Avinox BC100-26 Wireless Controller Instruction Manual

Avinox BC100-26 Wireless Controller Instruction Manual

Avinox-logo

Avinox BC100-26 Wireless Controller

Avinox-BC100-26-Wireless-Controller-product

Usage Instructions

The AVINOX Wireless Controller connects to your display via Bluetooth, allowing for quick control of assist modes and touchscreen functions while riding.

  1. Increase Assistance Level Button: Press once to increase the assistance level.
  2. Decrease Assistance Level Button:
    • Press once to decrease the assistance level.
    • Press and hold to activate Walk mode.
  3. Switch Button:
    • Press once to switch between the home page and data page.
    • Press and hold to enter/exit Settings.
  4. Function Button:
    • Press once to confirm.
    • Press and hold to record activities.

Troubleshooting

This section will be updated with common troubleshooting steps. If you encounter issues, please refer to the following general advice:

  • Connectivity Issues: Ensure your display’s Bluetooth is active and the controller is within range. Try re-pairing the device if connection is lost.
  • Unresponsive Buttons: Check if the controller’s battery is charged. If the issue persists, try restarting both the controller and the display.
  • Interference: If you experience unexpected behavior, it might be due to electromagnetic interference. Try moving away from other electronic devices.
  • For persistent problems, consult the dealer or an experienced radio/TV technician for help.

Introduction

Wireless Controller can be connected to the display via Bluetooth. While riding, users can quickly switch the assist mode and control the touchscreen via the buttons of the Switch.

Usage

Avinox-BC100-26-Wireless-Controller-fig-1

  1. Increase Assistance Level Button: Press once to increase the assistance level.
  2. Decrease Assistance Level Button: Press once to decrease the assistance level. Press and hold to activate Walk mode.
  3. Switch Button: Press once to switch the home page and data page. Press and hold to enter/exit Settings.
  4. Function Button: Press once to confirm. Press and hold to record activities.

Specifications

Model BC100-26
Bluetooth Protocol BLE 5.1
Operating Frequency 2.402-2.480 GHz
Transmitter Power (EIRP) ≤4 dBm

FCC STATEMENT

  • Model: BC100-26
  • FCC ID: 2BRME-BC1002508

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

ISED Statement
Model/HVIN: BC100-26
IC: 34449-BC1002508
PMN: AVINOX WIRELESS CONTROLLER
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de verwerking van giftige stoffen.

Note:

  1. Risk of explosion if battery is replaced by an incorrect type.
  2. Do not ingest battery, Chemical Burn Hazard
  3. Dispose of used batteries according to the instructions.
  4. Do not replace battery with an incorrect type.
  5. Do not disposal battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
  6. Do not used in low air pressure at high altitude condition.
  7. Do not used in high or low extreme temperatures.
  8. This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  9. Keep new and used batteries away from children.
  10. If the battery compartment does not close securely, stop using the product and keep it away from children.
  11. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

MORE INFORMATION

EU Compliance Statement: SZ Avinox Innovation Co.,Ltd. hereby declares that this device (Avinox Wireless Controller) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.avinox-ebike.com/avinox-system/downloads  EU contact address: Avinox Trading B.V. Rodezand80, 4e verdieping, 3011 AN Rotterdam. GB Compliance Statement: SZ Avinox Innovation Co.,Ltd. hereby declares that this device (Avinox Wireless Controller) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at www.avinox-ebike.com/avinox-system/

Documents / Resources

PDF thumbnailBC100-26 Wireless Controller
Instruction Manual · BC100-26, 2BRME-BC1002508, BC100-26 Wireless Controller, BC100-26, Wireless Controller, Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.