Elitech Glog 5 Real Time Single Use IoT Data Logger

Məhsul təqdimatı

1. Back mounted hanging hole
2. LCD displey ekran
3. LED göstərici işığı
4. Start stop button
5. Seriya nömrəsi
6. İşıq sensoru
7. Power supply+data interface
8. Daxili sensorlar
9. Activate/Flight Mode Button
10. Xarici sensor

LCD displey

1. İş statusu
2. Funksiya təsviri
3. Uçuş rejimi
4. Siqnal vəziyyəti
5. Batareya səviyyəsi
6. İşıq və vibrasiya siqnalları
7. Time and number of records
8. Temperature and humidity values

Qeyd: To ensure data reliability, please do not enable recording when the battery level is less than or equal to 20% ( between 10% and 20%)

Seçim cədvəli

(standart işıq və vibrasiya sensorları)

 

Model	Prob növü	Ölçmə diapazonu	Dəqiqlik
Glog 5 T	Built in temperature	-30℃~70℃	±0.5℃
Glog 5 TH	Built in temperature and humidity	-30℃~70℃ 0%RH~100%RH	±0.5℃ ±% 5 RH
Glog 5 TE	External temperature+internal temperature	-40℃~85℃	±0.5℃
Glog 5 THE	External temperature and humidity+internal temperature	External: -40℃~85℃ 0%RH~100%RH built-in: -30℃~70℃	±0.5℃ ±% 5 RH
Glog 5 TLE	External ultra-low temperature+internal temperature	External: -200℃~150℃ built-in: -30℃~70℃	±0.5℃(-40℃~85℃) ±1℃(-100℃~150℃) ± 2 ℃ (other)
Glog 5 CO₂	External ul-CO₂ & temperature & humidity built-in temperature	-30℃~70℃ 0%RH~100%RH 0%~100vol%	±0.5℃ ±% 5 RH 1vol%+3vol% measured

Texniki parametr

Vibrasiya diapazonu	0-16 q
Range of illumination intensity	0 ~ 52000Lux
Həlledici güc	0.1°C/0.1%RH/0.1q/1Lüks
Açar	İki düyməli dizayn
Göstərici işığı	Qırmızı və yaşıl, qırmızı və mavi LED göstərici işıqları
Ekran	Broken code display screen
Yerləşdirmə üsulu	LBS+GPS (optional)
Saxlama tutumu	60000 (pre shadow data) 32000 (normal recording+rear shadow data)
Kölgə məlumatları	Ön+Arxa
Qeyd aralığı	1min~24h; Default: 5 minutes
Yükləmə intervalı	1min~24h adjustable Default: 60 minutes
Məlumat yükləmə üsulu	4G+2G
Freight initiation method	Button, platform, timer
Freight stopping method	Button, platform, full memory
Repeat startup	3 times (within the shelf life)
Uçuş rejimi	Button, timer, electronic fence
Siqnal rejimi	Overlimit and low battery
Batareya növü	3.0V disposable lithium manganese battery 4800mAh (CR14505 3B6H)
OTA yükseltme	Upgrades can be made through data management software and platforms
Suya davamlı dərəcəli	IP65 (daxili)
İş mühiti	-30 ℃~70℃, 0% RH~100% RH (non condensing)
Saxlama mühiti	15~30℃，20~75%RH
Spesifikasiya və ölçü	103 x 61.3 x 30 (mm)
Batareyanın ömrü	Record once every 5 minutes in a 25 ℃ environment, upload every 30 minutes, and use the temperature and humidity recorder for a total of 60 days;
Raf ömrü	(Usage time+Storage time) 1 year

Texniki parametr

Cihaz əlavə edin
Giriş platforması websayt: http://www.i-elitech.com, or scan the code to download and install the APP . Register, log in, and add devices according to the prompts.

Aktivləşdirmə

basın və saxlayın button for 5s, and the screen will display normally, indicating that the device has been activated.

Qeyd: Clicking on the button and the screen displaying normally indicates that the device has been activated;

Yazmağa başlayın
basın və saxlayın button for 5s, and the screen will display a symbol, indicating successful startup recording; If theindicator flashes, it will enter a delayed countdown state, and after the delay ends, it will automatically start recording;

Yazmağı dayandırın

basın və saxlayın button for 5s, and the screen will display a sign indicating that the recording has been successfully stopped;

Məlumat ixracı

The device is connected to the computer USB interface through a data cable and will automatically generate PDF+CSV format data reports. You can copy the generated report to your computer for saving.

Qeyd: The keys are invalid during the data export process

Uçuş rejimi

• Aktivləşdirin: basın və saxlayın button for 5s, and the screen will display a symbol indicating that the airplane mode has been successfully activated;
• Bağlayın: basın və saxlayın button for 5s. If the screen icon disappears, it indicates that the airplane mode has been turned off;

Qeyd: To enable and disable other flight modes, please operate through the platform or app.

Freight Management Operation Instructions

1. After logging into the platform or app, click on the ‘Freight Management’ menu in the main menu;
2. Click on the ‘Configuration’ menu on the homepage, and sequentially create and add ‘User Management’, ‘Carrier’, ‘Location’, ‘Alarm Presets’, and’ Freight Template ‘;
3. Click on the ‘Freight Management’ menu on the homepage to create and manage freight;

Qeyd: For detailed operation manuals, please refer to the operating instructions on the platform or APP;

LED göstərici işığının təsviri

LCD displey təlimatları

Təhlükəsizlik təlimatları və ehtiyat tədbirləri

Təhlükəsizlik təlimatları

• Bu məhsulu düzgün quraşdırdığınızdan və istifadə etdiyinizdən əmin olmaq üçün aşağıdakı şərtləri oxuyun və onlara ciddi şəkildə əməl edin:

Batareya

• Please use the original battery and do not use other batteries to prevent damage to the equipment or other malfunctions. Do not disassemble, squeeze, hit, or heat the battery privately, and do not place it in a fire, otherwise it may cause battery explosion and fire.

Avadanlıq

• Do not use this equipment in flammable and explosive gas environments, otherwise it may cause explosions or fires. During the use of the equipment, if the equipment emits a burnt or other odor, the power supply should be immediately cut off and the manufacturer or supplier should be contacted in a timely manner.

Precautions and maintenance requirements

• If the equipment is not used for a long time, it should be removed and stored in a dry and cool environment in the packaging box.
• Users are not allowed to make any unauthorized changes to this device. Any unauthorized changes may affect the accuracy of the device or even damage it.
• Do not place the device outdoors for use to avoid instrument short circuits, burns, and other malfunctions caused by adverse weather conditions such as rain and lightning.
• When the recorder is offline (no data upload), please confirm the networking status of the device;
• Zəhmət olmasa qeyd cihazının ölçmə diapazonunda istifadə edin
• Please do not forcefully impact this recorder
• Sensors should be calibrated regularly to ensure their accuracy meets usage requirements
• The measured values of the recorder may be affected by the following factors:

Temperatur xətası:
The stable time in the measurement environment is too short; Close to heat sources, cold sources, or directly exposed to sunlight.

Humidity error
The stable time in the measurement environment is too short; Long term exposure to steam, water mist, water curtains, or condensation environments.

Çirklənmiş
Tozlu və ya digər çirklənmiş mühitdə olmaq

• If the sensor is found to be blocked or contaminated, it should be wiped with a dust-free cloth dipped in clean water. It is strictly prohibited to use high molecular weight chemical solvents such as alcohol for wiping.
• If scrapped, it must be strictly handled in accordance with the “Regulations on the Management of Recycling and Disposal of Waste Electrical and Electronic Products”.

Tez-tez verilən suallar

What should I do if the battery level is less than 20%?

To ensure data reliability, do not enable recording when the battery level is less than or equal to 20%.

How do I know if the device is activated?

Clicking on the activation button and seeing the screen display normally indicates that the device has been activated.

How can I export data from the device?

Connect the device to the computer via USB to generate PDF+CSV format data reports automatically.

Sənədlər / Resurslar

Elitech Glog 5 Real Time Single Use IoT Data Logger [pdf] İstifadəçi Təlimatı Glog 5 T, Glog 5 TH, Glog 5 TE, Glog 5 THE, Glog 5 TLE, Glog 5 CO, Glog 5 Real Time Single Use IoT Data Logger, Glog 5, Real Time Single Use IoT Data Logger, Single Use IoT Data Logger, Data Logger, Logger

İstinadlar

• İstifadəçi təlimatı