Contents hide
1 AUTOOL ATF705 Automatic Transmission Fluid
2 Specifications
3 FAQ
4 COPYRIGHT INFORMATION
5 SAFETY RULES
6 CAUTIONS
7 MAINTENANCE AND CARE
8 PRODUCT INTRODUCTION
9 PRODUCT STRUCTURE
10 OPERATIONS INSTRUCTION
11 FUNCTIONAL OPERATION
12 MAINTENANCE SERVICE
13 WARRANTY
14 RETURN & EXCHANGE SERVICE
15 EU DECLARATION OF CONFORMITY
16 Documents / Resources
16.1 References

AUTOOL-LOGO

AUTOOL ATF705 Automatic Transmission Fluid

AUTOOL-ATF705-Automatic-Transmission-Fluid-PRODUCT

Specifications

  • Product Name: AUTOOL ATF705 Automatic Transmission Fluid (ATF) Exchanger
  • Manufacturer: AUTOOL TECHNOLOGY CO.,LTD
  • Website: www.autooltech.com
  • Contact: aftersale@autooltech.com | +86-755-2330 4822 / +86-400 032 0988
  • Address: Hangcheng Jinchi Industrial Park, Bao’an, Shenzhen, China

FAQ

Q: Can I use any type of transmission fluid with the AUTOOL ATF705?

A: It is recommended to only use ATF fluids designated as original AUTOOL products or AUTOOL-approved products by the manufacturer to prevent any damages or problems.

Q: What should I do if I encounter operational issues with the AUTOOL ATF705?

A: If you experience any operational issues, refer to the troubleshooting section of the user manual or contact AUTOOL or their authorized dealers for assistance.

www.autooltech.com

AUTOOL TECHNOLOGY CO.,LTD

COPYRIGHT INFORMATION

Copyright

  • All rights reserved by AUTOOL TECH. CO., LTD. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of AUTOOL. The informa-tion contained herein is designed only for the use of this unit. AUTOOL is not responsible for any use of this information as applied to other units.
  • Neither AUTOOL nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with AUTOOL operating and maintenance instructions.
  • AUTOOL shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designed as original AUTOOL products or AUTOOL-approved products by AUTOOL.
  • Other product names used herein are for identification purposes only and may be trademarks of their respective owners. AUTOOL disclaims any and all rights in those marks.

Trademark

Manual are either trademarks, registered trademarks, service marks, domain names, logos, company names or are otherwise the property of AUTOOL or its affiliates. In countries where any of the AUTOOL trademarks, service marks, domain names, logos and company names are not registered, AUTOOL claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of AUTOOL or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact AUTOOL by visiting AUTOOL at https://www.autooltech.com, or writing to aftersale@au-tooltech.com, to request written permission to use materials on this manual for purposes or for all other questions relating to this manual.

SAFETY RULES

General safety rules

  • Always keep this user manual with the machine.
  • Before using this product, read all the operational instructions in this manual. If you have any questions, feel free to contact us or our dealers.Failure to follow them may result in electric shock and irritation to skin and eyes.
  • Each user is responsible for installing and using the equipment according to this user manual. The supplier is not responsible for damage caused by improper use and operation.
  • This equipment must only be operated by trained and qualified personnel. Do not operate it under the influence of drugs, alcohol, or medication.
  • This machine is developed for specific applications. The supplier points out that any modification and/or use for any unintended purposes is strictly prohibited.
  • The supplier assumes no express or implied warranties or liabilities for personal injury or property damage caused by improper use, misuse, or failure to follow safety instructions.
  • This tool is intended for professional use only. Non-professional operation may result in injury to personnel or damage to tools or workpieces.
  • Keep out of reach of children.
  • When operating, ensure nearby personnel or animals maintain a safe distance. Avoid working in rain, water, or damp environments. Keep the work area well-ventilated, dry, clean, and bright.

Handling

  • Used/damaged equipment must not be disposed of in household waste but must be disposed of in an environmentally friendly manner. Use designated electrical equipment collection points.
  • Waste oil should be treated as hazardous waste, for example, it should be processed at a pollution recovery site.

Electrical safety rules

Do not twist or severely bend the power cord. It may damage the internal wires. If the power cord shows signs of damage, do not use the products. Damaged cables pose a risk of electric shock. Keep the power cord away from heat sources, oil sources, sharp edges, and moving parts. Damaged power cords must be replaced by the manufacturer, its technician, or similarly qualified personnel to pre-vent dangerous situations or injuries.

Equipment safety rules

  • Never leave the equipment unattended when it is powered on. Always turn off the equipment at the main switch and disconnect the power cord when not in use for its intended purpose!
  • Do not attempt to repair the equipment yourself.
  • Before connecting it to power, check that the socket voltage and fuse ratings match the values on the nameplate. Mismatch may cause serious hazards and equipment damage.
  • It is essential to protect the equipment from rainwater, moisture, mechanical damage, overload, and rough handling.

Application

  • Before use, check whether the power supply line, connecting hoses, and adapters are damaged. Do not operate the equipment if damaged.
  • Use the equipment only in compliance with all safety instructions, technical documents, and vehicle manufacturer specifications.
  • When adding supplementary fluids, only use brand-new and unopened products.

Personnel safety rules

  • The filling oil used in the equipment may be harmful to health and any contact must be avoided.
  • Always wear protective glasses when using the equipment to pro-tect the eyes from possible splashes. In case of contact, rinse with running water for several minutes under open eyelids. If symptoms persist, consult a doctor.
  • Always wear protective gloves during work to avoid skin contact with oils. If skin contact occurs, wash immediately with soap and water. Remove contaminated clothing or shoes immediately.
  • If swallowed, seek medical advice immediately.
  • The temperature of car engine exhaust pipes, radiators, and other parts can be quite high. Operators should keep a safe distance from these hot components to prevent burns.
  • Always ensure that you have a stable footing so that you can safely control the equipment in unexpected situations.

CAUTIONS

General safety

For the correct use of the instrument, please read the full text of this manual carefully before use.

  • Do not use the “Equal Exchange” or “Add New Oil” functions when the device is not connected to the car; such actions are strictly prohibited.
  • Do not add automatic transmission fluid or cleaning agents through the refilling eling port while the device is in operation.
  • When storing the equipment, the tanks for new and old oil within the device must be empty. The old oil should be transferred to another container immediately after the equipment has finished working to avoid affecting the precision of the equal exchange.
  • The equipment must be placed on a level surface during operation to prevent the oil pump from failing to cleanly draw the oil from the tank.
  • During the Equal Exchange of transmission fluid, except in emergencies, avoid turning off the engine and then restarting it. This helps prevent excessive voltage fluctuations when the engine starts, which could affect the accuracy of the equal exchange.

MAINTENANCE AND CARE

  • Pay attention to leaks at each connection point when exchanging the oil.
  • After each operation, promptly drain the waste oil from the equipment’s old oil tank and store the new oil in a container. This ensures that the electronic scale remains unloaded when not in use.
  • Keep the new oil tank clean.
  • If there are abnormal weight displays for the new and old oil, you can use the one-key zeroing function within the system parameters to zero the new and old oil electronic scales after draining the new and old oil tanks.
  • If the problem persists after one-key zeroing, please contact customer service promptly to calibrate the new and old oil electronic scales.
  • (If the equipment is different from what is described in the instructions, the actual operation should be based on the equipment itself.)

PRODUCT INTRODUCTION

Introduction

  • The AUTOOL ATF705 Automatic Transmission Fluid (ATF) Exchanger Machine can achieve fully automatic operation and complete high-preci-sion, equal-quantity cleaning and oil replacement in a short time, with an fluid change rate of over 90%. Its control precision ensures the quality of the exchange between new and old transmission fluid, providing the ultimate protection for the vehicle’s automatic transmission. With its intelli-gent process design, this equipment is an effective tool in the advanced maintenance of automotive operations.
  • Any other use is considered beyond the intended purpose of the equip-ment and is prohibited.

Specifications

Voltage DC 12V
Maximum power <150W
Pressure gauge 10kg/cm²
Outlet hose 2.5m
Oil return hose 2.5m
Oil tank 20L
Equal quantity replacement error <0.2kg
Noise <70db

Features

  • Automatic recognition of the direction of inlet/outlet oil, intelligent switching of the automatic transmission’s fluid flow direction.
  • Fully automatic completion of the replacement of new and old transmission fluid.
  • Fully automated program control for high-precision, equal quantity exchange between new and old fluid.
  • Fully automatic recognition of power supply polarity.
  • Automatic transmission cycle cleaning functionality.
  • Automatic adjustment of refilling quantity feature.
  • Various specialized adapters compatible with European, American, Japanese, Korean, and domestic car models.
  • Effectively solves the problem of incomplete manual replacement of transmission fluid.
  • Enhances the working performance of the transmission.
  • Extends the life of the transmission

PRODUCT STRUCTURE

Structure diagram

AUTOOL-ATF705-Automatic-Transmission-Fluid-FIG-2

A Control Panel B Oil Return Pressure Gauge
C Old Oil Level Window D New Oil Level Window
E New Oil Filling Port F New / Old Oil Window
G Power Switch H Fuse
I Transmission Connection Hose    

OPERATIONS INSTRUCTION

Preparation before operation

  • Connecting Power
    Connect the clamps to the two terminals of the car battery (DC12V; the device can automatically recognize the polarity).
  • Lifting the Car
    Raise the car so that the drive wheels are suspended at least 20cm off the ground. Engage the handbrake, and place wheel chocks securely in front and behind the non-drive wheels to ensure the vehicle’s stability.
  • Connecting the Hoses
    • Find the connection oil pipe between the transmission and radiator, and disconnect the one that’s easy to take apart.
    • Connect the appropriate connectors from the connector box to the ends of the disconnected oil pipe.
    • Connect the device’s hoses to the connectors on the ends of the disconnected transmission oil pipes, without considering their direction of flow.
  • Check and Confirm
    Start the engine, and ensure that the hoses are secure and leak-free, then turn on the device’s power switch.

FUNCTIONAL OPERATION

Cycle cleaning

  1. Add cleaning fluid (if cleaning fluid is not added, flushing can be carried out through the circulation of new oil).
    • Method one: Add cleaning fluid directly to the transmission (via the dipstick opening).
    • Method two: Add cleaning fluid to the equipment, and then add it to the transmission through the equipment.
    • Ensure that the new oil tank in the equipment is empty, then add cleaning fluid to the new oil barrel through the equipment filling port (it’s rec-ommended to add more than 1L, and if the cleaning fluid is less than 1L, then add new oil to make up to 1L).
    • Select the “Add New Oil” function.
    • Set the amount of cleaning fluid to match the new oil display volume.
    • Without starting the engine, select start to confirm.
    • The cleaning fluid in the new oil tank will be automatically added to the transmission.
  2. Select the “Cycle Cleaning” function, set the cleaning time, and then select start to confirm the cleaning of the transmission and begin the countdown. Cleaning can also be stopped by pressing the stop button.

Important Tips

  • To achieve the best cleaning results, the cleaning time should be set to more than 20 minutes.
  • During the Cycle Cleaning process, the engine should be running, and different gears should be switched during the cleaning process, depending on the situation. Stay in each gear for approximately one minute. When working in a high-speed gear, press the accelerator to reach a speed of 60 kilometers/hour or more to change the high-speed gear con-trol oil route of the automatic transmission fluid.

Equal exchange of old and new oil

  • Add transmission fluid into the oil filler port of the equipment.
  • Select the “Equal Exchange” function and set the amount of fluid to be exchanged.
  • Start the vehicle’s engine, then select start to confirm and begin the exchange. The interface will dynamically display relevant parameters in real-time.

Important Tips

  • Make sure that the oil hoses are properly connected.
  • The set oil exchange volume must not be larger than the amount of oil in the new oil tank; otherwise, the machine will not operate.
  • During operating, set the oil replacement amount to be about 2L more than the automatic transmission’s rated oil volume. This ensures that the automatic transmission oil is thoroughly replaced, especially if cleaning fluid has been added to the transmission before. It can minimize the residual cleaning fluid’s damage to the seals.
  • During the replacement process, switch between different gears as needed, staying in each gear for about a minute. When working in a high-speed gear, press the accelerator to reach a speed of 60 kilometers per hour or more to change the high-speed gear control oil route of the automatic transmission fluid.
  • Do not add new transmission fluid to the tank midway through this function’s operation, as this will result in unequal amounts! If new fluid does need to be added, wait until this function has finished running.

Adding new oil

When the vehicle’s automatic transmission fluid level is insufficient, and a certain amount of new oil needs to be added to the rated value, you can run this function.

  • Select the “Add New Oil” function and set the amount to be added.
  • Select start to confirm and begin the exchange. The interface dynamically displays relevant parameters in real-time.

Important Tips

  • The set amount to be added must not be larger than the amount of oil in the new oil tank; otherwise, the machine will not operate.
  • Do not start the engine.

Recycling used oil

When you need to recycle the used oil from the vehicle’s automatic transmission back into the equipment, you can run this function.

  • Select the “Recycle Used Oil” function and set the amount to be recycled.
  • Start the vehicle’s engine, select start to confirm and begin the exchange. The interface dynamically displays relevant parameters in real-time.

Drain new oil

  • Select the “Drain New Oil” function, at which point the equipment’s oil hoses must not be connected to the vehicle.
  • Select start to confirm and begin the exchange. The oil from the new oil tank will be drained into the old oil tank.

Draining used oil

  • Open the equipment’s back door, loosen the fixed strap on the old oil tank, remove all hoses from inside the old oil tank, and remove the old oil tank from inside the equipment. Drain the old oil.
  • After draining, properly place the empty old oil tank on the weighing pan, insert the hoses, and secure them with straps.

MAINTENANCE SERVICE

Our products are made of long-lasting and durable materials, and we insist on perfect production process. Each product leaves the factory after 35 pro-cedures and 12 times of testing and inspection work, which ensures that each product has excellent quality and performance.

Maintenance

To maintain the performance and appearance of the product, it is recom-mended that the following product care guidelines be read carefully：

  • Be careful not to rub the product against rough surfaces or wear the product, especially the sheet metal housing.
  • Please regularly check the product parts that need to be tightened and connected. If found loose, please tighten it in time to ensure the safe oper-ation of the equipment. The external and internal parts of the equipment in contact with various chemical media should be frequently treated with anti-corrosion treatment such as rust removal and painting to improve the corrosion resistance of the equipment and extend its service life.
  • Comply with the safe operating procedures and do not overload the equipment. The safety guards of the products are complete and reliable. Unsafe factors are to be eliminated in time. The circuit part should be checked thoroughly and the aging wires should be replaced in time.
  • Adjust the clearance of various parts and replace worn (broken) parts. Avoid contact with corrosive liquids.
  • When not in use, please store the product in a dry place. Do not store the product in hot, humid, or non-ventilated places.

WARRANTY

From the date of receipt, we provide a three-year warranty for the main unit and all the accessories included are covered by a one-year warranty.

Warranty access

  • The repair or replacement of products is determined by the actual breakdown situation of product.
  • It is guaranteed that AUTOOL will use brand-new components, accessory or device in terms of repair or replacement.
  • If the product fails within 90 days after the customer receives it, the buyer should provide both video and picture, and we will bear the shipping cost and provide the accessories for the customer to replace it free of charge. While the product is received for more than 90 days, the customer will bear the appropriate cost and we will provide the parts to the customer for replacement free of charge.

These conditions below shall not be in the warranty range

  • The product is not purchased through official or authorized channels.
  • The product breakdown because the user does not follow product instructions to use or maintain the product.
    We AUTOOL pride ourselves on superb design and excellent service. It would be our pleasure to provide you with any further support or services.

Disclaimer

All information, illustrations, and specifications contained in this manual, AUTOOL resumes the right of modify this manual and the machine itself with no prior notice. The physical appearance and color may differ from what is shown in the manual, please refer to the actual product. Every effort has been made to make all descriptions in the book accurate, but inevitably there are still inaccuracies, if in doubt, please contact your dealer or AUTOOL after-service centre, we are not responsible for any consequences arising from misunderstandings.

RETURN & EXCHANGE SERVICE

Return & Exchange

  • If you are an AUTOOL user and are not satisfied with the AUTOOL prod-ucts purchased from the online authorized shopping platform and offline authorized dealers, you can return the products within seven days from the date of receipt; or you may exchange it for another product of the same value within 30 days from the date of delivery.
  • Returned and exchanged products must be in fully saleable condition with documentation of the relevant bill of sale, all relevant accessories and original packaging.
  • AUTOOL will inspect the returned items to ensure that they are in good condition and eligible. Any item that does not pass inspection will be returned to you and you will not receive a refund for the item.
  • You can exchange the product through the customer service center or AUTOOL-authorized distributors; the policy of return and exchange is to return the product from where it was purchased. If there are difficulties or problems with your return or exchange, please contact AUTOOL Custom-er Service.
China 400-032-0988
Oversea Zone +86 0755 23304822
E-mail aftersale@autooltech.com
Facebook https://www.facebook.com/autool.vip
YouTube https://www.youtube.com/c/autooltech

EU DECLARATION OF CONFORMITY

We as the manufacturer declare that the designated product:
Auto ATF Exchanger (Model ATF 705)
Complies with the requirements of the:
CE-MD Committee Directive 2006/42/EC
RoHS Directive 2011/65/EU + 2015/863 + 2017/2102

Applied Standards:
EN 60204-1:2018, EN ISO 12100:2010
IEC 62321-3-1:2013, IEC 62321-5:2013, IEC 62321-4:2013+A1:2017, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-1:2013, IEC 62321-6:2015, IEC 62321-8:2017
Certificate No.: ZHT-230207010C, ZHT-230207011C
Test Report No.: ZHT-230207010S, ZHT-230207011R

 

Manufacturer

 Shenzhen AUTOOL Technology Co, Ltd.
Floor 2, Workshop 2, Hezhou Anle Industrial Park, Hezhou Community, Hangcheng Street, Bao ‘an District, Shenzhen Email: aftersale@autooltech.com
 

AUTOOL-ATF705-Automatic-Transmission-Fluid-FIG-3

 COMPANY NAME: XDH Tech
ADRESS: 2 Rue Coysevox Bureau 3, Lyon, France

E-MaiL: xdh.tech@outlook.com CONTACT PERSON: Dinghao Xue

Documents / Resources

AUTOOL ATF705 Automatic Transmission Fluid [pdf] User Manual
ATF705, SDT101, ATF705 Automatic Transmission Fluid, ATF705, Automatic Transmission Fluid, Transmission Fluid, Fluid

References

Leave a comment

Your email address will not be published. Required fields are marked *