channel Remote output with 300 ma Power tolerance of 9 to 16 Vdc Bluetooth communication interface (available only for Connect Line model) Language
4
FUNCTIONAL DIAGRAM
5
DESCRIPTION OF ELEMENTS
(1) LCD display for configuration and monitoring
(2) Rotary encoder responsible for parameter selection and changes
(3) Use these keys to select the channel to be configured; may be used inside any menu. If used on the home screen, it changes the channel
(4) Use ESC to go back to the previous parameter or menu
(5) Processor output channels, connect to the amplifiers
(6) Input sensitivity adjustment from 2 to 6 Vrms
(7) Signal inputs, must be connected to the output of the player or mixer
(8) Power connector must be supplied with 12Vdc, the REM IN must be connected to the player’s remote and the REM OUT is send to the amplifiers
(9) Bluetooth antenna (available only for Connect Line model)
BLUETOOTH CONNECTION (AVAILABLE ONY FOR CONNECT LINE MODEL)
BLUETOOTH INTERFACE
Using a didactic and intuitive interface, the user can configure Expert Electronics processors via smartphone or tablet, thus allowing easy system alignment, with can be done in front of thesystem and in real-time.
The app can be download free from Google Play or Apple Store
6
BLUETOOTH CONNECTION (AVAILABLE ONY FOR CONNECT LINE MODEL)
FUNCTIONS
Channel routing Overall gain Output gain
Allows for more precise adjustments Delay Input equalizer (EQ IN)
Allows you to change values by pressing the Router button to make adjustments Output equalizer
Polarity inversion 100% configurable memories Protection password Signal generator RMS Limiter
Greater accuracy Peak limiter
PAIRING
Download the application on Google Play Store or Apple Store Activate the device location Activate the Bluetooth connection Open the device The device automatically recognizes the processor Select the processor Enter the password Factory password: 0000
To change the factory password just type in the new password and click OK To change the factory again, the processor must be reset
AT TEN TION
Google Play Store or Apple Store application available only for CONNECT line
models.
7
* These typical figures may vary slightly
TECHNICAL SPECIFICATIONS
Type Connection Max. Input level Input impedance
Type Connection Max. Output level Output impedance
Resolution Sampling frequency Processing latency Frequency response THD + D max Signal-to-noise ratio
Voltage Consumption Fuse
DIMENSIONS (H x W x D)
154mm
INPUTS
Balanced RCA 2 to 6Vrms 100K
OUTPUT (1, 2, 3, 4)
Unbalanced RCA 3.5Vrms 470R
TECHNICAL DATA
24 Bits 48 Khz 1.08ms 10 Hz to 22 Khz (-1dB) 0,01% 100dB
POWER
10~15Vdc 300ma (5w) 1A
0.42Kg
Weight
46mm 104mm
8
9
WARRANTY TERMS
Warranty valid for 12 months (one year), starting from the date of purchase, if purchased from an authorized Expert Electronics dealer. Will be covered by warranty components and/or parts comproved that shows failures in process manufacture or damaged components. Warranty don’t cover: 1. Equipment, parts or components previously altered by unauthorized people. 2. Damages caused by accidents (fall, crash, etc) or natural disasters (overflow, burning, etc). 3. Improper instalation (improper wiring, abuse, installation out of specifications). 4. Shipping costs In case needed any repair, contact the dealer for warranty instructions.
ADDRESS: Banda Audioparts Rua Sofia Atauri Fadin, 256 Neighborhood: Santa Terezinha II Paulínia – SP Brazil Zip Code: 13148-142
NOTE: If out of warranty,repair costs (if needed) will be charged from client. Phone: 55 (19) 3844-7173 e-mail: suporte@expertelectronics.com.br Expert Electronics reserved rights to alter caracteristics of the product without previously advice.
WARRANTY REGISTRATION: Name:………………………………………………………………………………………………………………………………………………………………………… Register:…………………………………………………………. Date:……………………………………… Phone:………………………………………….. Address:…………………………………………………………………………………………………………………………………………………………………….. Dealer:………………………………………………………………………………………………………………. Phone:…………………………………………..
/Expert-Electronics visit www.bandaaudioparts.com
Documents / Resources
![]() |
BANDA AUDIOPARTS PX-1-R-CONNECT Digital Audio Processor [pdf] User Manual PX-1-R, PX-1-R-CONNECT, PX-1-R-CONNECT Digital Audio Processor, PX-1-R-CONNECT, Digital Audio Processor, Audio Processor, Processor |