AXESS SPBL1043 Mini Portable Bluetooth Speaker
How to Use FM Radio
- Under M radio, the audio cable provided acts as an antenna. Please Insert the audio cable to
get the best FM signal. - Turn the power button to “ON”, and press the “MODE” button to switch to the FM radio state.
- Under playing mode, short press the “Play/pause” button to auto search the FM
- Channel and store it automatically.
- Press the Forward or Backward button to change the stored FM channel.
Colorful LED display and off
This unit will display 7 color bright pulsating lights when music is on. To turn the lights off, please push the Play/Pause button for 5 seconds
AUX-IN
For other compatible music devices for your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device. Then press the “MODE” button to switch to
AUX-IN state
When using an external device, all functions will be controlled by the external device except the “Plav/pause” button.
Important Note
- The unit will operate without the wire connection using the lithium battery. The amount of battery life depends on how hard the unit is working. Heavy, loud, bass music will use more energy.
- The built-in rechargeable battery is not replaceable. Do not remove or replace it, do not throw it in the trash or in the fire.
- When cleaning the product, use a soft dry cloth. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
INSTRUNCTIONFOR APPEARANCE AND KEY
- ON/OFF button
- USB port
- Aux-in jack
- Charging jack
- Mode (Switch Blue tooth, USB disk, FM and AUX-IN state)
- Backward/Volume down
- Forward/Volume up
- Play/Pause
Bluetooth connection
- Turn the power button to “ON”, The LED light will turn blue and blink quickly and beep twice
- Activate Bluetooth on mobile phone and search for device name “Axess SPBL1043” then connect.
- The blue LED light will blink slowly and beep a third time once connected successfully.
- Play the music from your mobile phone and enjoy. Press the Forward or Backward button on the devices or on Mobile phones to select songs you like.
- Press the Play/pause button on the devices or on Mobile phones to play/stop the music.
- Use the Bluetooth device to adjust volume up and down, or hold on the Forward or Backward button to adjust volume up and down on the unit.
Playing music from a USB
- Turn the Power button to “ON”.
- Insert USB into the slot, the music stored will be played automatically and the blue LED light
- will always keep stay on.
- Under playing mode, click the Forward or Backward button to select songs you like, Or hold
- Forward or Backward button to adjust volume up and down.
- PLAY/PAUSE to play or pause.
- Please turn the Power button to “OFF” when the unit is not in use.
Note
White Bluetooth playing mode, inserting the USB will disconnect the Bluetooth and switch the sound to USB. You can press the MODE button to switch to Bluetooth mode again.
Features
- 1.0 Passive HIFI Bluetooth Speaker:
- Outputs clear sound and dynamic sound effects;
- With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device such as your mobile phone, notebook, iPhone, or iPad;
- Secure simple pairing for user-friendly operating;
- 10 meters operating range;
- With USB support;
- With Line-in function, suitable for PC, MID, TV, and other audio devices;
- Built-in lithium rechargeable battery
- With 7 color bright pulsating lights;
- With lanyard
ACCESSORIES
- Charging cable
- Audio cable
- User manual
SPECIFICATION
- Bluetooth version
2.1 Support A2DP and AVRCP profile - Bluetooth range
up to 10 meters - Speakers Horn Size
2.5 inch - Horn output
6W,40 - Connections
USB disk Aux-in 3.5mm jack connection - Power supply
Built-in rechargeable lithium battery 1800mAh - Recharge power
DC 5V 1A (USB-to-micro USB charging cable included) - Product size
Ø98 226mm
Axess Products Corporation
- Address
6639 Valjean Ave., Van Nuys CA 91406 - Tel
818-785-4000 Fax: 818-785-5081
info@axessusa.com Questions? Comments? - Contact us at
support@axessusa.com
FAQ’s
Make sure the device’s Bluetooth is turned on by checking.
Then verify that both the speaker and the source device’s volume are turned on.
There is a chance that Bluetooth on the speaker or source device is broken if Bluetooth settings are enabled and the volume is turned up.
CONNECTION WITH BLUETOOTH:
The LED light will glow blue, twinkle swiftly, and beep twice when the power switch is turned to “ON.” 2. Turn on the Bluetooth on your smartphone, look for the device “SPBT1033,” and connect to it. When the connection is successful, the blue LED light will gently sparkle and beep three times.
It’s recommended to purchase a 5V universal charger that can be used with any device. An indicator light that indicates that the device is charging will turn on when these are connected properly and will remain on for the duration that the device is charging.
The battery will be harmed even if you leave the Bluetooth speaker connected the entire day. Even when the battery is fully charged, charging the speaker constantly could cause the battery to overheat and explode.
Charge Your Smartphone, Simply use your smartphone to charge the wireless speaker. All you have to do is attach your smartphone to it using the USB cord. You won’t need to worry about using a charger if you do it this way. You don’t need to buy anything more because you already carry a phone with you everywhere.
If the portable wireless speaker won’t turn on, check these things:
Check to see if your speaker has enough power.
Make sure the USB AC adapter is firmly (not loosely) attached to the speaker and the wall outlet.
Hold down the power button while waiting for the speaker to start up.
Set the power switch to “ON.” When you insert a USB flash drive into the slot, the music that is saved will instantly start playing and a blue LED light will remain lit. Shortly touch the Forward or Backward button while the song is playing to choose songs you like, and long press to quickly forward or rewind the song. To play or pause, click PLAY/PAUSE.
Axess. When the Axess speaker is unable to establish a Bluetooth connection, it makes an obnoxious beeping noise. By turning on Bluetooth on both devices and refreshing the pairing list, you can solve the connectivity problem. Additionally, both devices’ volume buttons can be adjusted to vary the volume.
If you play music through your Bluetooth speaker while it’s charging, it will keep going until the battery is fully charged. The speaker will automatically turn off after the battery is fully charged.
Keep Your Bluetooth Wireless Speaker Clean
The most crucial thing to keep in mind is not to clean your wireless Bluetooth speaker with water. Liquids can enter the internal components of the wireless Bluetooth speaker and hurt them. To remove dirt and other debris, a straightforward cloth will work well.
The Bluetooth speaker’s internal battery needs three (3) hours to fully recharge from a dead battery.
Of course, a Bluetooth speaker needs a built-in battery to be portable. A portable speaker’s battery life typically lasts between 6 and 12 hours, while some can go up to 24 hours.
Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge
There is a tiny, pinhole button with the word “reset” on it in the device’s control section, frequently hidden by a rubber cover. To press this button, use a pencil or another pointed object. When you hear the gadget turn off, hold down the “volume down” and “power” keys simultaneously for around 6 seconds.
Both devices’ volumes should be turned up. Ensure that the music is playing on your source device. Try to move the wireless speaker away from metal objects or other devices which may cause interference. Make sure nothing is plugged into the wireless speaker’s AUDIO IN port.
To get rid of any dust, use a soft, wet cloth to wipe the speakers’ surface. Any liquid cleansers should not be sprayed directly onto the surface of the speaker; instead, use a soft cloth and an ammonia-free window cleaner to remove dirt and other debris.
Each time, you can charge it for two to three hours. It often has a red charging indicator light. The battery is fully charged when the light goes off, indicating.
