AVID MiniTracker 4 Pet MicroChip Scanner Reader

Basic Instructions

1. Remove your new scanner from packaging.
2. Ensure batteries are installed correctly.
3. Press the Power button.
4. Read your first Microchip by holding down the read button- the number will be displayed once read!

Need Bluetooth

1. Press * button to go to the Settings.
2. Scroll down to Bluetooth and switch it on.
3. On your PC or handheld device search for the scanner which will be called AVID xxxxxx and then pair.
4. That’s it – Enjoy this your new scanner.
   

For complete user guide Scan the QR code above or visit avidid.com

Documents / Resources

	AVID MiniTracker 4 Pet MicroChip Scanner Reader [pdf] Instructions MiniTracker 4 Pet MicroChip Scanner Reader, MiniTracker 4, Pet MicroChip Scanner Reader, MicroChip Scanner Reader, Scanner Reader, Reader
	Avid MiniTracker 4 Pet MicroChip Scanner [pdf] User Guide MiniTracker 4 Pet MicroChip Scanner, MiniTracker 4, Pet MicroChip Scanner, MicroChip Scanner, Scanner

References

• User Manual