AzureWave LogoAW-CU544 IEEE 802.11 b-g-n MAC-Baseband Radio and Bluetooth 5.2 IoT Module
User Guide
Rev. A
(For Standard)

AW-CU544 IEEE 802.11 b-g-n MAC-Baseband Radio and Bluetooth 5.2 IoT Module

The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
Revision History

Version Revision Date Description  Initials  Approved 
A 11/6/2022 • Initial Version Steven Jian Chihhao Liao

Reference Schematic

Values (ex. capacitance, inductance, etc.) in the reference schematic are for reference only

AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 2AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 1AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 3

Design Considerations

2.1 Power Supply
Keep noise sensitive power rail VDDA from other power/signal nets

AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 4

DO NOT use Coin Cells for WLAN_VBAT rail. They are designed for low power device (<10mA), whereas the CYW43438 can consume up to 300mA average current

AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 5

2.2 CapSense
Recommend use Port 8 (see Table 2) for its low self-capacitance inside the module

AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 6

Every CapSense controller pin has some parasitic capacitance associated with it, adding an external resistor closed to the module (560 Ω for Self-capacitance and 2 kΩ for Mutual-capacitance) forms a low-pass RC filter that attenuates the RF noise amplitude coupled to the pin.

AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 7

The simulation example below shows the mutual capacitance with different finger/sensor distance. Please evaluate your application and the capacitance requirement of the sensor provided by Infineon (refer to AN85951 – PSoC® 4 and PSoC® 6 MCU CapSense® Design Guide) along with our module pin parasitic capacitance shown in 2.4 P Pin parasitic capacitance to decide which sensing method suits your needs.

AzureWave AW CU544 IEEE 802.11 b g n MAC Baseband Radio and Bluetooth 5.2 IoT Module - Figure 8

2.3 Debug Pins
Please leave the debug pins floating

Table 1
Pin No  Definition  Basic Description 
D5 BT_REG_ON Reserved for debug use only
B1 BT_UART_CTS Reserved for debug use only
D2 BT_UART_RTS Reserved for debug use only
C2 BT_UART_RXD Reserved for debug use only
B2 BT_UART_TXD Reserved for debug use only
H4 SDIO_CLK_TP Floating Pin, No connect to anything.
G5 SDIO_CMD_TP Floating Pin, No connect to anything.
H5 SDIO_DATA0_TP Floating Pin, No connect to anything.
G4 SDIO_DATA1_TP Floating Pin, No connect to anything.
H7 SDIO_DATA2_TP Floating Pin, No connect to anything.
H6 SDIO_DATA3_TP Floating Pin, No connect to anything.
D6 WL_GPIO1 Reserved for debug use only
E6 WL_GPIO2 Reserved for debug use only
C1 WL_REG_ON Reserved for debug use only

2.4 P Pin parasitic capacitance

Table 2
Pin No.  Definition  Parasitic capacitance (pF)  Pin No.  Definition  Parasitic capacitance (pF) 
K6 P0_2 1 E4 P5_2 1.4
J7 P0_3 1.1 F5 P5_3 1.1
K7 P0_4 0.9 D4 P5_4 1.9
J6 P0_5 0.8 B5 P5_5 2.4
M2 P1_0 1.2 B4 P5_6 2.3
M3 P1_1 0.9 C5 P5_7 2.2
K3 P1_2 1.1 F7 P6_0 1
L3 P1_3 0.8 E7 P6_1 1.2
L2 P1_4 0.9 E8 P6_2 1.3
J3 P1_5 1 G8 P6_3 0.9
R7 P10_0 1.1 F8 P6_4 0.9
R6 P10_1 1 E9 P6_5 1.2
P7 P10_2 0.9 E10 P6_6 1.3
L6 P10_3 0.9 D10 P6_7 1.5
N7 P10_4 0.8 F10 P7_0 1.2
M7 P10_5 0.7 H9 P7_3 0.6
M6 P10_6 0.7 G9 P7_4 1
R4 P11_0 1.4 G10 P7_5 1.3
L4 P11_1 1.2 J10 P8_0 0.7
R5 P11_2 1 K9 P8_1 0.5
N6 P11_3 0.7 L8 P8_2 0.4
M4 P11_4 1.1 K10 P8_3 0.7
P4 P11_5 1.1 L9 P8_4 0.4
P5 P11_6 0.9 M8 P8_5 0.6
M5 P11_7 0.8 L10 P8_6 0.6
R2 P12_0 1.5 M9 P8_7 0.5
R1 P12_1 1.8 P9 P9_0 0.9
N1 P12_2 1.7 N9 P9_1 0.7
P1 P12_3 1.6 M10 P9_2 0.6
P2 P12_4 1.5 N8 P9_3 0.8
N2 P12_5 1.3 P10 P9_4 0.9
C4 P5_0 2.2 N10 P9_5 0.7
F4 P5_1 1.3 R10 P9_6 1.1

AzureWave Logo

Documents / Resources

AzureWave AW-CU544 IEEE 802.11 b-g-n MAC-Baseband Radio and Bluetooth 5.2 IoT Module [pdf] User Guide
AW-CU544 IEEE 802.11 b-g-n MAC-Baseband Radio and Bluetooth 5.2 IoT Module, AW-CU544, IEEE 802.11 b-g-n MAC-Baseband Radio and Bluetooth 5.2 IoT Module, Radio and Bluetooth 5.2 IoT Module, Bluetooth 5.2 IoT Module, 5.2 IoT Module, IoT Module, Module

References

Leave a comment

Your email address will not be published. Required fields are marked *