ave Mobility RC10 Smart LCD Remote Controller
©Copyright 2022. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V3.1 – 07132022.
Revision History
| Revision History | |||
| Date | Description | Approval | Function |
|
07/07/2022 |
Version 1_Preliminary Draft Release | Andreas Hoffmann | Supervisor |
| Luis Tseng | Product Manager | ||
| Jerry Wang | Supervisor | ||
| B. D. Weidemann | Project Manager | ||
| 07/07/2022 | Version 2_Preliminary Draft Release | B. D. Weidemann | Project Manager |
| 07/12/2022 | Version 3_Preliminary Draft Release | B. D. Weidemann | Project Manager |
| 07/13/2022 | Version 3.1_Preliminary Draft Release | B. D. Weidemann | Project Manager |
Overview
This Quick Start Guide (QSG) is intended for users of the AVE RC10 Smart LCD Remote Controller. The QSG provides a step-based approach that is easy to follow and focused on helping the user quickly get familiar with the RC10’s features and functions. Carefully read the QSG before operating the E-Bike
Product Image
Main Features & Specifications
Main Features
- 1.14” Landscape IPS LCD
- High brightness with wide viewing angles
- Backlight illuminated buttons
- Sensors and BT/NFC wireless connectivity (Option)
- Standalone or in combination with CD9, CD8, TT10 or TT09
Specifications
| Item | Definition |
| LCD Size | 1.14″ (IPS Panel) |
| Viewing Angle (Horizontal/Vertical) | 160° (80°/80°)/160° (80°/80°) |
| Brightness (Typical) | 1,300cd/m2 |
| Orientation | Landscape |
| Coverlens | PMMA |
| Button Backlight | 4 (Single-Color) |
| Sensors | Light, Wind (Option), Baro (Option), Gyro (Option) |
| VTorque | Option: Requires Wind, Baro and Gyro Sensor |
| Bluetooth | BLE 5.x (Option) |
| Memory | Up To 32MB |
| Interface | CAN/CANopen, UART, RS-485, RS-232, LIN |
| Power (Wide VIN Range) | 7 – 55V |
| No. of Buttons (Total) | 4x (Power, Light/Menu, Assist Up, Assist Down) |
| NFC | Yes (Option) |
|
Display Data | Ride Time, ODO, Rem. Range, Bat. SoC, Bat. Temperature, Avg. Speed, Max. Speed, Cadence, Light Status, Assist Level, BLE Status, Walk Assist (Options: Time-To-Dest., Dist. Travelled, Altitude, Accum. Altitude, Windspeed, Humidity, Temperature, Rider Power, Calories, FTP, CdA, Crr, ABS Status, Slope) |
| Mounting | Hinge, 2x M4 Screw |
| IP Level | IP56 |
| Storage/Operating Temperature | -20° to +60°C (-4° to +140°F)/-10° to +50°C (14° to +122°F) |
| Connector | AVS 6-Pin |
| Dimensions (W x D x H) | 78mm x 45mm x 60mm (3.1” x 1.8” x 2.4”) |
| Weight | 50g (1.8oz) |
Button Behavior & Description
| Item No. | Description |
| 1 | Power On/Off Button |
| 2 | Pitot Tube for Windsensor |
| 3 | Ambient IR Lightsensor |
| 4 | IPS LCD Display |
| 5 | Light Mode · On/Off (Option: Front/Rear, Front & Rear, Day Light, High Beam Light, Parking Light) · Confirm – In Settings Mode (With CD9/CD8/TT10/TT09 only) · Enter Settings (Press Light+Down Button) |
| 6 | Assist Mode “DOWN” · Open WALK Assist mode · Cursor Down (With CD9/CD8/TT10/TT09 only) · Enter Settings (Press Light+Down Button) |
| 7 | Assist Mode “UP” · Activate Walk Assist · Cursor Up (With CD9/CD8/TT10/TT09 only) |
Standalone Configuration
Additional Configurations with CD9 or CD8 Center Display
Light Sensor Operations
RC10 Standalone Configuration
- Ambient light sensor controls brightness of: Backlight Button LED; LED Lightbar
- IR light sensor controls bicycle lights
Configuration with CD9/CD8
Ambient light sensor controls brightness of LCD backlight
Product Dimensions
Location of Markings
This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at www.eiae.org.
DISPOSAL
Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services.
Warnings
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: FCC ID: 2AUYC-RC10.
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Manufacturer Details (Smart Remote Controller)
AVS Electronics (HK) Ltd
16D Hollywood Centre, 77-91 Queens Road West, Sheung Wan, Hong Kong S.A.R.
©Copyright 2022. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V3.1 – 07132022.
Documents / Resources
 | ave Mobility RC10 Smart LCD Remote Controller [pdf] User Guide RC10, 2AUYC-RC10, 2AUYCRC10, RC10 Smart LCD Remote Controller, Smart LCD Remote Controller, LCD Remote Controller, Remote Controller, Controller |
