AXAGON HMC-UFO USB-C Hub
Instructions for use
- Mount M.2 SSD disk to the hub. (fig. 1-3 ) Connect the hub to the PC USB port.
- An automatic installation will be performed. No need to install any external drivers.
- The hub is ready.
- In the Disk Manager, please initialize the new M.2 disk and format it. (fig. 4)
OPEN THE HUB – slide to the left
INSERT THE M.2 DISK
- a. use 2x thermal conductive pads
- b. insert the M.2 disk to slot
- c. adjust the rotary fixing plug
- d. lock the M.2 disk
- e. insert the passive heatsink
CLOSE THE HUB – slide to the right
INITIALIZE THE NEW DISK AND FORMAT IT IN DISK MANAGEMENT
SAFE DISCONNECTION OF EXTERNAL DEVICE
TECHNICAL SPECIFICATION
LED INDICATION
TECHNICAL SUPPORT: More information, FAQs, manuals, and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu.
Nothing helped? Write to our technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS).
The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user’s instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
2024 AXAGON VYrobce / Manufacturer: RealQ s.r.o. – Zeleznå 5a, 619 00 Brno, Czech Republic
- All rights reserved. All text and pictorial materials contained in this document are protected by the Copyright Act.
- All marks indicated here are the registered trademarks of their appropriate owners.
- Specifications are subject to change without prior notice.
- Made in China for AXAGON.
PRODUCT SUPPORT LINK
Documents / Resources
 |
AXAGON HMC-UFO USB-C Hub [pdf] Instruction Manual HMC-UFO USB-C Hub, HMC-UFO, USB-C Hub, Hub |