Autonics logoS2SR Series Selector Switches
CATALOG

InstructionsAutonics S2SR Series Selector Switches

S2SR Series Selector Switches

For your safety, read and follow the considerations written in the instruction manual, other manuals and Autonics website.
The specifications, dimensions, etc. are subject to change without notice for product improvement. Some Models may be discontinued without notice.

Features

  • Smooth operation
  • High electrical conductivity
  • Long-lasting durability

Autonics S2SR Series Selector Switches - icon 1

Safety Considerations

  • Observe all ‘Safety Considerations’ for safe and proper operation to avoid hazards.
  • Warning icon symbol indicates caution due to special circumstances in which hazards may occur.

Warning icon Warning Failure to follow instructions may result in serious injury or death.

  1. Fail-safe device must be installed when using the unit with machinery that may cause serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment, ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime / disaster prevention devices, etc.)
    Failure to follow this instruction may result in personal injury, economic loss or fire.
  2. Do not use the unit in the place where flammable / explosive / corrosive gas, high humidity, direct sunlight, radiant heat, vibration, impact, or salinity may be present.
    Failure to follow this instruction may result in explosion or fire.
  3. Install on a device panel to use.
    Failure to follow this instruction may result in fire or electric shock.
  4. Do not connect, repair, or inspect the unit while connected to a power source.
    Failure to follow this instruction may result in fire or electric shock.
  5. Do not disassemble or modify the unit.
    Failure to follow this instruction may result in fire or electric shock.

Warning icon Caution Failure to follow instructions may result in injury or product damage.

  1. This unit shall not be used outdoors.
    Failure to follow this instruction may result in shortening the life cycle of the product or electric shock.
  2. Use the unit within the rated specifications.
    Failure to follow this instruction may result in fire or product damage.
  3. Do not use the load beyond rated switching capacity contact.
    Failure to follow this instruction may result in fire, relay broken, contact melt, insulation failure or contact failure.
  4. For wiring the product, do not pull the wiring excessively or apply excessive force.
    Failure to follow this instruction may result in product damage or malfunction.
  5. Use dry cloth to clean the unit, and do not use water or organic solvent.
    Failure to follow this instruction may result in fire or electric shock.
  6. Keep the product away from metal chip, dust, and wire residue which from flowing into the unit.
    Failure to follow this instruction may result in fire or product damage.

Specifications

Series S2SR Series
Actuation angle 2-position: [Spring return] 60º ±5º, 90º ±5º [Maintained] 90º ±5º
3-position: [Spring return] 60º ±5º, 45º ±5º [Maintained] 90º ±5º, 45º ±5º
Actuation force 0.5 kgf (4.9 N) (per 1 contact)
Installation Extended
Shock 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times
Shock (malfunction) 100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times
Vibration 1.5 mm amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 2 hours
Vibration (malfunction) 1.5 mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 minutes
Mechanical life cycle ≥ 100,000 operations (20 operations/min)
Ambient temperature (control unit life cycle) -15 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation)
Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Protection structure Control unit: IP52 (IEC standard)
Approval Autonics S2SR Series Selector Switches - icon 2
Control unit weight Standard head type: ≈ 19 g
Shark-head type: ≈ 16 g
Housing weight ≈ 7 g

Contact blocks

Power supply / current 110 VACᜠ / 10 A, 250 VACᜠ / 6 A
Dielectric strength 2,500 VACᜠ 50/60 Hz for 1 minute
Insulation resistance ≥ 1,000 MΩ (500 VDCᜡ megger)
Contact resistance ≤ 20 mΩ (initial)
Electrical life cycle ≥ 100,000 operations (20 operations/min)
Contact material AgNi10
Approval Autonics S2SR Series Selector Switches - icon 3
Weight Modular type: ≈ 10 g, Singular type: ≈ 11 g

LED blocks

Rated voltage AC/DC voltage type: 12-24 VAC ∼ 50/60 Hz, 12-24 VDC EGO ST1400E ST 56 Volt Lithium Ion Cordless Line Trimmer - Icon 6
AC voltage type: 110-220 VAC ∼ 50/60 Hz
Current consumption ≤ 20 mA
Approval Autonics S2SR Series Selector Switches - icon 4
Weight AC/DC voltage type: ≈ 11 g, AC voltage type: ≈ 12 g

Sold Separately

  • Contact blocks (SA□-C□□)
  • LED blocks (SA□-L□□□)
  • Switch enclosures (SA-□B□)
  • Locking handle (SA□-LH)
  • Switch washer (SA-SW□)

Assembly / Disassembly

  • Assembly order: ①→②→③→④
  • Disassembly order: ⓐ→ⓑ→ⓒ→ⓓ

Autonics S2SR Series Selector Switches - Assembly

Control Switches Panel thickness Tightening torque
Ø 22/25/30 mm Max. 6 mm ≤ 1.96 N.m

Actuation Angle

■ 2-position spring return (standard lever) ■ 2-position maintained (standard lever)
Autonics S2SR Series Selector Switches - Actuayion Angle 1 Autonics S2SR Series Selector Switches - Actuayion Angle 2
■ 2-position spring return (shark-head lever) ■ 2-position maintained (shark-head lever)
Autonics S2SR Series Selector Switches - Actuayion Angle 3 Autonics S2SR Series Selector Switches - Actuayion Angle 4
■ 3-position two-way spring return ■ 3-position maintained
Autonics S2SR Series Selector Switches - Actuayion Angle 5 Autonics S2SR Series Selector Switches - Actuayion Angle 6
■ 3-position right spring return ■ 3-position left spring return
Autonics S2SR Series Selector Switches - Actuayion Angle 7 Autonics S2SR Series Selector Switches - Actuayion Angle 8

Ordering Information

This is only for reference. For selecting the specified Model, follow the Autonics website.
Model is based on control unit+block combination. Control units or blocks are sold separately. In case of block, refer to control switch accessories.
■ Non-illuminatedAutonics S2SR Series Selector Switches - Non illuminated

  1. Appearance
    No mark: Standard lever
    N: Shark-head lever
  2. Operation
    Short lever Long lever Operation
    1 2 2-position spring return
    3 4 2-position maintained
    5 6 3-position two-way spring return
    7 8 3-position maintained
    A B 3-position right spring return
    C D 3-position left spring return
  3. Actuation angle
    Refer to Actuation Angle.
  4. Button color
    R: Red
    W: White
  5. Contact block
    A: 1 A contact
    2A: 2 A contacts
    B: 1 B contact
    2B: 2 B contacts
    AB: 1 A contact, 1 B contact
  6. Block
    No mark: Singular type
    M: Modular type
Model Contact block LED block
A contact B contact AC/DC voltage AC voltage
S2SR-S1□A(M) 1
S2SR-S1□2A(M) 2
S2SR-S1□B(M) 1
S2SR-S1□2B(M) 2
S2SR-S1□AB(M) 1 1
S2SR-S3□A(M) 1
S2SR-S3□2A(M) 2
S2SR-S3□B(M) 1
S2SR-S3□2B(M) 2
S2SR-S3□AB(M) 1 1
S2SR-S5K□2A(M) 2
S2SR-S5K□2B(M) 2
S2SR-S5K□AB(M) 1 1
S2SR-S7K□2A(M) 2
S2SR-S7K□2B(M) 2
S2SR-S7K□AB(M) 1 1
S2SR-SAK□2A(M) 2
S2SR-SAK□2B(M) 2
S2SR-SAK□AB(M) 1 1
S2SR-SCK□2A(M) 2
S2SR-SCK□2B(M) 2
S2SR-SCK□AB(M) 1 1
S2SR-S5□2A(M) 2
S2SR-S5□2B(M) 2
S2SR-S5□AB(M) 1 1
S2SR-S7□2A(M) 2
S2SR-S7□2B(M) 2
S2SR-S7□AB(M) 1 1
S2SR-SA□2A(M) 2
S2SR-SA□2B(M) 2
S2SR-SA□AB(M) 1 1
S2SR-SC□2A(M) 2
S2SR-SC□2B(M) 2
S2SR-SC□AB(M) 1 1
S2SR-S2□A(M) 1
S2SR-S2□2A(M) 2
S2SR-S2□B(M) 1
S2SR-S2□2B(M) 2
S2SR-S2□AB(M) 1 1
S2SR-S4□A(M) 1
S2SR-S4□2A(M) 2
S2SR-S4□B(M) 1
S2SR-S4□2B(M) 2
S2SR-S4□AB(M) 1 1
S2SR-S6K□2A(M) 2
S2SR-S6K□2B(M) 2
S2SR-S6K□AB(M) 1 1
S2SR-S8K□2A(M) 2
S2SR-S8K□2B(M) 2
S2SR-S8K□AB(M) 1 1
S2SR-SBK□2A(M) 2
S2SR-SBK□2B(M) 2
S2SR-SBK□AB(M) 1 1
S2SR-SDK□2A(M) 2
S2SR-SDK□2B(M) 2
S2SR-SDK□AB(M) 1 1
S2SR-S6□2A(M) 2
S2SR-S6□2B(M) 2
S2SR-S6□AB(M) 1 1
S2SR-S8□2A(M) 2
S2SR-S8□2B(M) 2
S2SR-S8□AB(M) 1 1
S2SR-SB□2A(M) 2
S2SR-SB□2B(M) 2
S2SR-SB□AB(M) 1 1
S2SR-SD□2A(M) 2
S2SR-SD□2B(M) 2
S2SR-SD□AB(M) 1 1
S2SRN-S1A□A(M) 1
S2SRN-S1A□2A(M) 2
S2SRN-S1A□B(M) 1
S2SRN-S1A□2B(M) 2
S2SRN-S1A□AB(M) 1 1
S2SRN-S3A□A(M) 1
S2SRN-S3A□2A(M) 2
S2SRN-S3A□B(M) 1
S2SRN-S3A□2B(M) 2
S2SRN-S3A□AB(M) 1 1
S2SRN-S1B□A(M) 1
S2SRN-S1B□2A(M) 2
S2SRN-S1B□B(M) 1
S2SRN-S1B□2B(M) 2
S2SRN-S1B□AB(M) 1 1
S2SRN-S3B□A(M) 1
S2SRN-S3B□2A(M) 2
S2SRN-S3B□B(M) 1
S2SRN-S3B□2B(M) 2
S2SRN-S3B□AB(M) 1 1
S2SRN-S1□A(M) 1
S2SRN-S1□2A(M) 2
S2SRN-S1□B(M) 1
S2SRN-S1□2B(M) 2
S2SRN-S1□AB(M) 1 1
S2SRN-S5K□2A(M) 2
S2SRN-S5K□2B(M) 2
S2SRN-S5K□AB(M) 1 1
S2SRN-S7K□2A(M) 2
S2SRN-S7K□2B(M) 2
S2SRN-S7K□AB(M) 1 1
S2SRN-SAK□2A(M) 2
S2SRN-SAK□2B(M) 2
S2SRN-SAK□AB(M) 1 1
S2SRN-SCK□2A(M) 2
S2SRN-SCK□2B(M) 2
S2SRN-SCK□AB(M) 1 1
S2SRN-S5□2A(M) 2
S2SRN-S5□2B(M) 2
S2SRN-S5□AB(M) 1 1
S2SRN-S7□2A(M) 2
S2SRN-S7□2B(M) 2
S2SRN-S7□AB(M) 1 1
S2SRN-SA□2A(M) 2
S2SRN-SA□2B(M) 2
S2SRN-SA□AB(M) 1 1
S2SRN-SC□2A(M) 2
S2SRN-SC□2B(M) 2
S2SRN-SC□AB(M) 1 1
S2SRN-S2A□A(M) 1
S2SRN-S2A□2A(M) 2
S2SRN-S2A□B(M) 1
S2SRN-S2A□2B(M) 2
S2SRN-S2A□AB(M) 1 1
S2SRN-S4A□A(M) 1
S2SRN-S4A□2A(M) 2
S2SRN-S4A□B(M) 1
S2SRN-S4A□2B(M) 2
S2SRN-S4A□AB(M) 1 1
S2SRN-S2B□A(M) 1
S2SRN-S2B□2A(M) 2
S2SRN-S2B□B(M) 1
S2SRN-S2B□2B(M) 2
S2SRN-S2B□AB(M) 1 1
S2SRN-S4B□A(M) 1
S2SRN-S4B□2A(M) 2
S2SRN-S4B□B(M) 1
S2SRN-S4B□2B(M) 2
S2SRN-S4B□AB(M) 1 1
S2SRN-S2□A(M) 1
S2SRN-S2□2A(M) 2
S2SRN-S2□B(M) 1
S2SRN-S2□2B(M) 2
S2SRN-S2□AB(M) 1 1
S2SRN-S6K□2A(M) 2
S2SRN-S6K□2B(M) 2
S2SRN-S6K□AB(M) 1 1
S2SRN-S8K□2A(M) 2
S2SRN-S8K□2B(M) 2
S2SRN-S8K□AB(M) 1 1
S2SRN-SBK□2A(M) 2
S2SRN-SBK□2B(M) 2
S2SRN-SBK□AB(M) 1 1
S2SRN-SDK□2A(M) 2
S2SRN-SDK□2B(M) 2
S2SRN-SDK□AB(M) 1 1
S2SRN-S6□2A(M) 2
S2SRN-S6□2B(M) 2
S2SRN-S6□AB(M) 1 1
S2SRN-S8□2A(M) 2
S2SRN-S8□2B(M) 2
S2SRN-S8□AB(M) 1 1
S2SRN-SB□2A(M) 2
S2SRN-SB□2B(M) 2
S2SRN-SB□AB(M) 1 1
S2SRN-SD□2A(M) 2
S2SRN-SD□2B(M) 2
S2SRN-SD□AB(M) 1 1

Illuminated

Autonics S2SR Series Selector Switches - illuminated

  1. Operation
    Short lever Long lever Operation
    1 2 2-position spring return
    3 4 2-position maintained
    5 6 3-position two-way spring return
    7 8 3-position maintained
    A B 3-position right spring return
    C D 3-position left spring return
  2. Actuation angle
    Refer to Actuation Angle.
  3. Button color
    R: Red
    B: Blue
    G: Green
    Y: Yellow
  4. Contact block
    A: 1 A contact
    2A: 2 A contacts
    B: 1 B contact
    2B: 2 B contacts
    AB: 1 A contact, 1 B contact
  5. LED block
    D: 1 AC/DC voltage type
    L: 1 AC voltage type
  6. Block
    No mark: Singular type
    M: Modular type
Model Contact block LED block
A contact B contact AC/DC voltage AC voltage
S2SRN-L1A□AL(M) 1 1
S2SRN-L1A□2AL(M) 2
S2SRN-L1A□BL(M) 1
S2SRN-L1A□2BL(M) 2
S2SRN-L1A□ABL(M) 1 1
S2SRN-L3A□AL(M) 1 1
S2SRN-L3A□2AL(M) 2
S2SRN-L3A□BL(M) 1
S2SRN-L3A□2BL(M) 2
S2SRN-L3A□ABL(M) 1 1
S2SRN-L1B□AL(M) 1 1
S2SRN-L1B□2AL(M) 2
S2SRN-L1B□BL(M) 1
S2SRN-L1B□2BL(M) 2
S2SRN-L1B□ABL(M) 1 1
S2SRN-L3B□AL(M) 1 1
S2SRN-L3B□2AL(M) 2
S2SRN-L3B□BL(M) 1
S2SRN-L3B□2BL(M) 2
S2SRN-L3B□ABL(M) 1 1
S2SRN-L1□AL(M) 1 1
S2SRN-L1□2AL(M) 2
S2SRN-L1□BL(M) 1
S2SRN-L1□2BL(M) 2
S2SRN-L1□ABL(M) 1 1
S2SRN-L5K□2AL(M) 2 1
S2SRN-L5K□2BL(M) 2
S2SRN-L5K□ABL(M) 1 1
S2SRN-L7K□2AL(M) 2 1
S2SRN-L7K□2BL(M) 2
S2SRN-L7K□ABL(M) 1 1
S2SRN-LAK□2AL(M) 2 1
S2SRN-LAK□2BL(M) 2
S2SRN-LAK□ABL(M) 1 1
S2SRN-LCK□2AL(M) 2 1
S2SRN-LCK□2BL(M) 2
S2SRN-LCK□ABL(M) 1 1
S2SRN-L5□2AL(M) 2 1
S2SRN-L5□2BL(M) 2
S2SRN-L5□ABL(M) 1 1
S2SRN-L7□2AL(M) 2 1
S2SRN-L7□2BL(M) 2
S2SRN-L7□ABL(M) 1 1
S2SRN-LA□2AL(M) 2 1
S2SRN-LA□2BL(M) 2
S2SRN-LA□ABL(M) 1 1
S2SRN-LC□2AL(M) 2 1
S2SRN-LC□2BL(M) 2
S2SRN-LC□ABL(M) 1 1
S2SRN-L1A□AD(M) 1 1
S2SRN-L1A□2AD(M) 2
S2SRN-L1A□BD(M) 1
S2SRN-L1A□2BD(M) 2
S2SRN-L1A□ABD(M) 1 1
S2SRN-L3A□AD(M) 1 1
S2SRN-L3A□2AD(M) 2
S2SRN-L3A□BD(M) 1
S2SRN-L3A□2BD(M) 2
S2SRN-L3A□ABD(M) 1 1
S2SRN-L1B□AD(M) 1 1
S2SRN-L1B□2AD(M) 2
S2SRN-L1B□BD(M) 1
S2SRN-L1B□2BD(M) 2
S2SRN-L1B□ABD(M) 1 1
S2SRN-L3B□AD(M) 1 1
S2SRN-L3B□2AD(M) 2
S2SRN-L3B□BD(M) 1
S2SRN-L3B□2BD(M) 2
S2SRN-L3B□ABD(M) 1 1
S2SRN-L1□AD(M) 1 1
S2SRN-L1□2AD(M) 2
S2SRN-L1□BD(M) 1
S2SRN-L1□2BD(M) 2
S2SRN-L1□ABD(M) 1 1
S2SRN-L5K□2AD(M) 2 1
S2SRN-L5K□2BD(M) 2
S2SRN-L5K□ABD(M) 1 1
S2SRN-L7K□2AD(M) 2 1
S2SRN-L7K□2BD(M) 2
S2SRN-L7K□ABD(M) 1 1
S2SRN-LAK□2AD(M) 2 1
S2SRN-LAK□2BD(M) 2
S2SRN-LAK□ABD(M) 1 1
S2SRN-LCK□2AD(M) 2 1
S2SRN-LCK□2BD(M) 2
S2SRN-LCK□ABD(M) 1 1
S2SRN-L5□2AD(M) 2 1
S2SRN-L5□2BD(M) 2
S2SRN-L5□ABD(M) 1 1
S2SRN-L7□2AD(M) 2 1
S2SRN-L7□2BD(M) 2
S2SRN-L7□ABD(M) 1 1
S2SRN-LA□2AD(M) 2 1
S2SRN-LA□2BD(M) 2
S2SRN-LA□ABD(M) 1 1
S2SRN-LC□2AD(M) 2 1
S2SRN-LC□2BD(M) 2
S2SRN-LC□ABD(M) 1 1
S2SRN-L2A□AL(M) 1 1
S2SRN-L2A□2AL(M) 2
S2SRN-L2A□BL(M) 1
S2SRN-L2A□2BL(M) 2
S2SRN-L2A□ABL(M) 1 1
S2SRN-L4A□AL(M) 1 1
S2SRN-L4A□2AL(M) 2
S2SRN-L4A□BL(M) 1
S2SRN-L4A□2BL(M) 2
S2SRN-L4A□ABL(M) 1 1
S2SRN-L2B□AL(M) 1 1
S2SRN-L2B□2AL(M) 2
S2SRN-L2B□BL(M) 1
S2SRN-L2B□2BL(M) 2
S2SRN-L2B□ABL(M) 1 1
S2SRN-L4B□AL(M) 1 1
S2SRN-L4B□2AL(M) 2
S2SRN-L4B□BL(M) 1
S2SRN-L4B□2BL(M) 2
S2SRN-L4B□ABL(M) 1 1
S2SRN-L2□AL(M) 1 1
S2SRN-L2□2AL(M) 2
S2SRN-L2□BL(M) 1
S2SRN-L2□2BL(M) 2
S2SRN-L2□ABL(M) 1 1
S2SRN-L6K□2AL(M) 2 1
S2SRN-L6K□2BL(M) 2
S2SRN-L6K□ABL(M) 1 1
S2SRN-L8K□2AL(M) 2 1
S2SRN-L8K□2BL(M) 2
S2SRN-L8K□ABL(M) 1 1
S2SRN-LBK□2AL(M) 2 1
S2SRN-LBK□2BL(M) 2
S2SRN-LBK□ABL(M) 1 1
S2SRN-LDK□2AL(M) 2 1
S2SRN-LDK□2BL(M) 2
S2SRN-LDK□ABL(M) 1 1
S2SRN-L6□2AL(M) 2 1
S2SRN-L6□2BL(M) 2
S2SRN-L6□ABL(M) 1 1
S2SRN-L8□2AL(M) 2 1
S2SRN-L8□2BL(M) 2
S2SRN-L8□ABL(M) 1 1
S2SRN-LB□2AL(M) 2 1
S2SRN-LB□2BL(M) 2
S2SRN-LB□ABL(M) 1 1
S2SRN-LD□2AL(M) 2 1
S2SRN-LD□2BL(M) 2
S2SRN-LD□ABL(M) 1 1
S2SRN-L2A□AD(M) 1 1
S2SRN-L2A□2AD(M) 2
S2SRN-L2A□BD(M) 1
S2SRN-L2A□2BD(M) 2
S2SRN-L2A□ABD(M) 1 1
S2SRN-L4A□AD(M) 1 1
S2SRN-L4A□2AD(M) 2
S2SRN-L4A□BD(M) 1
S2SRN-L4A□2BD(M) 2
S2SRN-L4A□ABD(M) 1 1
S2SRN-L2B□AD(M) 1 1
S2SRN-L2B□2AD(M) 2
S2SRN-L2B□BD(M) 1
S2SRN-L2B□2BD(M) 2
S2SRN-L2B□ABD(M) 1 1
S2SRN-L4B□AD(M) 1 1
S2SRN-L4B□2AD(M) 2
S2SRN-L4B□BD(M) 1
S2SRN-L4B□2BD(M) 2
S2SRN-L4B□ABD(M) 1 1
S2SRN-L2□AD(M) 1 1
S2SRN-L2□2AD(M) 2
S2SRN-L2□BD(M) 1
S2SRN-L2□2BD(M) 2
S2SRN-L2□ABD(M) 1 1
S2SRN-L6K□2AD(M) 2 1
S2SRN-L6K□2BD(M) 2
S2SRN-L6K□ABD(M) 1 1
S2SRN-L8K□2AD(M) 2 1
S2SRN-L8K□2BD(M) 2
S2SRN-L8K□ABD(M) 1 1
S2SRN-LBK□2AD(M) 2 1
S2SRN-LBK□2BD(M) 2
S2SRN-LBK□ABD(M) 1 1
S2SRN-LDK□2AD(M) 2 1
S2SRN-LDK□2BD(M) 2
S2SRN-LDK□ABD(M) 1 1
S2SRN-L6□2AD(M) 2 1
S2SRN-L6□2BD(M) 2
S2SRN-L6□ABD(M) 1 1
S2SRN-L8□2AD(M) 2 1
S2SRN-L8□2BD(M) 2
S2SRN-L8□ABD(M) 1 1
S2SRN-LB□2AD(M) 2 1
S2SRN-LB□2BD(M) 2
S2SRN-LB□ABD(M) 1 1
S2SRN-LD□2AD(M) 2 1
S2SRN-LD□2BD(M) 2
S2SRN-LD□ABD(M) 1 1

Dimensions

  • Unit: mm, For the detailed drawings, follow the Autonics website.
  • Panel thickness: ≤ 6 mm

■ S2SR-S1/3/5/7/A/C▭
(standard / short lever, singular type block)Autonics S2SR Series Selector Switches - Dimensions 1■ S2SR-S1/3/5/7/A/C▭M
(standard / short lever, modular type blockAutonics S2SR Series Selector Switches - Dimensions 2■ S2SR-S2/4/6/8/B/D▭
(standard / long lever, singular type block)Autonics S2SR Series Selector Switches - Dimensions 3■ S2SR-S2/4/6/8/B/D▭M
(standard / long lever, modular type block)Autonics S2SR Series Selector Switches - Dimensions 4■ S2SRN-□1/3/5/7/A/C▭
(shark-head / short lever, singular type block)Autonics S2SR Series Selector Switches - Dimensions 5■ S2SRN-□1/3/5/7/A/C▭M
(shark-head / short lever, modular type block)Autonics S2SR Series Selector Switches - Dimensions 6■ S2SRN-□2/4/6/8/B/D▭
(shark-head / long lever, singular type block)Autonics S2SR Series Selector Switches - Dimensions 7■ S2SRN-□2/4/6/8/B/D▭M
(shark-head / long lever, modular type block)Autonics S2SR Series Selector Switches - Dimensions 8■ Panel cut-out
Autonics S2SR Series Selector Switches - Dimensions 9

A B
Short lever ≥ 33 ≥ 55
Long lever ≥ 55 ≥ 55

18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com | +82-2-2048-1577 | sales@autonics.com
Autonics logo

Documents / Resources

Autonics S2SR Series Selector Switches [pdf] Instructions
S2SR Series Selector Switches, S2SR Series, Selector Switches, Switches

References

Leave a comment

Your email address will not be published. Required fields are marked *