1. artıqview
The JBL Professional AM5212/95 is a high-performance, medium-power 12-inch, 2-way full-range loudspeaker system designed for various professional audio applications. This system incorporates advanced JBL technologies to deliver clear and powerful sound reproduction.
Əsas xüsusiyyətlərə aşağıdakılar daxildir:
- JBL Differential Drive® Low-Frequency Driver (262H) with 50.8 mm (2-inch) dual voice coil and dual magnetic gap.
- High-Frequency Compression Driver (2408H-1) with 38mm (1.5-inch) exit and 38mm (1.5-inch) voice-coil.
- 90° x 50° rotatable Progressive Transition™ waveguide for optimized coverage.
- Switchable Bi-Amp/Passive operation modes for flexible system integration.
- Durable enclosure with a white finish.
2. Təhlükəsizlik Məlumatı
Please read and understand all safety instructions before installing or operating this loudspeaker system. Retain this manual for future reference.
- Güc mənbəyi: Connect the loudspeaker only to the type of power source indicated in the specifications or on the product.
- Havalandırma: Düzgün havalandırma təmin edin. Heç bir ventilyasiya açılışını bağlamayın.
- İstilik: Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Su və nəm: Bu cihazı yağışa və ya nəmə məruz qoymayın. Su yaxınlığında istifadə etməyin.
- Təmizləmə: Yalnız quru parça ilə təmizləyin.
- Xidmət: Bu məhsula özünüz xidmət göstərməyə çalışmayın. Bütün xidmətlər üçün ixtisaslı xidmət personalına müraciət edin.
- Montaj: If suspending the loudspeaker, ensure that all mounting hardware and structures are rated for the weight of the loudspeaker and installed by qualified personnel. Suspension eyebolts are not included and must be sourced separately.
- Eşitmə Qorunması: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use caution when operating at high volumes.
3. Quraşdırma
3.1 Paketin məzmunu
Paketinizə aşağıdakı əşyaların daxil olduğundan əmin olun:
- JBL Professional AM5212/95 Loudspeaker System
- Təlimat kitabçası (bu sənəd)
Note: Suspension eyebolts are not included. The optional U-bracket model MTU-3 is sold separately.
3.2 Quraşdırma və Yerləşdirmə
The AM5212/95 can be installed in various configurations, including pole-mounting, wall-mounting with an optional U-bracket (MTU-3), or suspension. Always ensure that mounting surfaces and hardware can safely support the loudspeaker's weight (55 pounds / 24.9 kg).
- Qütb Montaj: The loudspeaker features a standard pole-mount socket for use with compatible speaker stands.
- U-braket montajı: For wall or ceiling mounting, the optional JBL MTU-3 U-bracket can be used. Follow the instructions provided with the MTU-3 bracket for secure installation.
- Dayanma: The enclosure is equipped with multiple M10 threaded points for suspension. Use only certified M10 eyebolts and ensure proper rigging techniques are employed by qualified personnel.
3.3 Waveguide Rotation
The 90° x 50° Progressive Transition™ waveguide can be rotated to optimize coverage depending on the loudspeaker's orientation (horizontal or vertical). To rotate the waveguide:
- Ön barmaqlığı diqqətlə çıxarın.
- Unscrew the mounting screws securing the waveguide.
- Gently rotate the waveguide to the desired orientation.
- Securely fasten the waveguide with the mounting screws.
- Reattach the front grille.
3.4 Səs əlaqələri
The AM5212/95 offers both Bi-Amp and Passive operation modes. Select the appropriate mode based on your amplifier and system configuration.
- Passiv rejim: In passive mode, a single amplifier channel powers both the low-frequency and high-frequency drivers through the loudspeaker's internal crossover. Connect your amplifier output to the input connectors on the loudspeaker.
- İki-Amp Rejim: iki-amp mode, separate amplifier channels are used for the low-frequency and high-frequency drivers, requiring an external electronic crossover. Ensure the internal Bi-Amp/Passive switch is set to Bi-Amp. Connect the low-frequency amplifier output to the LF input and the high-frequency amplifier output to the HF input.
Always use high-quality speaker cables with appropriate gauge for the cable length and power requirements.
4. Əməliyyat Təlimatları
4.1 Yandırma və İlkin Quraşdırma
- Ensure all audio connections are secure and correctly configured for either Passive or Bi-Amp rejimi.
- Doğrulayın ki, sizin amplifier(s) are powered off and their volume controls are set to minimum.
- Power on your audio source (mixer, processor, etc.).
- Sizin gücünüz ampqaldırıcı(lar).
- Tədricən artırın amplifier volume to the desired listening level.
4.2 İkiAmp/Passive Mode Selection
Bi-Amp/Passive switch is located on the input panel of the loudspeaker. This switch determines how the internal crossover functions.
- Passiv: For single-amplifier channel operation with the internal crossover.
- İki-Amp: ikili üçün-amplifier channel operation with an external electronic crossover.
Həmişə təmin edin amplifier is powered off before changing this switch setting to prevent damage to the loudspeaker or ampömürlük.
5. Baxım
The JBL Professional AM5212/95 loudspeaker system requires minimal maintenance to ensure long-term performance.
- Təmizləmə: Use a soft, dry cloth to clean the exterior of the loudspeaker. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or components.
- Barmaqlıq: The front grille can be carefully removed for cleaning or waveguide rotation. Ensure it is reattached securely.
- Yoxlama: Periodically inspect all cables and connectors for signs of wear or damage. Replace any damaged components immediately.
- Yaddaş: If storing the loudspeaker for an extended period, keep it in a dry, temperature-controlled environment, protected from dust and physical impact.
6. Giderme
If you experience issues with your AM5212/95 loudspeaker, refer to the following common problems and solutions:
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Dinamikdən səs gəlmir |
|
|
| Təhrif edilmiş və ya aydın olmayan səs |
|
|
| Loudspeaker cuts out intermittently |
|
|
If the problem persists after attempting these solutions, please contact JBL Professional customer support or a qualified service technician.
7. Spesifikasiyalar
Detailed technical specifications for the JBL Professional AM5212/95 loudspeaker system:
| Xüsusiyyət | Detal |
|---|---|
| Model Adı | AM5212/95 |
| Dinamik növü | 2-Way Full-Range Loudspeaker |
| Aşağı Frekanslı Sürücü | 12-inch (305mm) 262H-1 Differential Drive® |
| Yüksək Frekanslı Sürücü | 2408H-1 Compression Driver (1.5-inch exit, 1.5-inch voice-coil) |
| Əhatə Nümunəsi | 90° x 50° (Rotatable Progressive Transition™ Waveguide) |
| Bağlantı texnologiyası | Simli |
| Əməliyyat rejimləri | İki-Amp / Passive Switchable |
| Rəng | Ağ |
| Maddə Çəkisi | 55 funt (24.9 kq) |
| Məhsul Ölçüləri | 19 x 15 x 30 düym (483 x 381 x 762 mm) |
| İstehsalçı | JBL Professional |
| Montaj növü | Magnetic Mount (referring to internal components, external mounting requires accessories) |
| Opsiyonel Aksesuarlar | MTU-3 U-bracket |
8. Zəmanət və Dəstək
JBL Professional products are designed for reliability and performance. This product is covered by a limited warranty. For specific warranty terms and conditions applicable to your region, please refer to the warranty card included with your product or visit the official JBL Professional websayt.
For technical support, service, or replacement parts, please contact your authorized JBL Professional dealer or distributor. You can also find additional resources and contact information on the official JBL Professional websayt:
