Teamgee H3 DIY Electric Skateboard Kit Instruction Manual

1. Giriş

Thank you for choosing the Teamgee H3 DIY Electric Skateboard Kit. This kit is designed to transform your standard skateboard into a powerful electric skateboard, offering an exciting and convenient riding experience. The H3 kit features a 480W motor, a top speed of 16 MPH, a range of up to 9.3 miles, and four adjustable speed modes to suit various riding preferences and skill levels. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

Image: The Teamgee H3 DIY Electric Skateboard Kit seamlessly integrated onto a skateboard deck, showcasing its compact design and readiness for electric propulsion.

2. Mühüm təhlükəsizlik xəbərdarlıqları

Riding an electric skateboard carries inherent risks. To minimize these risks and ensure your safety, please adhere to the following guidelines:

• Always wear a helmet and appropriate protective gear, including knee pads, elbow pads, and wrist guards.
• Familiarize yourself with and obey all local traffic laws and regulations regarding electric skateboards.
• Do not ride in wet conditions, on slippery surfaces, or on uneven terrain.
• Ensure the battery is adequately charged before each ride.
• Perform a pre-ride inspection: check all connections, ensure wheels are securely attached, and verify brake functionality.
• Ride within your skill level and be aware of your surroundings. Avoid riding in heavy traffic or crowded areas.
• Do not attempt to modify the kit or its components, as this may compromise safety and void the warranty.
• The maximum load capacity is 160 pounds. Do not exceed this limit.

3. Paketin məzmunu

Zəhmət olmasa, aşağıda sadalanan bütün əşyaların paketinizə daxil olduğunu yoxlayın:

• Teamgee H3 Electric Skateboard Module (with integrated motor wheel and battery enclosure)
• Front Truck Assembly with Wheels
• Simsiz Uzaqdan İdarəetmə
• Enerji Adapteri (zaryadıcı)
• Doldurma kabeli
• Skateboard T-Tool
• İstifadəçi Təlimatı (bu sənəd)

Image: A complete overview of the Teamgee H3 DIY Electric Skateboard Kit components, laid out for easy identification.

4. Quraşdırma və Quraşdırma

The Teamgee H3 kit is designed for flexible installation on various standard skateboard decks. Follow these steps to convert your skateboard:

1. Prepare Your Skateboard Deck: Ensure your skateboard deck is clean and free from any obstructions.
2. Remove Existing Trucks: Using the provided T-tool or a suitable wrench, carefully remove both the front and rear trucks from your skateboard deck.
3. Install the Electric Module (Rear): Position the Teamgee H3 electric skateboard module at the rear of your deck, aligning the mounting holes. Secure it using the provided hardware. Note: Some installations may require drilling an additional hole for the battery pack for optimal stability.
4. Install the Front Truck: Attach the new front truck assembly to the front of your skateboard deck, aligning the mounting holes and securing it with the provided hardware.
5. Bütün komponentləri qoruyun: Double-check that all screws and nuts are tightened securely. Ensure there is no wobble or looseness in either truck assembly.
6. İlkin Doldurma: Before your first ride, fully charge the electric module using the provided power adapter and charging cable. The power indicator lights on the module will show the charging status.

Image: Visual guide illustrating the simple process of integrating the H3 kit with a standard skateboard deck to create an electric skateboard.

Image: The H3 kit shown on different types and sizes of skateboard decks, highlighting its universal compatibility.

5. Əməliyyat Təlimatları

Once installed and charged, your Teamgee H3 electric skateboard is ready for use. Familiarize yourself with the remote control functions:

• Yandırma/Söndürmə: Press and hold the power button on the remote and the skateboard module to turn them on/off. Ensure they are paired before riding.
• Sürətlənmə: Push the throttle lever forward to accelerate.
• Əyləc: Pull the throttle lever backward to engage the brakes. Apply brakes smoothly to avoid sudden stops.
• Sürət rejimi: The remote allows you to switch between four speed modes:
• Beginner (L): 5-10 km/h (3-6 MPH) - Ideal for new riders.
• Progressive (M): 10-15 km/h (6-9 MPH) - For intermediate riders.
• High-speed (H): 15-25 km/h (9-16 MPH) - For experienced riders.
• Sport Mode (H+): 15-25 km/h (9-16 MPH) - Provides maximum torque and responsiveness.
• İrəli/geri: Use the designated switch on the remote to change direction.
• Batareya göstəricisi: The remote control features a battery indicator to show the remaining charge of both the remote and the skateboard module.

Şəkil: Ətraflı view of the remote control, highlighting its various functions including speed adjustment, acceleration, braking, and battery indicators.

6. Baxım

Regular maintenance will extend the lifespan of your Teamgee H3 kit:

• Batareyaya qulluq: Charge the battery regularly, even if not in use, to maintain its health. Avoid completely draining the battery or overcharging it. Store in a cool, dry place.
• Təmizləmə: Wipe down the electric module and wheels with a damp cloth after use. Avoid using harsh chemicals or excessive water.
• Təkər və Yastıq Təftişi: Periodically check the wheels for wear and tear. Inspect bearings for smooth rotation and clean or replace them if necessary.
• Avadanlığı sıxın: Regularly check and tighten all screws and nuts on the trucks and module to ensure they remain secure.

7. Giderme

If you encounter issues with your Teamgee H3 kit, refer to the following common problems and solutions:

If the issue persists after attempting these solutions, please contact Teamgee customer support for further assistance.

8. Spesifikasiyalar

Key technical specifications for the Teamgee H3 DIY Electric Skateboard Kit:

• Motor Gücü: 480W DC Brushless Motor
• Ən yüksək sürət: Up to 16 MPH (25 km/h)
• Maksimum sıra: 9.3 milə (15 km) qədər
• Batareya: 36V, 2.6Ah, 93.6Wh High Energy Power Cells
• Doldurma vaxtı: 1-2 saat
• Maksimum yük tutumu: 160 funt sterlinq
• Dırmanma bucağı: 15%-ə qədər
• Təkər Ölçüsü: 90 mm
• Təkər materialı: Highly Flexible Polyurethane (PU)
• Truck Material: 6.5" High Strength Aluminium-Magnesium Alloy
• Rulmanlar: HCH 608RS ABEC-11
• Maddə çəkisi: 9.9 Pounds (kit only)

Şəkil: ətraflı view of the powerful 480W DC Brushless Motor, highlighting its robust design and 15% climbing angle capability.

Şəkil: partladı view of the H3 module, detailing its internal components such as the PU driven wheels, aluminum-magnesium alloy trucks, switching key, charging port, and power indicator.

9. Zəmanət və Dəstək

For information regarding the product warranty, returns, or technical support, please refer to the official Teamgee websaytına daxil olun və ya birbaşa müştəri xidmətləri ilə əlaqə saxlayın. Satınalma qəbzinizi hər hansı zəmanət iddiaları üçün satınalmanın sübutu kimi saxlayın.

Websayt: www.teamgee.com

E-poçt: support@teamgee.com