audio-technica ES945O/FM3 Omnidirectional Condenser Boundary Microphone User Guide
audio-technica ES945O/FM3 Omnidirectional Condenser Boundary Microphone

Included accessories

Rubber isolator (1)
Rubber isolator
Rubber isolator (2)
audio-technica ES945O/FM3 Omnidirectional Condenser Boundary Microphone User Guide
Nut
Nut

How to Mount the product

Table/ceiling hole size (actual size)

When using isolators
When using isolators
When not using isolators
 not using isolators

Example: Mounting on a table

Mounting on a table

Connection procedure

The output connector is an XLR-M type with polarity as shown in the figure below

ES945O/FM3 / ES947C/FM3

Output terminals
Output terminals

ES945O/FM5 / ES947C/FM5

Output terminals
Output terminals

Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.

Cautions for the product

  • Do not subject the product to strong impact to avoid malfunction.
  • Do not disassemble, modify or attempt to repair the product.
  • Do not handle the product with wet hands to avoid electric shock or injury.
  • Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.

Notes on use

  • Do not swing or pull with the cable connected to the microphone to prevent the microphone from becoming disconnected or damaged.
  • Do not wind the cable around the rack or allow the cable to become pinched.
  • The microphone should be placed on a flat, unobstructed mounting surface.
  • Placing any object on a surface (such as a conference table) before its finish is fully cured may result in damage to the finish.

  Switch setting and functions

ES945O/FM3 / ES947C/FM3
Product overview
Product overview

ES945O/FM5 / ES947C/FM5
Product Overview
Product Overview

LED color

icon

1

2

3

OFF

RED

GREEN

YELLOW

 

4

5

6

7

BLUE

MAGENTA

CYAN

WHITE

Dimensions

ES945O/FM3 / ES947C/FM3
Product Overview

ES945O/FM5 / ES947C/FM5
Product Overview

Warranty

Warranty (Please be sure to read the notes below.)

End-User LIMITED WARRANTY information for the USA is available at www.audio-technica.com/usawarranties.
You may also contact Audio-Technica U.S., Inc. to request a written copy of the Limited Warranty at 1-330-686- 2600 or via mail at 1221 Commerce Drive, Stow, OH 44224.

Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
www.audio-technica.com
©2021 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com

 

Documents / Resources

audio-technica ES945O/FM3 Omnidirectional Condenser Boundary Microphone [pdf] User Guide
ES945OFM3, ES945OFM5, ES945OFM3 Omnidirectional Condenser Boundary Microphone, Omnidirectional Condenser Boundary Microphone, Condenser Boundary Microphone, Microphone

References

Leave a comment

Your email address will not be published. Required fields are marked *