WGX980TN
8Ω
Line Array Sources – 1.4 Inches
User Manual
- Line Array optimized Waveguide with DE980TN driver
- 120° max horizontal coverage
- 220 W continuous program power capacity
- 75 mm (3 in) CCAW voice coil
- Titanium diaphragm
- 500 – 18000 Hz response
- 108.5 dB sensitivity
- Neodymium magnet assembly with shorting copper cap
Waveguide horns are not sold separately
SPECIFICATIONS
| Horizontal Coverage Active Radiating Factor1 Recommended Crossover Waveguide Material Nominal Impedance Minimum Impedance2 Nominal Power Handling3 Continuous Power Handling4 Sensitivity5 Frequency Range Voice Coil Diameter Winding Material Diaphragm Material Flux Density Magnet Material |
120 ° Max 93.7 % 0.8 kHz Cast Aluminium 8 Ω 8.0 Ω 110 W 220 W 108.5 dB 1.0 – 18.0 kHz 75 mm (3.0 in) CCA Titanium 2.05 T neodymium Ring |
MOUNTING AND SHIPPING INFO
| Exit Size Driver Diameter Dimensions Net Weight Shipping Units Shipping Weight Shipping Box |
153×25 mm (6×1 in) 131 mm (5.16 in) 163x130x235 mm (6.4×5.1×9.3 in) 3.3 kg (7.28 lb) 1 3.4 kg (7.5 lb) 245x140x175 mm (9.6×5.5×6.9 in) |
- 12 dB/Oct. Or higher slope high-pass filter.
- 2-hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Waveguide mounted on 90°x10° bell horn
B&C Speakers s.p.a.
Via Poggiomoro, 1 – Loc. Vallina, 50012 Bagno a Ripoli (FI) – ITALY – Tel. +39 055 65721 – Fax +39 055 6572312 –
mail@bcspeakers.com
Documents / Resources
 |
B C SPEAKERS WGX980TN 1.4 Inches Line Array Sources [pdf] User Manual WGX980TN 1.4 Inches Line Array Sources, WGX980TN, 1.4 Inches Line Array Sources, Line Array Sources, Array Sources, Sources |
