AYN ODIN2 PORTAL Game Handheld Console
Product Usage Instructions
Interface Introduction
- Volume: +/- L2 L1
- ON/OFF: R2 R1
- Select: Analog Joystick/L3
- D-Pad: Home
- Start: A/B/X/Y Analog Joystick/R3 Return
- M2: USB Type-C
- M1: TF Card
- Audio Jack
Safety Tips
- Throwing battery into a fire or water can cause the battery to rupture.
- Never attempt to charge a battery that has been physically damaged.
- Don’t leave the battery in the charger once it is fully charged.
- Don’t break the battery with a sharp tool to cause leakage or explosion.
- Be careful of burns when the surface temperature of the machine is high.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. To ensure compliance, follow these instructions: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements.
OVERVIEW
SPECIFICATION
| ODIN2 PORTAL BASE/PRO/MAX | |
| Processor | 8Gen2 |
| Process | 4nm |
| CPU | 1*X3@3.2G 2*A715@2.8G 2*A710@2.8G 3*A510@2G |
| GPU | Adreno 740 |
| Cooling | Active Cooling |
| Battery | 8000mAh |
| Charging Speed | 27Watt |
| Connectivity | Wi-Fi +BT5.3 |
| Interface | USB 3.1 Type C/3.5mm Audio Jack support TF card slot |
| Video Output | DisplayPort 4Kp60 |
| OS | Android 13 |
| Size | 257*98.6*17.2mm |
| Weight | 430g |
| RAM | 8GB/12GB/16GB |
| Storage | 128GB/512GB/1TB |
Safety Tips
- Throwing a battery into a fire or water can cause the battery to rupture.
- Never attempt to charge a battery that has been physically damaged.
- Don’t leave the battery in the charger once it is fully charged.
- Don’t break the battery with sharp tool to cause leakage or explosion.
- Be careful of burns when the surface temperature of the machine is high.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.ct.
The device has been evaluated to meet general RF exposure requirements.
FAQs
- Q: What should I do if my device gets hot?
- A: If your device becomes too hot, stop using it and allow it to cool down before resuming operation.
- Q: Can I charge the device overnight?
- A: It is recommended not to leave the device charging overnight to prevent overcharging.
- Q: How do I clean the device?
- A: Use a soft, dry cloth to gently clean the exterior of the device. Avoid using liquid cleaners.
Documents / Resources
 |
AYN ODIN2 PORTAL Game Handheld Console [pdf] Owner's Manual 2BDXN-Q2, 2BDXNQ2, ODIN2 PORTAL Game Handheld Console, ODIN2 PORTAL, Game Handheld Console, Handheld Console, Console |
