aultop ATMS2001 WiFi Smart Timer Instruction Manual
WiFi Smart Timer
- Download and install Mobile App:
Connect your phone to local Wi-Fi first. Use your phone to scan the QR code below to Download and install the App.
- Register Account
Click Add Device
Confirm
Input Wi-Fi password and confirm
Click Done
Click Switch Icon/Power
Now you can control the switch by App - Add New Device
Connect the Device with the mains supply(100-250VAC), for the connection diagrams see section 4.
Press and hold the button for about 5 seconds until the Green LED light blinks fast.
* After holding the switch for 5 seconds, if the LED light is red, press the switch again and you will see the green light blink. - Count down timer
Click “Timer” in the homepage
set Hour and Min.
The timer will be ON or OFF, after steed
Set scheduled programs.
Click “Timer” in the home page
Select “Schedule” on the home page. Click “Add Schedule
Set the time: Hour and Minute. Set the Date
Click Switch 1″ to set the switch ON or OFF
Select ON or OFF. then confirm, and
Can add more schedules - Circulate Function (Allows user to choose days and times to cycle power on and of, ie., On for 30 Min and Offord 5min between Gam and Gym)
Click “Timer” in the home page
Select “Circulate” on the home page, Click “Add Circulate”
Set the Start Time and End Time, set Hour and Min, select the Date
Set Start Curation set Hour and Min. and Confirm
Click “Save” in the upper right corner
Can Add more. - Random Function
Click “Timer” in the home page
Select “Random on the home page, Click “Add Random
Set the Start Time and End Time, set Hour and Min, select the Date
Click “Save” in the upper right corner
Can Add more. - Delay Off (When Load Is Turned On Via App/Manual)
Click “Timer” in the home page
Select “Inching” on the home page. Click to turn on this function. - Astronomical Function set Sunrise time
Click “Timer” in the home page
Select Astronomical and tap Sunrise
Select “Before Sunrise’ or “after” time, select day and save.” - Astronomical Function set Sunset e time
Click Timer” in the home page
Select Astronomical and tap Sunset
Select “before” ‘Sunset, or after” time, Select day and save.” - Modify Device Icon
Click this icon the upper right corner
Click this icon in the upper right corner.
Click “Icon”
Take Photo or Select from Album if no need change Click “Cancel” - Modify Device Name
Click this icon in upper right comer
Click this icon in the upper right corner.
Click “Name”
Change the name, and confirm - Share Device
Click “Timer” in the home page
Click “Share Device” Set the time
Click “Add Sharing”
Input cellphone number. and click “Done” - Create Group
Click “Timer” in the home page
Click “Create Group
Select the device, and confirm
Specification
- Rated Voltage: 100-240VAC 50-60 Hz
- Contact Configuration: 1NO(SPST-NO)
- Wi-Fi Frequency: 2.4GHZ Mounting. DIN RAIL 35 mm (EN 60715)
- Ambient temperature range: -10°C…+60°C
- Can set 30 ON/OFF programs per day or per week.
- Count down time, from 1 Min to 23 hours 59 Mins.
- If the product is disconnected from the network, the timer retains all programs set up by Mobile App and works according to the set programs.
- With memory function, When the product contact is in the close state, after a power failure, the product contacts keep the close state.
- Can be controlled by tactile switch from terminal A1 and A2
- Can be shared with 20 users by Mobile App.
- With Bluetooth function, when the WIFI signal is disconnected for 5 minutes, you can use the mobile APP to control the on and off of the product through Bluetooth.
Connection Diagrams
Dimensions
Documents / Resources
 |
aultop ATMS2001 WiFi Smart Timer [pdf] Instruction Manual ATMS2001 WiFi Smart Timer, ATMS2001, WiFi Smart Timer, Smart Timer, ATMS2001 Timer |
