BML-24564 3D Printer
“
Specifications
- Product Code: BML-24564
- EAN13: 6975337036173
- Weight: 8.200000 kg
Product Information
The BML-24564 3D printer, also known as the Bambu Lab A1 mini,
is a compact and versatile 3D printing device designed for creating
various objects with precision and detail.
Usage Instructions
1. Usage Information and Warnings
a. Avoid Burns: Do not touch the nozzle or
heated bed while the printer is operating.
b. Placement: Keep the printer away from heat
sources and flammable materials. Place it in a well-ventilated,
cool, and dust-free area.
c. Safety Gear: Do not wear gloves or loose
clothing to prevent entanglement with moving parts.
d. High-Speed Parts: Be cautious of high-speed
moving parts to prevent entrapment risk.
e. Supervision: Children under 10 should not
use the printer without supervision.
f. Maintenance: Regularly clean the printer
with a dry cloth to ensure proper functioning.
2. Unpacking and Assembly
Follow the assembly instructions provided in the user manual to
set up the printer correctly before use.
3. Intended Use
The printer should only be operated by qualified personnel
within the specified parameters. Check for damage before each
use.
FAQ
Q: Can children use the printer unsupervised?
A: No, children under the age of 10 should not operate the
printer without supervision to prevent injury.
“`
3D Printer User Manual
BML-24564 3D printer – Bambu Lab A1 mini
1. Usage Information and Warnings
a. Do not touch the nozzle or heated bed while the printer is operating to avoid burns and bodily injury caused by high temperatures.
b. Do not place the printer near heat sources or flammable or explosive materials. It is suggested to place it in a well-ventilated, cool, and dust-free place.
c. Do not wear gloves or wraps while operating the device to prevent entanglement with moving parts, which could cause crushing and cutting of body parts.
d. Be careful of the high-speed moving parts of the device to avoid potential risk of entrapment. e. Children under the age of 10 should not use the printer without supervision, as it may cause
bodily injury. f. Perform regular maintenance on the printer, cleaning the device body with a dry cloth to
remove dust and any sticky filament residue. Before cleaning, make sure the printer is turned off and fully cooled. g. To ensure safe operation of the device, make sure it is properly grounded. Improper grounding or potential negligence may increase the risk of electric leakage. h. Do not expose the printer to sudden vibrations or other adverse conditions, as this may result in poor print quality. i. If the device will not be used for a long time, turn off the power and disconnect the power cord.
2. Unpacking and Assembly
a. Unpacking checking the completeness of the set and the condition of the elements. b. Wiring connecting the device to the power supply. c. Startup and Calibration checking the operation of the printer and its calibration. d. Test Print loading the filament and performing a test print.
3. Intended Use
The product is intended to be used within the parameter ranges provided by the manufacturer and should only be used by qualified personnel trained to operate this product. Before each use, check the product for damage and do not use it if any defects are found. Failure to follow the manufacturer’s guidelines may cause potential damage to the product.
4. Technical Specification
Product Code EAN13 Weight:
BML-24564 6975337036173 8.200000 kg
Dimensions 3D – print surface 3D – type of printout 3D – hotend amount 3D – filament diameter 3D – printing speed 3D – nozzle temp 3D – table temp. Pole robocze Wymiary pola roboczego – o X Wymiary pola roboczego – o Y Wymiary pola roboczego – o Z Plug&Play 3D – Grzana komora 3D – Kamera 3D – Obsluga wielu materialów 3D – Obslugiwane materialy 3D – Komunikacja 3D – Komunikacja 3D – Komunikacja 3D – Komunikacja
Width:39, Height:44, Depth:46 cm 180x180x180 mm FFF/FDM 1 1.75 mm 500 mm/s 300 °C 80 °C Male 180 mm 180 mm 180 mm Tak Nie Tak Nie Podstawowe WiFi Karta microSD Ethernet Bluetooth
5. Contact Information
For product-related questions, please contact an authorized service center or the manufacturer:
Importer: Botland. B. Derkacz Sp. K. Address: Gola 25, 63-640 Bralin Phone Number: 62 593 10 54 Website address: www.botland.store
Powered by TCPDF (www.tcpdf.org)
Documents / Resources
 |
Bambu Lab BML-24564 3D Printer [pdf] User Manual BML-24564 3D Printer, BML-24564, 3D Printer, Printer |