To check battery level and initiate charging, connect the micro
USB cable to the motor. The soft start feature ensures a smooth
operation when starting the motor.

Speed Control:

To adjust the motor speed, refer to the programming instructions
provided in the manual. You can increase or decrease the speed
based on your preferences.

Setup:

The AUTOMATE Versa Drapery Motor is designed for easy
incorporation into popular drapery track systems. Follow the
installation guide for proper setup.

FAQ:

Q: How do I set a favorite positioning?

A: To set a favorite position, refer to section 12.1 in the
programming instructions manual.

Q: How do I adjust the motor speed?

A: You can increase or decrease the motor speed by following the
steps outlined in section 13 of the programming instructions.

Q: How do I check the battery level?

A: To check the battery level, use the battery check function
described in section 15 of the programming instructions.

“`

View Fullscreen

MOTOR PROGRAMMING INSTRUCTIONS
Versa Drapery Motor

INSTR. AUTOMATE_VERSA DRAPERY MOTOR_v2.3 FEBRUARY 2024

MANUAL ACTIVATION

SOFT START & ADJUSTABLE MICRO USB BATTERY CHECK SIMPLIFIED

STOP

SPEED CONTROL CHARGING

ACTION

SET-UP

AUTOMATETM | ARCTM Versa Drapery motor is compatible with popular drapery track systems for easy incorporation of curtains into the ARC motorized platform. The Soft Touch feature enables manual operation when needed.
The AUTOMATE Versa Drapery motor now offers the option to power the motor with a battery or continuous AC.

FEATURES: · Electronic Torque sensing “Auto-set” Limits · 433 MHz Bi-Directional RF Communication · Leveling Control · Inverted or Standard Mount · Favorite Position · Soft start / stop

· Soft touch control · Speed Control

CONTENTS
1 SAFETY INSTRUCTIONS 2 COMPLIANCE STATEMENTS 3 VERSA DRAPERY MOTOR SPECIFICATIONS 4 RATINGS (VERSA BATTERY MODULE) 5 CHARGING (VERSA BATTERY MODULE) 6 WIRING (VERSA AC MODULES) 6.1 US (120V) 6.2 US + Field Plug (120V) 6.3 AU (240V) 7 ASSEMBLY 7.1 Attaching and removing the motor 7.2 Attaching and removing the battery or AC module 8 P1 BUTTON FUNCTIONS 8.1 Motor State Test 9 INITIAL SET UP 9.1 Pair motor with controller 9.2 Check/ Change motor direction (initial set up) 9.2.1 Check/ Change motor direction (initial set up) 9.3 Auto Set Limits 10 ADJUSTING LIMITS 10.1 Adjust open limit 10.2 Adjust close limit 10.3 Delete limits 11 CONTROLLERS AND CHANNELS 11.1 Using motor P1 button 11.2 Using existing controller to add a new controller or channel 11.3 Using pre-existing controller to add or delete a controller or channel
2 | AutomateTM Programming Instructions | Versa Drapery Motor

4 5 6 7 7 8 8 8 9 10 11 12 13 13 14 14 14 15 15 16 16 16 17 17 17 18 18
ROLLEASE ACMEDA

CONTENTS

12 FAVORITE POSITIONING

12.1 Set a favorite position

12.2 Send to favorite position

12.3 Delete favorite position

13 ADJUST MOTOR SPEED

13.1 Increase motor speed

13.2 Decrease motor speed

14 SOFT TOUCH FUNCTION

14.1 Operating with Soft Touch Function

14.2 Turn soft touch function on/off

15 BATTERY CHECK FUNCTION

15.1 Send curtain to battery charge level

16 RS485 COMMUNICATION

16.1 Enable RS485 communication

16.2 Disable RS485 communication

16.3 RS485 Failure

17 SLEEP MODE

17.1 Enter Sleep Mode

17.2 Exit Sleep Mode

18 EXTERNAL LOW VOLTAGE SWITCH MODE

18.1 Two Button Spring Return Switch (Default Mode)

18.2 Three Button Spring Return Switch

18.3 Single Button Spring Return Switch

19 TROUBLESHOOTING

3 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

1 SAFETY INSTRUCTIONS
WARNING: Important safety instructions to be read before installation.
Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty.

· Do not expose to moisture or extreme temperatures. · Do not allow children to play with this device. · Use or modification outside the scope of this

years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or

instruction manual will void warranty.
· Installation and programming to be performed by a

instruction concerning use of the appliance in a safe way and understand the hazards involved. Children

suitably qualified installer.
· For use within curtains and drapes. · Use only Rollease Acmeda hardware. · Before installation, remove any unnecessary cords

shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
· Frequently examine the installation for imbalance and

and disable any equipment not needed for powered

signs of wear or damage to cables and springs. Do not

operation.
· Ensure torque and operating time is compatible with

use if repair or adjustment is necessary.
· This appliance is intended to be used to drive drapes

end application.

and curtains, etc.

· · Do not expose the motor to water or install in humid or

Hazardous unprotected moving parts of the drive shall

damp environments.

be installed higher than 2,5 m above the floor or other

· Motor is to be installed in vertical application only.

level that could provide access to it.

· Do not drill into motor body.

· Install the actuating member of a manual release at a

· The routing of cable through walls shall be protected

height less than 1.8m.

by isolating bushes or grommets.

· That the actuating member of a biased-off switch

· Ensure power cable is clear and protected from moving

is to be located within direct sight of the driven part

parts.
· If cable or power connector is damaged do not use. · Ensure all mechanical connections are secure. · Risk of Electric Shock, Dry location use only for indoor

but away from moving parts. It is to be installed at a
minimum height of 1,5 m and not accessible to the
public.
· The mass and the dimension of the driven part shall be

use only.
· This appliance can be used by children aged from 8

compatible with the rated torque and rated operating time.

Important safety instructions to be read prior to operation.
· It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference. · Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not be allowed to use this product.
· Keep remote controls away from children. · Frequently inspect for improper operation. Do not use if repair or adjustment is necessary. · Keep motor away from acid and alkali. · Keep clear when in operation. · Electrical wiring must be carried out by a licensed electrician.

4 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

2 COMPLIANCE STATEMENTS

WARNING: Important safety instructions to be read before installation and use.

Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty. It is important for the safety of persons to follow the enclosed instructions.

Save these instructions for future reference.

· Do not put in fire.
· Do not expose to water, moisture, humid and damp environments or extreme temperatures.

· Installation and programming to be performed by a suitably qualified installer.
· Follow installation instructions.

· Do not crush, puncture, disassemble and damage.

· For use with motorized shading devices.

· Do not expose to temperature above 60°C / 140°F.

· Frequently inspect for improper operation.

· Do not short circuit the battery module.

· Do not use if repair or adjustment is necessary.

· Do not leave the battery module on prolonged charge when not

· Keep clear when in operation.

in use.

· Replace battery with correctly specified type.

· Persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, should ·

Avoid in direct sunlight or rain.

not be allowed to use this product.

· The battery module needs to be charged before use. Use the

· Use or modification outside the scope of this instruction manual will void warranty.

battery module only for the versa drapery motor. Refer to Versa Drapery Motor instruction manual for assembly.

FCC & ISED Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.

Do not dispose of in general waste. Please recycle batteries and damaged electrical products appropriately.
5 | AutomateTM Programming Instructions | Versa Drapery Motor

CAN ICES-3 (B)/NMB-3(B)
ROLLEASE ACMEDA

3 VERSA DRAPERY MOTOR SPECIFICATIONS

Code
Description
Region Power Cable Length Voltage Output Voltage Input Capacity Running Time Current Power Stored Energy Charge Voltage Protection Class Torque Speed Frequency Sound Level
Weight
RF Protocol RF Modulation RF Signal Range Limit Switch Type
Temperature Range
Limit Range Insulation Class Life Cycle Testing Charge Time Solar Panel Gen2

VERSA DRAPERY MOTOR SPECIFICATIONS

MT01-2101-xxx002 MT03-0305-xxx004 MT03-0305-069005 MT03-0305-069006

Versa Drapery Motor Battery Module

AC Module 10′ Cord AC Module 20′ Cord + Plug

AU / EU / US

–

3m [ 10′ ]

6.1m [ 20′ ]

–

14.4V DC

18.0V DC

15V DC

–

120V AC 60 Hz

–

2.55 Ah

–

12 min

–

1.3 A

–

2.0 A

20.0 W

–

36.0 W

–

36.72 Wh

–

5V DC (Micro USB)

–

IP20

1.2 Nm

–

80 | 100 | 120

–

433.925 MHz *

–

44 dB

–

0.83 Kg

0.27 Kg

0.32 Kg

0.49 Kg

1.83 lbs

0.60 lbs

0.71 lbs

1.08 lbs

ARC

–

FSK

–

15m [ 49 ft ]

–

Electronic

–

-10 – 50 °C

0 – 45 °C

-10 – 50 °C

14 – 122 °F

32 – 113 °F

14 – 122 °F

–

Class A

10,000 Cycles| 50 Kg | Upto 11m Track

–

8 hrs @ 2A

–

5V USB Compatible

–

MT03-0305-xxx012 AC Module 2.5m Cord
AU 2.5m [ 8.2′] 240V AC 50Hz
0.30 Kg 0.66 lbs

Notes * Maximum transmitted power 10 mW Motor/Battery protection activates when battery voltage reaches 13.5V DC (motor stops when battery is flat) 120 RPM is Default speed in operation ( 80 RPM is defult speed during limit setting ) Charge time is based on typical 5V / 2A charge rate of fully discharged battery, actual time may vary between batteries

Versa Battery Module
Model: MT03-0305-xxx004

Versa AC Module
Model: MT03-0305-069005 MT03-0305-069006 MT03-0305-xxx012

6 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

4 RATINGS (VERSA BATTERY MODULE)
Model: MT03-0305-xxx004 Typical output voltage: 16.8VDC
Charge: 5VDC 2A or 5VDC 1A with USB plug

Rate output voltage: 14.4VDC Nominal capacity: 2.55Ah

5 CHARGING (VERSA BATTERY MODULE)
CHARGERS Strongly recommended chargers: · RA US model: MT03-0301-069008 (marked as MX15W-0502000UU) · RA AU model: MT03-0301-069011 (marked as MX15W-0502000SU) However, the battery module also accepts universal 5VDC 2A/1A USB chargers.

Important: Before first use, charge battery fully until LED indicator turns Green (Solid) Solid Red = Charging Solid Green = Fully Charged Charge battery using 5V Micro USB

Battery Charge LED Indicator

7 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

6 WIRING (VERSA AC MODULES)
6.1 US (120V)
Disconnect the mains power supply. Connect the motor according to the information in the table below.
Ensure cable is kept clear of fabric.

Power OFF

MT03-0305-069005

MT03-0305-069006

MOTOR MT03-0305-069005 MT03-0305-069006

POWER 120V AC / 60Hz

NEUTRAL White

LIVE Black

EARTH N/A

POWER CORD LENGTH 10 ft (3m) 20 ft (6.1m)

6.2 US + Field Plug (120V)
Connect the motor according to the information in the table below. Ensure cable is kept clear of fabric.

Right Angle Field Plug

FIELD PLUG MT03-0601-069001

POWER 125V AC / 60Hz

8 | AutomateTM Programming Instructions | Versa Drapery Motor

NEUTRAL White

LIVE Black

EARTH Green

ROLLEASE ACMEDA

6 WIRING (VERSA AC MODULES) 6.3 AU (240V)
Connect the motor according to the information in the table below. Ensure cable is kept clear of fabric.

MOTOR MT03-0305-xxx012

POWER 240V AC 50Hz

NEUTRAL Blue

LIVE Brown

EARTH N/A

POWER CORD LENGTH 8.2 ft (2.5m)

9 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

7 ASSEMBLY
GENERAL SCHEMATIC
2. 1a. 1b.

1a. 3.

4a.

WARNING:

4b.

ENSURE PROPER ORIENTATION OF THE

4c.

MASTER CARRIER WHEN ASSEMBLING THE

SYSTEM. THE MASTER CARRIER SHOULD BE

ATTACHED TO THE BELT EXACTLY AS

DESCRIBED AND DEPICTED IN THIS

ASSEMBLY GUIDE TO ENSURE CORRECT

SETTING AND FUNCTIONALITY OF THE

MOTOR LIMITS.

SYSTEM INDEX: 1a. Motor End Pulley 1b. Overlap Return Pulley 2. Curtain Track

3. Versa Drapery Motor 4a. Battery 4b. AC Power Adapter

10 | AutomateTM Programming Instructions | Versa Drapery Motor

4c. AC Power Adapter (Long Cable)
ROLLEASE ACMEDA

7 ASSEMBLY

7.1 Attaching and removing the motor

ATTACHING THE MOTOR TO DRIVE PULLEY STEP 1 Slide the lock button fully left against the spring pressure force

STEP 4
CHECK the Motor and Pulley are securely attached by trying to pull them apart.

STEP 2 Align and engage the Motor with the Drive Pulley as shown.

REMOVING THE MOTOR FROM THE DRIVE PULLEY
STEP 1 Slide the lock button fully left against the spring pressure force

STEP 3
Push to Lock Button fully to the right to ensure they two are securely attached.

STEP 2 Pull the Motor away from the Drive Pulley

11 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

7 ASSEMBLY

7.2 Attaching and removing the battery or AC module

ATTACHING THE BATTERY OR AC MODULE TO THE MOTOR STEP 1 Slide the lock button fully left against the spring pressure force

STEP 4
CHECK the Motor and Battery (or AC Module) are securely attached by trying to pull them apart.

STEP 2 Align and engage the Battery or AC Module with the Motor as shown.
REMOVING THE BATTERY OR AC MODULE FROM THE MOTOR
STEP 1 Slide the lock button fully left against the spring pressure force

STEP 3
Push to Lock Button fully to the right to ensure they two are securely attached.

STEP 2 Pull the battery or AC module away from the motor

12 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

8 P1 BUTTON FUNCTIONS

8.1 Motor State Test

This table describes the function of a short P1 button press/release(<2 seconds) depending on current motor configuration.

P1 Press

Condition

Function Achieved

Visual Feedback

Short Press then
Release (<2 sec)

If limit is NOT set
If limits are set
If motor is in “Sleep Mode” & limits are set
(Refer to Sec.10)

None Operational control of motor, run to limit. Stop if
running
Wake and control

No Action
Motor runs
Motor wakes and runs in a
direction

Audible Feedback
None None
None

Function Described
No Action
Operational control of motor after pairing and limit setting
is completed first time
Motor is restored from Sleep mode and RF control is active

Hold P1 button on motor head. Activate Pairing Mode

GREEN LED

Approx.
Sleep Mode

P1 Button LED

RJ45 Antenna Hole

Approx.

Enter Setting Mode

Approx.

Approx. 10

Reset To Factory Settings

Approx.

Approx. 10

Approx.

13 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

9 INITIAL SET UP

9.1 Pair motor with controller

Select channel on controller.

Hold P1 button on motor head.

Hold STOP on controller.

IMPORTANT
Consult user manual for your controller for information on selecting channel.

Motor Response

Motor Response Approx.

Motor is now in setup mode and ready for setting limits

Notes:

When limits are not set only one remote channel can be paired with the motor

When limits are set, up to ten channels can be paired with the motor

9.2 Check/ Change motor direction (initial set up)

To check travel direction of shade, press UP or DOWN on controller..

To reverse shade direction, hold both UP and DOWN. Until the motor responds.

Quick Press = Step Long Press = Continuous Travel

Motor Response Approx.

14 | AutomateTM Programming Instructions | Versa Drapery Motor

IMPORTANT
Reversing motor direction using this method is only possible during initial set-up
ROLLEASE ACMEDA

9.2.1 Check/ Change motor direction (initial set up)
Press P1 on Motor for 10 seconds to enter setting mode
P1

To reverse direction, hold both UP and DOWN. Until the motor
responds.

Motor Response

Motor Response Approx.

Approx.

Approx. 10

Note:
Changing motor direction after initial set up (with limits already set) will clear the limits. Open and close the curtain to re-set the limits automatically.

9.3 Auto Set Limits

The AUTOMATE Versa Drapery motor features automatic limit detection. Once the motor is attached to a fabricated, installed track, limits can be set with a few simple actions.

Press the UP or DOWN buttons on controller. Carrier will run to the end of the track.

When carrier has reached the end of the track, it will automatically set limit there.
Repeat for opposite end.

Motor Response

Approx.
IMPORTANT
To verify limits were successfully set, press up or down to run to limit. Motor should now function with slow start/slow stop feature. After the limits are set, the motor will only move in the set limit range. If the motor encounters a new obstacle a maximum of THREE TIMES at the same position, the limit will automatically reset. Note: If the motor encounters an obstacle, collision detection will stop the motor to prevent damage.

Initial set-up is now complete
15 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

10 ADJUSTING LIMITS

10.1 Adjust open limit
Hold UP and STOP on controller.

Move curtain to the desired open position by pressing the UP or DOWN button.

Motor Response Approx. 5 SECS

To save desired open limit, hold UP and STOP.
Motor Response Approx. 5 SECS

10.2 Adjust close limit
Hold DOWN and STOP on controller.

Move curtain to the desired closed position by pressing
the UP or DOWN button.

To save desired close limit, hold DOWN and STOP.

Motor Response Approx. 5 SECS

Notes:
· Once in limit adjustment mode, button selection on the remote must be made within 2 minutes, if not, motor will exit adjustment mode.
· To exit limit adjustment mode without making changes, press P1 or P2 and limits will remain unchanged.

16 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

10.3 Delete limits
Press P2 on controller

Press DOWN on controller

Press P2 on controller

Motor Response

11 CONTROLLERS AND CHANNELS
11.1 Using motor P1 button
Hold P1 button on motor head.
P1

Hold STOP on controller to add or remove

Motor Response

Motor Response Approx.

17 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

11.2 Using existing controller to add a new controller or channel

A= Existing controller or channel (to keep) B= Controller or channel to add or remove
Press P2 on controller A

Press P2 on controller A

Press STOP on the new controller to add it

Motor Response

IMPORTANT
Consult user manual for your controller or sensor
11.3 Using pre-existing controller to add or delete a controller or channel

A= Existing controller or channel (to keep) B= Controller or channel to add or remove

Press P2 on controller A

Press P2 on controller B to
remove it

Motor Response

IMPORTANT
Consult user manual for your controller or sensor 18 | AutomateTM Programming Instructions | Versa Drapery Motor

Motor Response ROLLEASE ACMEDA

12 FAVORITE POSITIONING 12.1 Set a favorite position
Move curtain to desired position by pressing the UP or DOWN button on the controller. Move shade to the desired position by pressing the UP or DOWN button on the controller.
OR

Press P2 on controller.

Press STOP on controller.

Motor Response

12.2 Send to favorite position
Press STOP on controller.
Approx.

12.3 Delete favorite position

Press P2 on controller.

Press STOP on controller.

Motor Response

19 | AutomateTM Programming Instructions | Versa Drapery Motor

Motor Response ROLLEASE ACMEDA

13 ADJUST MOTOR SPEED
Notes: · There are three speed settings (80,100 & 120 RPM). · With limits set, the default speed is MAXIMUM speed. · If motor responds to the inputs below with two quick beeps, the speed setting is already at the maximum
or minimum speed trying to be set. · When motor limits are not set, default speed is minimum.
13.1 Increase motor speed

Press P2

Press UP

Motor Response

13.2 Decrease motor speed
Press P2

Press DOWN

Motor Response

20 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

14 SOFT TOUCH FUNCTION
The AUTOMATE Versa Drapery Motor exhibits a built-in function which enables the motor to be initiated by hand-draw. When the fabric is displaced more than 10cm by hand-draw, the motor continues to move towards the drawn direction, until the limit is reached.
The Soft Touch Function can be toggled on and off by pressing the P1 button for 10 seconds, followed by the STOP button.
14.1 Operating with Soft Touch Function

OPEN

CLOSED

Hand-draw curtain fabric 10cm to initiate Soft Touch function

14.2 Turn soft touch function on/off
Continuously hold P1 button on motor head for 10 seconds
P1

Press STOP on controller to switch soft touch function on or off.

Motor Response

Approx.

Approx. 10

Motor Response

21 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

15 BATTERY CHECK FUNCTION 15.1 Send curtain to battery charge level
Hold UP

Percentage of Battery Charge Remaining

Open Limit Closed Limit Percentage Depleted

Motor Response Approx. 5 SEC

Hold UP for Approx. 5s Curtain will close first if not already closed

Curtain then moves to percentage of battery charge remaining

16 RS485 COMMUNICATION
Notes: · Default RS485 function is disabled. · RS485 function is not available when motor is powered by the Battery. · RS485 function is ONLY available when motor is powered by AC Module. · Motors must be paired one at a time with control PC when multiple motors are to be connected on a
network.

16.1 Enable RS485 communication

Continuously hold P1 button on motor head for 2 seconds
P1

Hold UP on controller for 5 seconds

Motor Response

22 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

16.2 Disable RS485 communication
Continuously hold P1 button on motor head for 2 seconds
P1

Hold UP on controller for 5 seconds

Motor Response

16.3 RS485 Failure

RS485 failure reminder when trying to turn on RS485 function of battery powered motor:

Continuously hold P1 button on motor head for 2 seconds
P1

Hold UP on controller for 5 seconds

Motor Response

23 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

17 SLEEP MODE
If multiple motors are grouped on a single channel, Sleep Mode may be used to put all but 1 motor to sleep, allowing programming of just the one motor that remains “Awake”. See page 6 for detailed P1 functions.
17.1 Enter Sleep Mode
Enter Sleep Mode Sleep mode is utilized to prevent a motor from incorrect configuration during other motor setup.
Hold P1 button on the motor head
Motor Response
Approx.
Notes: In sleep mode, the Soft Touch Function is available and operating the curtain via this method will not cause the motor to exit sleep mode.
17.2 Exit Sleep Mode
Exit Sleep Mode: Method 1 Exit sleep mode once the shade is ready. Press and release P1 button on the motor head
Motor Response
Motor will move in last default direction to limit position
Exit Sleep Mode: Method 2 Remove power and then re-power the motor.

24 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

18 EXTERNAL LOW VOLTAGE SWITCH MODE

18.1 Two Button Spring Return Switch (Default Mode)

Press P1 on motor for 10 seconds to enter setting mode

Press P2 on controller

Press P1 on motor for 2 seconds
P1

Motor Response

Approx.

Approx. 10

Motor Response

18.2 Three Button Spring Return Switch

Press P1 on motor for 10 seconds to enter setting mode

REPEAT 2X

Press P2 on controller

Press P1 on motor for 2 seconds
P1

Motor Response

Approx.

Approx. 10

25 | AutomateTM Programming Instructions | Versa Drapery Motor

Motor Response ROLLEASE ACMEDA

18.3 Single Button Spring Return Switch

Press P1 on motor for 10 seconds to enter setting mode

REPEAT 3X

Press P2 on controller

Press P1 on motor for 2 seconds
P1

Motor Response

Approx.

Approx. 10

Motor Response

26 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

19 TROUBLESHOOTING

Problem
Motor is not responding
Motor Beeps + Flashes x4 Times Cannot program a single Motor (multiple motors respond)

Cause

Remedy

A / C power supply not plugged in.

Check motor to power cable connection and AC plug

Insufficient charging from solar PV panel

Check connection and orientation of PV panel

Transmitter battery is discharged Replace battery

Incorrect Wiring (AC Module power)

Check wiring of Field Plug if not factory fitted

Radio interference/shielding

Ensure transmitter is positioned away from metal objects and the aerial on motor or receiver is kept straight and away from metal

Receiver distance is too far from Move transmitter to a closer

transmitter

position

Charging failure

Connect battery to charger and check if LED indicates charging

Battery voltage is low

Recharge with a compatible charger

Always reserve an individual channel for programming functions

Multiple motors are paired to the same channel.

SYSTEM BEST PRACTICE – Provide an extra 15 channel remote in your multi motor projects, that provides individual control for each motor for programming purposes

Place all other motors into sleep mode. Refer to sleep mode section.

27 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA

ROLLEASE ACMEDA | USA Level 7 / 750 East Main Street Stamford, CT 06902, USA T +1 800 552 5100 | F +1 203 964 0513

ROLLEASE ACMEDA | AUSTRALIA 110 Northcorp Boulevard, Broadmeadows VIC 3047, AUS T +61 3 9355 0100 | F +61 3 9355 0110

28 | AutomateTM Programming Instructions | Versa Drapery Motor

ROLLEASE ACMEDA | EUROPE Via Conca Del Naviglio 18, Milan (Lombardia) Italy T +39 02 8982 7317 | F +39 02 8982 7317
ROLLEASE ACMEDA

Documents / Resources

AUTOMATE v2.3 Versa Drapery Motor [pdf] Instruction Manual
v2.3 Versa Drapery Motor, v2.3, Versa Drapery Motor, Drapery Motor, Motor

References

User Manual

v2.3 Versa Drapery Motor

Product Information

Specifications:

Product Usage Instructions:

Manual Activation:

Soft Start & Adjustable Micro USB Battery Check:

Speed Control:

Setup:

FAQ:

Q: How do I set a favorite positioning?

Q: How do I adjust the motor speed?

Q: How do I check the battery level?

Documents / Resources

References

Leave a comment

Cancel reply