babyletto M27902 Swell Changing Table User Guide

Assembly Instructions
Refer to the parts list provided and follow the step-by-step assembly instructions in the manual. Make sure to use the correct hardware and follow the sequence of steps for proper assembly.

Safety Precautions
Ensure that all connections are secure and tight during assembly. Test the locking mechanisms before use. Always follow the safety guidelines provided in the manual to prevent accidents.

Installation of Anti-Tip Kit
To prevent furniture tip-over, install the anti-tip kit provided with the dresser. Follow the detailed instructions to attach the kit securely to the wall. Make sure to choose the appropriate attachment method based on your wall material (wood stud or wall stud)

hey there,
It’s time to bring that dream nursery to life with babyletto.

We are here to help with all the tools and resources you need to design a space that feels like you.

Our babyletto community is important to us so we’re always sharing styling tips, ideas to try, and unique inspiration.
Share your style with us at #babyletto

Welcome to the babyletto family+

FAQ

Q: What should I do if I encounter missing parts during assembly?
A: In case of missing parts, please contact babyletto customer support at 323-282-5163 or visit BABYLETTO.COM/SUPPORT for assistance.
Q: How often should I check the dresser for stability?
A: It is recommended to periodically check all connections and hardware to ensure the dresser remains stable. Regularly inspect the anti-tip kit for proper installation.

Getting started

If you need help or have questions, please let us know!

Parts

Not to scale

Hardware

Actual size

Assembly instructions

Children have died from furniture tipover. To reduce the risk of furniture tipover,
ALWAYS install tip over restraint provided.

Every detail of this dresser, including drawer extension, has been thoughtfully constructed in accordance with CPSC’s ASTM F2507-23 standard to reduce tip-over risk.

Hardware
actual size

Find your wall material and follow steps to attach the anti-tip kit to your wall.
Drywall or plaster with available wood stud:

Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser, positioned over a wood stud.

Drill 1/8-inch (3 mm) diameter pilot hole into the wood stud, on the pencil mark.
Following the appropriate picto-gram instructions on the following pages, drive the screw with washer through the textile strap and tighten screw firmly into the wood.

Drywall without available wood stud

Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser.
Drill 3/8-inch (9 mm) diameter hole through the wall, on the pencil mark.
Drive the plastic anchor into the hole, using a hammer if needed.
Following the appropriate picto-gram instructions on the following pages, drive the screw with washer through the textile strap and tighten screw firmly into the plastic anchor in the wall. Do not over-tighten.

If your wall material is not listed here, or if you have any questions, consult your local hardware store.

15b
Mark spot on wall 1-2” (25-50mm) below the top of the dresser.

15c
Follow the “Find Your Wall Material” instructions on the previous page. Drill a 3/8″ (9 mm) hole and insert plastic anchor into hole (If needed).

15d
Fasten strap/bracket by screwing into plastic anchor or wood stud.

Storage

Because materials respond to temperature and humidity, it is important to store furniture in controlled environments. Furniture should not be placed in direct sunlight or near air-conditioning outlets, radiators, heaters, or humidifiers. Any changes such as extreme heat or cold, dampness, or dryness, may cause noticeable shrinkage or swelling of wood. Direct sunlight may affect the coloring of materials over time.

Care and cleaning

To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use abrasive chemicals or materials. For fabrics, we recommend using a non-toxic foaming fabric cleaner or leather cleaner where appropriate. Touch up kits are available for purchase by contacting us at: 323-282-5163 or INFO@MDBMAIL.COM

Registration
Re˜isterin˜ your product is simple. You can do so at: BABYLETTO.COM/REGISTRATIONS

Part replacement
If you would like to order replacement or missing parts, please visit us at: BABYLETTO.COM/PARTS

or you can contact us by mail at:
8700 REX RD. P ICO RIVERA, CA 90660

One year limited warranty
Oops! Did we make a mistake? No worries, your Babyletto product is covered under warranty for one year after the date of purchase. For more details on our warranty policy, please visit:
BABYLETTO.COM/WARRANTY

WARNING

BEFORE USE

Read all instructions before use of the changing table.
Keep instructions for future use.

Do not use changing table if it is damaged or broken.
If a means of attachment to the contoured changing pad or add-on changing unit is provided, the instructional literature shall provide instructions on how to secure the contoured changing pad or add-on changing unit to the support surface.
This product is not intended to be used as a changing table without adult supervision. Use of the product without this may result in death or serious injury to your child from falling. Follow all instructions on attaching and using the changing table.

Recommended maximum weight of the occupant for which the changing table, add-on changing unit, or contoured changing pad is 30 lb (13.6 kg).

SUFFOCATION HAZARD
Babies have suffocated while sleeping on changing areas: changing area is not designed for safe sleep. NEVER allow baby to sleep on changing area.

FALL HAZARD

Children have suffered serious injuries after falling from changing areas. Falls can happen quickly.
STAY in arm’s reach of your child.
ALWAYS secure this pad to the support surface by using the provided hardware. See instructions.

Documents / Resources

babyletto M27902 Swell Changing Table [pdf] User Guide
M27902 Swell Changing Table, M27902, Swell Changing Table, Changing Table, Table

References

User Manual

babyletto M27902 Swell Changing Table

Product Usage Instructions