Giriş
This manual provides detailed instructions for the safe and effective use of your Apace Vision LED Safety Lights and Guard G3X Tail Light. These products are designed to enhance visibility and safety during various activities such as cycling, running, and walking. Please read this manual thoroughly before first use and retain it for future reference.
Təhlükəsizlik Məlumatı
- Always ensure lights are securely attached before use.
- Do not look directly into the LED lights to avoid eye strain.
- Uşaqların əli çatmayan yerdə saxlayın.
- Batareyaları yerli qaydalara uyğun olaraq məsuliyyətlə atın.
- While these lights enhance visibility, they do not replace the need for caution and adherence to traffic laws.
Paketin məzmunu
Bütün əşyaların paketinizdə olduğunu yoxlayın:
- 2x LED Təhlükəsizlik İşıqları
- 1x Guard G3X Tail Light (or Guard G3X Pro 100)
- Extra Batteries (for LED Safety Lights)
- Straps (2 Short, 1 Long)
- 1x Mini Tornavida
- USB Charging Cable (for Guard G3X Tail Light)
- Mounting O-rings (for Guard G3X Tail Light)
- İstifadəçi təlimatı
Image: Contents of the Apace Vision LED Safety Lights package.
Image: Contents of the Apace Vision Guard G3X Pro 100 Tail Light package.
Quraşdırma və Quraşdırma
For LED Safety Lights:
- Batareyanın quraşdırılması: Use the provided mini-screwdriver to open the battery compartment. Insert the included batteries, ensuring correct polarity. Close the compartment securely.
- Qoşma: These lights feature a clip-on design. Securely attach them to your belt, pockets, running gear, helmet, backpack, reflective vest, dog collars/leashes, or smartphone armband. For bike use, utilize the provided straps to fasten them to handlebars or seat posts.
Image: LED Safety Lights in use, demonstrating attachment to clothing.
For Guard G3X Tail Light:
- Montaj: Use the provided rubber O-rings to securely attach the tail light to your bicycle's seat post or frame. Ensure the light is facing backward and is stable.
Image: Guard G3X Tail Light mounted on a bicycle.
Əməliyyat Təlimatları
General Operation (Both Lights):
- Yandırma/Söndürmə: To turn the unit on or off, BASIB SAXLAYIN the power button for 3 seconds. A short press will not activate or deactivate the device.
- Dəyişiklik rejimləri: Once the light is on, press the power button briefly to cycle through the available lighting modes.
LED Safety Lights Modes:
These lights offer 3 powerful lights per device and 3 eye-catching lighting modes:
- Sabit
- Yavaş Yanıb-sönən
- Sürətli Flaş
Some models may also feature multiple color options (red, green, blue) and multicolor strobe modes.
Image: Available lighting modes for LED Safety Lights.
Guard G3X Tail Light Modes:
The Guard G3X Tail Light (including Pro 100 version) typically offers various steady and flashing modes designed for maximum rear visibility. Refer to the specific product packaging or quick start guide for a detailed list of modes for your model.
Image: Guard G3X Pro 100 Tail Light in use, showing 100 Lumen output.
Charging (Guard G3X Tail Light)
The Guard G3X Tail Light is USB rechargeable. When the battery is low, connect the light to a standard USB port using the provided USB charging cable. A charging indicator light will typically show red while charging and turn green or off when fully charged. Charging time may vary.
Baxım
- Təmizləmə: İşıqları yumşaq bir parça ilə silin, damp parça. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
- Yaddaş: İstifadə edilmədikdə işıqları sərin, quru yerdə saxlayın.
- Battery Replacement (LED Safety Lights): Replace batteries as needed. Ensure to use the correct battery type (e.g., CR2032) and dispose of old batteries properly.
- Suya davamlılıq: Both lights feature robust, weather-resistant casing (Guard G3X Pro 100 is IPX5 rated). While designed to withstand rain, avoid submerging them in water.
Problemlərin aradan qaldırılması
- İşıq yanmır:
- Ensure the power button is HELD DOWN for 3 seconds aktivləşdirmək.
- Check batteries for LED Safety Lights; replace if necessary.
- Charge the Guard G3X Tail Light if the battery is depleted.
- İşıq titrəyir və ya zəifləyir:
- Replace batteries (LED Safety Lights) or recharge (Guard G3X Tail Light).
- Light not attaching securely:
- Ensure clips or straps are properly engaged and tightened.
- Inspect straps/O-rings for wear and tear; replace if damaged.
Spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Brend | Apace Vision |
| Material | plastik |
| Power Source (LED Safety Lights) | Battery Powered (CR2032) |
| Power Source (Guard G3X Tail Light) | Yenidən doldurulan batareya (USB) |
| Suya davamlılıq səviyyəsi | Weatherproof (Guard G3X Pro 100: IPX5) |
| Parametrlərin sayı | 3+ (Varies by model) |
| Brightness (Guard G3X Pro 100) | 100 lümen |
| Battery Life (LED Safety Lights) | 100 saata qədər |
| Battery Life (Guard G3X Pro 100) | 45 saata qədər |
Zəmanət və Dəstək
Apace Vision products are designed for durability and performance. Your purchase is typically covered by a 30-day return policy and a 1-year warranty against manufacturing defects. For detailed warranty information, product support, or to contact customer service, please visit the official Apace Vision store or websayt:
