Auri RX1 Sound Receiver

Specifications:

• Product: AuriTM RX1 Receiver
• Power Source: USB-C
• Ports: USB-C, Headphone & Loop Lanyard Jacks
• Controls: Power button, Volume control, Scan/Select, Scroll channel list

Product Usage Instructions

First Use:

1. Remove the protective screen cover.
2. The receiver needs to be charged before activation. Connect a USB-C power supply or charge in a docking station and fully charge before use.
3. The receiver LED will flash white while charging and be solid white at full charge.

Basic Operation:
Press and hold the power button to turn on/off the receiver.

Setup:

1. To configure the receiver, place it in an AuriTM docking station and connect it to the AuriTM Manager software application.
2. Configuration includes firmware updates, adjusting settings such as default volume, and managing the library of known broadcasts and encryption keys.
3. Refer to the system manual for detailed operating instructions.

FAQ:

• Q: How do I charge the AuriTM RX1 Receiver?
  A: Connect a USB-C power supply or charge it in a docking station. The LED indicator will flash white while charging and stay solid white when fully charged.
• Q: How do I adjust the volume on the receiver?
  A: You can control the volume using the volume control button on the receiver.

Overview

1. Power button
2. Volume control
3. Scan/select
4. Scroll channel list
5. USB-C port
6. Headphone & loop lanyard jacks

First Use

Remove the protective screen cover. The receiver will not activate until charged, connect a USB-C power supply or charge in a docking station and fully charge before use. The receiver LED will flash white while charging and be solid white at full charge.

Basic Operation

1. Press and hold the power button to turn the receiver on. The receiver will turn on automatically when removed from the docking station, or when USB power is unplugged.
2. The receiver will scan for available AuriTM broadcasts and connect to the strongest available, if no broadcasts are found this will be indicated on screen.
3. Plug headphones, ear speakers, earbuds, or compatible neck loop into the headphones and loop lanyard jacks.
4. Activate the display by a momentary press of the power or either front button.
5. Press the front right “scan/ select” button to look for other broadcasts, these will be presented in a list which can be scrolled using the front left button or the volume up and down buttons. Use the “scan/select” button again to connect to the highlighted broadcast.
6. Adjust the volume by pressing the volume up and down buttons.
7. To power down, press and hold the power button for 3 seconds.

Setup

• To configure the receiver it must be placed in an AuriTM docking station and connected to the AuriTM Manager software application. Configuration includes firmware updates, adjusting settings such as default volume, and managing the library of known broadcasts and encryption keys.
• Note: for full operation details consult the system manual.

SUPPORT

www.auriaudio.com

Ampetronic Ltd

• Unit 2, Trentside Buisness Village, Farndon Road, Newark NG24 4XB, United Kingdom
• Phone: +44.1636.610062
• www.ampetronic.com

Listen Technologies Corporation

• 14912 Heritage Crest Way Bluffdale, Utah 84065-4818 USA
• +1.801.233.8992
• www.listentech.com

Copyright © 1998 – 2024 Listen Technologies Corporation®. All rights reserved.

Documents / Resources

Auri RX1 Sound Receiver [pdf] User Guide RX1 Sound Receiver, RX1, Sound Receiver, Receiver

References

• User Manual