LILYGO® T-Energy-S3 ESP32-S3 Development Board User Manual

Giriş

This manual provides detailed instructions for the LILYGO® T-Energy-S3 ESP32-S3 Development Board. It covers product specifications, setup procedures, operating guidelines, maintenance tips, and troubleshooting information to help you effectively use your development board.

Məhsul Bitdiview

The LILYGO® T-Energy-S3 is a versatile development board featuring the ESP32-S3 chipset, designed for various IoT and embedded projects. It integrates Wi-Fi and Bluetooth 5 (LE) wireless connectivity, a 16MB Flash, 8MB PSRAM, and includes a charging chip with an 18650 battery holder for portable applications. The board supports multiple programming languages and platforms, making it suitable for both beginners and experienced developers.

Spesifikasiyalar

Paketin tərkibi:

• 1 x LILYGO® T-Energy-S3 Development Board
• 2 x 1*20p 2.54 Pin Headers

Quraşdırma

Before you begin, ensure you have the necessary development environment set up on your computer (e.g., Arduino IDE, VS Code with PlatformIO, or ESP-IDF).

Pinout diaqramı:

İlkin Bağlantı:

1. Install Pin Headers: Solder the provided 1*20p 2.54 pin headers to the board if you intend to use it on a breadboard or with jumper wires.
2. Enerji təchizatı:
   • USB-C: Connect the board to your computer using a USB-C cable. This will power the board and allow for programming.
   • 18650 Batareya: Insert a compatible 18650 battery into the battery holder on the back of the board. Ensure correct polarity; the board has reverse polarity protection. The charging chip will manage battery charging when connected via USB-C.
3. Sürücünün quraşdırılması: Your operating system may automatically install necessary USB-to-serial drivers. If not, you might need to manually install drivers for the USB-to-serial chip (often CP210x or CH340, though specific to the board's revision).
4. İnkişaf mühiti: Configure your chosen IDE (Arduino IDE, VS Code, ESP-IDF) to recognize the ESP32-S3 board. Refer to the official ESP-IDF documentation or LILYGO's GitHub for specific board support packages and setup guides.

Sample Code and Resources:

For reference code and further technical details, please visit the official LILYGO GitHub repository for the T-Energy-S3:

https://github.com/Xinyuan-LilyGO/T-Energy-S3

Əməliyyat Təlimatları

Programming the Board:

1. Qoşulun: Ensure the T-Energy-S3 board is connected to your computer via USB-C.
2. Select Board: In your IDE, select the appropriate ESP32-S3 board model.
3. Port seçin: Choose the correct serial port corresponding to your connected board.
4. Upload Code: Write or load your desired code (sketch) and upload it to the board. The board typically enters programming mode automatically. If not, you may need to manually press the BOOT button while pressing and releasing the RST button.

Using the 18650 Battery Holder:

The integrated 18650 battery holder allows for standalone operation. When a battery is inserted and the board is powered via USB-C, the HX6610S charging chip will charge the battery. The board can also run solely on battery power when disconnected from USB.

Onboard Switch:

The board features an ON/OFF switch. Use this switch to power the board on or off, especially when operating on battery power, to conserve energy.

Baxım

• Yaddaş: İstifadə edilmədikdə lövhəni quru, antistatik mühitdə saxlayın.
• Təmizləmə: Use a soft, dry brush or compressed air to remove dust. Avoid using liquids or harsh chemicals.
• İdarəetmə: Handle the board by its edges to avoid touching components, especially the ESP32-S3 module, to prevent electrostatic discharge (ESD) damage.
• Batareyaya qulluq: If using an 18650 battery, ensure it is a high-quality cell and follow standard battery safety guidelines. Do not overcharge or deep discharge the battery.

Problemlərin aradan qaldırılması

• Board Not Powering On:
  • Check USB-C cable connection and power source.
  • AÇIQ/SÖNDÜRÜCÜ düyməsinin "AÇIQ" vəziyyətində olduğundan əmin olun.
  • If using an 18650 battery, verify it is charged and correctly inserted.
• Upload Errors:
  • Verify correct board and serial port selection in your IDE.
  • Ensure USB-to-serial drivers are properly installed.
  • Try manually putting the board into bootloader mode (hold BOOT, press and release RST, then release BOOT).
  • Check for syntax errors in your code.
• Wi-Fi/Bluetooth Bağlantı Problemləri:
  • Ensure your code correctly initializes and configures the Wi-Fi/Bluetooth module.
  • Check antenna connections if an external antenna is used (though this board has an onboard antenna).
  • Verify power supply stability.
• Qwiic 4-Pin Not Working:
  • Ensure correct wiring and I2C address for the connected Qwiic module.
  • Verify that the Qwiic library is correctly included in your project.

İstifadəçi haqqında göstərişlər

• Sadə Başlayın: Begin with basic examples from the LILYGO GitHub repository to familiarize yourself with the board's functionalities before tackling complex projects.
• Güc idarəetməsi: Utilize the 18650 battery holder for projects requiring portability. Monitor battery levels, especially for long-term deployments.
• İcma Resursları: The ESP32 community is vast. Leverage online forums, documentation, and tutorials for project ideas and troubleshooting assistance.
• GPIO Flexibility: Refer to the pinout diagram carefully when assigning GPIOs for your sensors and peripherals to avoid conflicts and ensure proper functionality.

Zəmanət və Dəstək

For any technical support or inquiries regarding your LILYGO® T-Energy-S3 development board, please refer to the following guidelines:

• Unclear Order/Product: If you have any questions about your order or the product, please contact LILYGO customer service for a satisfactory solution.
• Damaged Package: In case of damage due to external force or transportation, provide a clear picture of the logistics label, carton/bag, and the damaged product. LILYGO will coordinate with the Logistics Service Provider to offer a solution.
• Customization/Bulk Orders: For customized products, bulk purchases, or any specific product inquiries, feel free to contact LILYGO customer service.

Please check the package and the product immediately after receiving it.