AUTOPHIX 3910 Bluetooth Scan Tool
Download APP
- Scan the QR code below to download Android and iOS software.
- iOS software can be downloaded from Appstore by searching for the “Autophix” keyword.
Android software can be downloaded from google play by searching for the “Autophix” keyword.
Note: This product only supports the Autophix APP connection and is not compatible with any other apps.
OBD interface location
On different vehicles the location of DLC may be different, please refer to the following possible
Operation diagram
Bluetooth connection
Turn on Bluetooth -Start the app -Automatic device connection-Connected.
Picture 1 is not connected, picture 2 is connected.
Start to use your device
After the bluetooth connected, it would start to run the diagnostic software when your vehicle supported. You can use all the functions of the device,lt fits for BMW diagnostics,standard 08DII function, and other functions. 
Feedback
You can send feedback to us if you encounter any problems during use, fill in the feedback content and submit.
Software upgrade and firmware upgrade
- 3910-APP software upgrade:
Delete the APP program directly, and then download the latest software again.(View the latest software version: Open app—Setting—about us). - 3910-APP firmware upgrade:
- Open app—Setting—Device settings—-firmware upgrade—currently the latest version (no need to update).
- Open app—Setting—Device settings—-firmware upgrade—current version and prompt for the latest version —- Click the’ upgrade ‘menu button– Firmware upgrade is successful (Need to update).
NOTICE:
The car brand logo and vehicle brand name on the display or as stated above are not a product source indicator.It is to describe the compatibility of the product with one or more specific vehicles.This scanner is not affiliated with the brands mentioned. This scanner only works for the above brands. All rights reserved to their respective owners.
Product parameters
- Working voltage: DC B-18V
- Working current: <24mA@DC12V
- Bluetooth frequency: 2.4GHz
- Bluetooth version: Bluetooth 5.0
- Working temperature: -30°C-70°C (-22°F-158° F)
- Storage temperature: -40°C-85°C (-40°F-185° F)
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
AUTOPHIX 3910 Bluetooth Scan Tool [pdf] User Manual 3910 Bluetooth Scan Tool, 3910, Bluetooth Scan Tool, Scan Tool, Tool |