AS-A6 Smart Camera
Product Information
Specifications:
- Product: Smart Camera
- Model: 28
Product Usage Instructions:
1. Power On/Off:
To power on the smart camera, press and hold the power button
for 3 seconds. To power off, repeat the same process.
2. Setting Up:
Follow the on-screen instructions to set up your smart camera.
Connect it to a Wi-Fi network for full functionality.
3. Capturing Photos:
Press the capture button to take photos. Use the zoom feature
for close-up shots.
4. Recording Videos:
Switch to video mode and press the record button to start
recording videos. Ensure there is enough storage space
available.
5. Viewing and Transferring Media:
You can view your photos and videos on the camera’s display
screen. To transfer media to a computer, use the included USB
cable.
Frequently Asked Questions (FAQ):
Q: How do I charge the smart camera?
A: Use the provided charger and connect it to the camera’s
charging port. Make sure to charge fully before use.
Q: Can I use a memory card with the smart camera?
A: Yes, you can insert a compatible memory card to expand
storage capacity for photos and videos.
Q: How do I update the firmware of the smart camera?
A: Check the manufacturer’s website for firmware updates and
follow the provided instructions to update your camera.
Smart camera
28
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Documents / Resources
 |
Ausek AS-A6 Smart Camera [pdf] Instruction Manual 2BCMP-ASA6, 2BCMPASA6, asa6, AS-A6 Smart Camera, AS-A6, Smart Camera, Camera |