AVF EAK70W-A Speaker Mounts, Side Clamping
Introduction
- DIMENSIONS: 12.6 x 10.56 x 5.12 inches,
- WEIGHT: 3.8 pounds,
- COLOR: White,
- MAX TV WEIGHT: 20kg / 44lb.,
- UPWARD TILT: 5 degrees,
- DOWNWARD TILT: 15 degrees,
- ROTATION: 130 degrees
AVF offers a pair of adjustable wall mounts for speakers. These are all white wall mounts that are capable of holding speakers of a weight of 44 lbs. These mounts can be tilted and turned at different angles to optimize the learning experiences. The speaker mounts are easy to use and can be placed on the wall, side of your desk or whatever location you wish to without any difficulty. These mounts have the ability to allow adjustments in order to fit the speaker without any difficulty. They offer a width adjustment of 5.7 inches to 12.6 inches.
STOP
Read through ALL instructions before commencing installation. If you have any questions about this product or issues with installation, contact the customer services help line before returning this product to the store.
Tools Recommended
Boxed Parts
FREQUENTLY ASKED QUESTIONS
- What is the best way to place speakers for sound?
Remove your speakers from the closest wall by at least two to three feet. This will reduce sound reflections, which might impair the clarity of playback. the speaker’s stance (toe-in). In particular, aim your speakers at a spot immediately behind the listener’s head. Do this by angling your speakers inward. - Should speakers be wall mounted?
A centre-channel speaker is sometimes a good candidate for a wall mount. If the centre is to be housed in a cabinet, be sure to position it as near as you can to the edge of the cabinet. Any exposed shelf in front of the speaker will cause the sound to reflect off of it and bounce back, degrading the sound quality. - Can drywall hold speakers?
The mounting of the speakers will be extremely simple. No, brackets are not required if you’re installing in ridged ceilings or normal drywall. It’s as easy as inserting the speaker into the opening and tightening the four anchor screws after cutting the hole using the given template. - How do you mount without a drill?
Strong adhesives work well for mounting TVs on brick or concrete walls without the need for drilling. Additionally, rails and brick clip-on hangers are options. - Is it OK to hang speakers from ceiling?
Use a professional speaker mount to hang your speakers on the wall or ceiling if you want to keep them off of shelves or the floor. However, it should be mentioned that experts normally do not advise hanging speakers from the ceiling. - Can you mount bookshelf speakers on ceiling?
You can use an omni mount, but you’ll need to drill holes in the speaker and use screws to fasten the mount to the cabinet. Simply hang it upside-down from the ceiling, secure the speaker with clamps, and point it toward the middle seat. - What height should speakers be at?
If you have speaker stands, set the height such that the speaker is above 1.2 metres and level with your head. The dazzling, brilliant sections of the song are produced by the tweeter, the tiny speaker cone you can see. - Are on wall speakers better than in wall speakers?
You can produce a realistic soundstage and stereo imaging by putting on-wall speakers at ear level, depending on critical listening and dispersion. These systems differ from in-ceiling speakers in that they add dimensionality in addition to the stereo effect. - What is the difference between in wall and in-ceiling speakers?
Simply said, ceiling speakers are positioned down-firing from the ceiling above, whilst in- and on-wall speakers are mounted front-firing with the woofers pointing horizontally across the room. - Is it bad to put speakers in a corner?
It goes without saying that you are unlikely to listen from the corner of the room, but the opposite is also true: a loudspeaker placed next to a wall or in a corner will easily cause standing waves. Therefore, removing the loudspeakers from the corners and walls is often the best advice.
